This cable by Delock is suitable for connecting a USB-C™ monitor with a resolution of up to 4K Ultra HD (3840 x 2160 @ 60 Hz) to a computer with USB-C™ interface and DisplayPort alternate mode support. This active optical cable is particularly thin and can transmit signals without loss over longer distances. Specification • Connectors: 1 x USB Type-C™ male > 1 x USB Type-C™ male • DisplayPort 1.2 specification • Transmission of audio and video signals • Supports DP Alt Mode • Supports no USB data transfer and no USB charging • Fibre optical cable with low signal degradation • Not affected by electromagnetic interference • Cable diameter: ca. 5.4 mm • Contacts gold-plated • Fixed signal direction • Data transfer rate: DisplayPort 1.2 up to 21.6 Gb/s • Resolution up to 3840 x 2160 @ 60 Hz (depending on the system and the connected hardware) • Supports HDR (High Dynamic Range) • Supports HDCP 1.4 and 2.2 • Colour: black • Length incl. connectors: ca. 25 m System requirements • PC or laptop with a free USB Type-C™ port and DisplayPort alternate mode • Monitor with a free USB Type-C™ (DP Alt Mode) interface Package content • USB-C™ video cable
Keenetic Hero AX1800 Mesh Wi-Fi 6 Router with a 5-Port Gigabit Smart Switch, SFP Combo Port, USB 2.0 and USB 3.0 Ports - Continuous Fast Reliable Internet - Cutting Edge Wi-Fi Coverage - IntelliQoS Traffic Prioritization - Smooth 4K UHD Video Streaming - Cyberthreat Protected & Family Safe - Friendly, Easy to Use Mobile App - Powerful Network Storage & Personal Cloud Hero Wireless Router, Available bandwidth 1800 Mbps Mesh, USB 2.0 USB 3.0, 4x10/100/1000M 1xCombo 10/100/1000M-T/SFP, WPA - Wi-Fi Protected Access WPA2 - Wi-Fi Protected Access, WPA3 Antenna Gain 5 dB, Number of antennas 4 Wireless Frequency Range 2,4 GHz/ 5 GHz, Included Accessories Power adapter, Ethernet cable, Quick start guide Dimensions 214mm x 154mm x 33mm
10/100BaseT(X) (RJ45 pistik) Kompaktne suurus lihtsaks paigaldamiseks QoS toetab kriitiliste andmete töötlemist tiheda liikluse korral IP40-klassile vastav metallkorpus Lai töötemperatuurivahemik -40 kuni 75°C (-T mudelid) EDS-2008-EL seeria tööstuslikel Ethernet-kommutaatoritel on kuni kaheksa 10/100M vaskporti, mis on ideaalsed rakenduste jaoks, mis vajavad lihtsaid tööstuslikke Ethernet-ühendusi. Suurema mitmekülgsuse tagamiseks erinevate tööstusharude rakenduste kasutamisel võimaldab EDS-2008-EL seeria kasutajatel ka teenusekvaliteedi (QoS) funktsiooni ja ringhäälingutormi kaitse (BSP) sisse või välja lülitada välispaneelil asuvate DIP-lülitite abil. Lisaks sellele on EDS-2008-EL-seeria seadmetel vastupidav metallkorpus, mis tagab sobivuse tööstuskeskkondades kasutamiseks, ning valida saab ka kiudoptilisi ühendusi (Multi-mode SC või ST). EDS-2008-EL-seeria seadmetel on 12/24/48 VDC ühekordne toitesisend, DIN-redelile paigaldamine ja kõrgetasemeline EMI/EMC-võime. Lisaks oma kompaktsele suurusele on EDS-2008-EL seeria läbinud 100%-lise sissepõletamistesti, et tagada selle usaldusväärne toimimine pärast kasutuselevõttu. EDS-2008-EL-seeria standardne töötemperatuurivahemik on -10 kuni 60 °C, saadaval on ka laia temperatuurivahemikuga (-40 kuni 75 °C) mudelid.
Supports 1000Base-SX/LX with SC connector or SFP slot Link Fault Pass-Through (LFPT) 10K jumbo frame Redundant power inputs -40 to 75°C operating temperature range (-T models) Supports Energy-Efficient Ethernet (IEEE 802.3az) The IMC-21GA industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/1000Base-SX/LX or selected 100/1000Base SFP module media conversion. The IMC-21GA supports IEEE 802.3az (Energy-Efficient Ethernet) and 10K jumbo frames, allowing it to save power and enhance transmission performance. All IMC-21GA models are subjected to a 100% burn-in test, and they support a standard operating temperature range of 0 to 60°C and an extended operating temperature range of -40 to 75°C.
ADDERLink X200s have been designed for use in applications where up to two computers can have their keyboard, video, audio and mouse control extended up to 300 m (1000 ft.) across CAT5 or higher UTP cable. The ADDERLink X200 provides absolute real time keyboard and mouse performance along with hi-definition, hi-resolution video over a VGA interface. The ADDERLink X200 receiver can also be used as a remote user station for the ADDERView CATx range of KVM switches. Product Codes X200/R; X200A/R; X200AS/R; X200-USB/P; X200A-USB/P; X200AS-USB/P Video performance Industry leading resolutions of: 1920 x 1200 to 50 m (165 ft.) 1600 x 1200 to 200 m (650 ft.) 1280 x 1024 to 300 m (1000 ft.) Video compensation The ADDERLink X200 applies 128 steps of signal compensation enabling fine picture adjustments. Brightness control The ADDERLink X200 offers its own brightness correction to ensure images are crisp, clear and bright. Integrated De-Skew The ADDERLink X200 AS/R model has integrated skew correction with a 300MHz bandwidth (1/4 of a pixel movement at 1600 x 1200 resolution). This removes the video skew issues that can be caused by longer CATx cables. Two port integrated KVM switch Each receiver is fitted with two ports to enable connection to a local and remote computer, or two remote computers. The user can quickly select between these ports using keyboard hotkeys or mouse control. Individual video brightness, compensation and skew settings can be applied to each connection. Flexible system configuration Each receiver may be connected to one or two USB, PS/2 or Sun style computer access modules. Furthermore, the X200 receiver unit may be used as the remote user station for any ADDER CATx KVM switch. Emulated DDC Unless an extender actively supports DDC some wellknown high performance video cards cannot be used at high resolutions. The ADDERLink X200 fully supports DDC. Digital audio 44.1kHz digital stereo audio delivers high fidelity audio for speakers.
ADDERLink XD150FX is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the original user desktop experience. Resolutions up to 2560 x 1600 @60Hz 150m extension distance for OM2 multi-mode fiber 4km extension distance for a single mode fiber. 400m extension for OM4 fiber USB2.0 Hi-speed for mass storage devices USB2.0 (Low, Full, High speed) for keyboard, mouse, tablet and touch screen Bidirectional analog audio (Line in/out with microphone & headphone support) RS232 with RTS/CTS flow control Product Codes XD150FX-MM; XD150FX-SM Perfect digital video, real time control The video extension system is visually lossless with no visible artefacts or latency allowing you to be certain of quality and control whilst seperated from your computer. Single duplex LC fiber cable required Video, USB2.0 and audio all pass along a single duplex LC fiber cable. Flexible extension distances from 150 meters to 4km The unit is fitted with SFP cages allowing different types of fiber to be utilised. Distance is dependent on the cable type and fiber module. See table below for details. USB 2.0 Enables connection of any USB human interface device from mice and keyboards through to touch screens, graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can also be used. EDID management The extender has an intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer. REST API A REST (REpresentational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface. Web interface control The XD150FX can be controlled and monitored via a web interface. Temperature and status are viewable and each function can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information. Plug and Play The AdderLink XD150FX extender is delivered in a zero config state so you can plug in the units and start working with them straight away. There is no need for drivers or software to be installed. Bidirectional CD-quality analog audio The unit delivers CD-quality stereo audio (24-bit sampling at 96kHz) is available to transfer audio between local and remote. A microphone and headphones are also supported.
A high-resolution quad-head KVM extender. High definition video, USB2.0 and audio are transmitted on a single CATx or fiber cable. The ADDERLink™ XD614 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience. Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance HD KVM extension, resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution. Quad-head HD 60 video, USB2.0 (HID) and audio are transmitted on a single CATx or fiber cable. Point-to-point protocol for ultra-low latency. Flexibility between copper and fiber connectivity. Adder’s USB emulation ensures reliable computer bootup.
Antaira LMP-0600 seeria on 6-portiline tööstuslik PoE+ hallatav Ethernet-kommutaator, mis vastab IEEE 802.3at nõuetele ja sisaldab 4*10/100Tx Ethernet-porti, mis toetavad IEEE802.3at/af maksimaalselt 30 vatti pordi kohta, ning 2*10/100Tx Fast Ethernet-porti.LMP-0600-seeria on täielikult hallatav tööstuslik Ethernet-kommutaator, mis toetab standardseid Layer 2 Ethernet-konfigureeritavaid seadistusi koos eelnevalt paigaldatud veebikonsooliga. See tootesari on IP30-klassi ja DIN-riba paigaldatav ning pakub töötemperatuuride vahemiku mudeleid STD: -10°C kuni 70°C ja EOT: -40°C kuni 75°C. See pakub ka kõrget EFT- ja ESD-kaitset mis tahes tööstuslike võrgurakenduste jaoks tehaste automatiseerimise, intelligentsete transpordisüsteemide, elektri- ja kommunaalteenuste, reoveepuhastusjaamade või mis tahes välitingimustes või rasketes keskkondades.OmadusedToetab 4*10/100Tx IEEE 802.3at/af nõuetele vastavat 30W/Port ja 2*10/100Tx Fast Ethernet porti.Võrgu redundantsi tugi: RSTP/MSTP ja G.8032 ERPS (taastumisaeg
Antaira LMP-0602 seeria on 6-portiline tööstuslik PoE+ hallatav Ethernet-kommutaator, mis sisaldab 4*10/100Tx Ethernet-porti, mis toetavad IEEE802.3at/af-i maksimaalselt 30 vatti pordi kohta, ja 2*100Fx (SC- või ST-ühendusega) kiudoptilist porti, mille valikulised versioonid on mitmemoodilised (2Km) ja ühemoodilised (30Km).LMP-0602-seeria on täielikult hallatav tööstuslik Ethernet-kommutaator, mis toetab standardseid Layer 2 Ethernet-konfigureeritavaid seadistusi koos eelnevalt paigaldatud veebikonsooliga. See tootesari on IP30-klassi ja DIN-riba paigaldatav ning pakub töötemperatuuride vahemiku mudeleid STD: -10°C kuni 70°C ja EOT: -40°C kuni 75°C. See pakub ka kõrget EFT- ja ESD-kaitset mis tahes tööstuslike võrgurakenduste jaoks tehaste automatiseerimise, intelligentsete transpordisüsteemide, elektri- ja kommunaalteenuste, vee- ja reoveepuhastusjaamade või mis tahes välitingimustes või rasketes keskkondades.OmadusedToetab 4*10/100Tx IEEE 802.3at/af nõuetele vastavat 30W/Port ja 2*100Fx (SC) kiudoptilist pesa.Fiber toetab: Multi-Mode 2KmVõrgu redundantsi tugi: RSTP/MSTP ja G.8032 ERPS (taastumisaeg
LNP-0800G-M12-67-24 Ethernet-kommutaator pakub 8 Gigabit Ethernet M12 porti, millest kõik 8 on IEEE 802.3at standardile vastavad PoE (Power-over-Ethernet). Lülitid on klassifitseeritud toiteallikaseadmetena (PSE) ja pakuvad kuni 30 vatti võimsust iga pordi kohta.LNP-0800G-M12-67-24 omab laiaulatuslikku töötemperatuuri -10° kuni 60°C, mis võimaldab seda kasutada ka kõige karmimates tööstuskeskkondades.Lisaks sellele tagavad selle M12-liitmikud tiheda ja tugeva ühenduse ning tagavad usaldusväärse töö rakendustes, mis on seotud suure vibratsiooni ja löökidega.Omadused8-portiline 10/100/1000Tx Ethernet koos IEEE 802.3at standardile vastava PoE+-gaRedundantne toitesisendite disain, 24~55VDCSisseehitatud toitevõimendi disain PoE/PoE+ väljundiksSisseehitatud relee väljundi hoiatus toite/PoE rikke korralBypass Design Daisy Chain redundantsi jaoksToetab digitaalset sisendit / digitaalset väljunditIP67 vastupidav veekindel metallist korpuse disainM12 X-kodeeritud liitmik tagab tiheda ja vastupidava ühenduseSeinale paigaldatav5-aastane garantiiKomplektis1 - LNP-0800G-M12-67-241 - Kiirpaigaldusjuhend
Omadused ja eelisedTäielikud Gigabit Ethernet-portidIEEE 802.3af/at, PoE/PoE+ standardidKuni 30 vatti väljundvõimsus PoE-porti kohta24/48 VDC paindlikud redundantsed toitesisendidIntelligentne energiatarbimise tuvastamine ja klassifitseerimineNutikas PoE ülevoolu- ja lühisekaitseTöötemperatuuri vahemik -40 kuni 75°C (T-mudelid) SissejuhatusEDS-G205A-4PoE lülitid on nutikad, 5-portilised, haldamata täis-gigabit Ethernet-kommutaatorid, mis toetavad Power-over-Etherneti pordid 2 kuni 5. Lülitid on klassifitseeritud toiteallikaga seadmeteks (PSE) ja sellisel viisil kasutamisel võimaldavad EDS-G205A-4PoE lülitid tsentraliseerida toiteallika, pakkudes kuni 30 vatti toite iga pordi kohta ja vähendades toite paigaldamiseks vajalikke jõupingutusi.Lüliteid saab kasutada IEEE 802.3af/at standardseadmete (PD) toiteallikana, mis kõrvaldab vajaduse täiendava juhtmestiku järele, ning need toetavad IEEE 802.3/802.3u/802.3x 10/100/1000M, täis/pooldupleks, MDI/MDI-X automaatset tuvastamist, et pakkuda teie tööstuslikule Ethernet-võrgule ökonoomset suure ribalaiusega lahendust.
The certified LogiLink CAT 6a patch cable is ideal for data transfers up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs and the overall shield is made of copper braid. The shielded RJ-45 plugs come with an overmolded slim strain relief and snagless design.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Vert, Gris, Orange, Violet, Rouge, Blanc, Jaune.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Flat UTP Cat 7 Network Cable Vention ICABF 1mNow you can freely play games, download files, work, or watch movies. The Vention network cable provides transfer speeds of up to 10 Gbps, so you don't have to worry about delays or other signal problems. Copper contacts and aluminum foil shielding ensure fast and stable transmission, while the flat design and thickness of just 2.5 mm make cable installation easy. You can easily route it under doors or along walls! The cable also stands out with its wide compatibility – it works perfectly with computers, laptops, routers, and more. BrandVentionModelICABFColorBlackInterfaceRJ45Transmission SpeedUp to 10 GbpsCable Length1m
Discover the Lindy CAT 6a network cable, a high-performance solution designed to meet the demands of modern networking environments. With its advanced features including 26 AWG copper conductors, gold-plated pins, and a bending radius of 72 mm, this cable ensures reliable and high-quality connectivity. The innovative S/FTP, PiMF technology, combined with foil and aluminum braid shielding, minimizes interference, supporting data transmission speeds up to 500 MHz. Safety is prioritized with the use of Low Smoke Zero Halogen (LSZH) materials, reducing harmful emissions in case of fire. Additionally, the cable's snagless design, lockable polycarbonate housing, and compliance with multiple standards, including ISO/IEC 11801, REACH, RoHS, and UL, make it a secure and environmentally friendly choice for any network.
Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
