MS110P 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ - 10 Ports: 10× 10/100 Mbps RJ45 ports with 8 PoE+ ports - Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - 2× Uplink Ports: MS110P provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort - PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
The TP-Link Omada EAP683 UR V1 stands out as a reliable solution in the realm of network devices, offering a blend of high-speed connectivity, advanced security, and seamless network management. Designed to cater to the demands of high-density environments, this wireless access point leverages Wi-Fi 6 technology to enhance bandwidth efficiency and reduce latency. With data transfer rates reaching up to 5952 Mbps and support for both 2.4 GHz and 5 GHz bands, it ensures robust and reliable wireless connections.Security is a priority, and the EAP683 UR V1 addresses this with a suite of encryption algorithms, including WPA3-Personal and Enterprise, ensuring that network communications remain secure. Opportunistic Wireless Encryption (OWE) provides added privacy in open networks. The device's advanced performance capabilities, such as MU-MIMO technology and beamforming, optimize signal strength and direction, enhancing the user experience.Ease of integration and management is facilitated through Omada Mesh technology, seamless roaming, and zero-touch provisioning (ZTP), making network expansion and maintenance straightforward. Remote management protocols, including HTTP, HTTPS, SNMP, and SSH, offer flexible administration options, while features like access control lists, MAC address filtering, and VLAN support allow for comprehensive control over network access and traffic. The TP-Link Omada EAP683 UR V1 is an ideal choice for businesses seeking a high-performance, secure, and easily managed wireless networking solution.
EAP113-Outdoor Wireless, outdoor access point, N300 standardPerfect for outdoor environments: The access point has an IP65-rated housing. Fast Wi-Fi: Wi-Fi speeds reach up to 300Mbps thanks to 2×2 MIMO technology. Long range: High-power amplifier and professional antennas. Omada SDN Integration: Centralized Cloud Management and Intelligent Monitoring. Central management: Cloud access and the Omada application ensure easy and convenient management. PoE support: Support of the 802.3af standard and 48V Passive PoE allows easy installation. Secure Guest Network: Multiple access authentication methods (SMS/Voucher, etc.) and extensive wireless security technologies. Top-class design Thanks to the well-thought-out design of the housing, antennas and flexible power supply and installation options, EAP113-Outdoor is perfect for both inside and outside any building. Detachable antennas EAP113-Outdoor has two detachable omnidirectional antennas, which allows them to be easily replaced if necessary. Long-distance data transmission High transmission power and two powerful omnidirectional antennas make EAP113-Outdoor provide a stable wireless network with a range of up to 200m when located outside the building. Waterproof case designed for outdoor environments The IP65 certificate obtained during testing guarantees that the access point will withstand even the harshest weather conditions. Integration with the Omada SDN platform The Omada Software Defined Networking (SDN) platform integrates network devices such as Access Points, Switches and Routers to provide 100% centralized cloud management and a highly scalable network managed from a single interface. Easy management with the Omada app With easy-to-follow instructions, it only takes a few minutes to configure the settings you need in the Omada app. Monitor the network status, manage clients, change settings at any time, all from your smartphone or tablet.
Zyxel GS-108B v5 ? 8-Port Gigabit Switch 8-port Gigabit switch with plug & play deployment QoS ports ensure stable traffic prioritization Fanless design for silent operation Durable metal housing with wall-mount option Energy-saving operation with IEEE 802.3az support Fast and easy networking for small businesses The Zyxel GS-108B v5 is an 8-port unmanaged Gigabit switch that seamlessly connects workstations, IP phones, storage, and other network devices. With plug & play functionality, it requires no configuration?just connect your devices and enjoy instant networking. QoS ports for prioritized and smooth data flow Four QoS ports (ports 5?8) on the GS-108B v5 are designed to handle critical traffic. Ports 5 and 6 offer medium priority, while ports 7 and 8 provide high-priority performance for demanding applications such as voice over IP. Silent and reliable build The passively cooled, fanless design ensures completely silent operation, making it perfect for noise-sensitive environments. Its sturdy metal housing improves heat dissipation and durability. The switch supports both desktop and wall-mounted installation. Smart energy efficiency built in Supporting IEEE 802.3az Energy Efficient Ethernet, the GS-108B v5 adjusts power consumption based on traffic levels. This enables significant energy savings without compromising network performance. 8 x 10/100/1000 Mbps RJ-45 ports QoS ports: 2 x medium (ports 5?6), 2 x high (ports 7?8) Switching capacity: 16 Gbps Forwarding rate: 11.5 Mpps MAC address table: 4K Packet buffer: 192 KB Jumbo frame support: up to 9 KB Fanless, passively cooled design Power consumption: max. 4.82 W Metal housing, desktop or wall-mountable Compliant with IEEE 802.3az Energy Efficient Ethernet Dimensions: 126 x 51.8 x 24 mm Weight: 0.176 kg
The Zyxel NWA210BE is designed to meet the demands of high-performance wireless networking, offering robust connectivity and efficient management options. This external wireless access point supports a range of wireless protocols, including IEEE 802.11ax (Wi-Fi 6) and Wi-Fi 7, ensuring compatibility with a wide variety of devices. With dual radio capabilities, it can deliver maximum data rates of 688 Mbps on 2.4 GHz, 864 Mbps on 5 GHz, and 11530 Mbps on 6 GHz, catering to bandwidth-intensive applications and multiple users simultaneously.Featuring load balancing, MU-MIMO technology, and band steering, the NWA210BE enhances overall network efficiency and user experience. It also provides various security options, including WPA3 encryption and MAC address filtering, to keep the network secure. The device is cloud-managed, offering seamless remote management through SNMP, CLI, or WEB interfaces, making it a flexible solution for both enterprise and home environments.
Tutvustame Natec Bluetooth 5.0 adapterit, Fly, USB - kompaktne ja mitmekülgne lahendus teie seadmete sujuvaks traadita ühendamiseks. See USB Bluetooth-adapter on loodud uusima Bluetooth 5.0 tehnoloogiaga, mis tagab kiirema andmeedastuse, suurema vahemaa ja suurema energiatõhususe võrreldes varasemate versioonidega. Seda saab hõlpsasti ühendada ja kasutada lihtsa USB-liidese kaudu, mistõttu on see mugav valik kõigile, kes soovivad lisada oma laua- või sülearvutile Bluetooth-funktsioone. "Natec Bluetooth 5.0 adapter toetab mitmesuguseid seadmeid, sealhulgas kõrvaklappe, kõlareid, klaviatuure, hiiri ja muud, nii et seda saab hõlpsasti ühendada, et tagada katkematu ühenduvus tootlikkuse ja meelelahutuse suurendamiseks. Elegantne ja kompaktne disain tagab, et see ei sega teisi USB-porti ja sobib ideaalselt kasutamiseks liikvel olles. Tänu Nateci pühendumusele kvaliteedile ja usaldusväärsusele on see Bluetooth-adapter kohustuslik lisavarustus igale tehnoloogiahuvilisele, kes soovib oma seadmeid traadita funktsioonidega täiendada.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
The Ubiquiti UniFi UACC-Adapter-AC-210W power adapter is designed to deliver reliable performance with a polycarbonate construction that ensures durability and safety. Operating within a temperature range of 0°C to 40°C, this adapter withstands various environmental conditions while maintaining efficiency. With an input voltage range of AC 100 - 240 V and a voltage output of 54 V, it provides a power output of 210 watts, catering to diverse user needs.This wall-mountable adapter is equipped with a 1.5 m cord, allowing for flexible installation options. It meets UL 11353 standard compliance, reinforcing its credibility and safety in usage. Ideal for home and professional settings, the Ubiquiti UniFi power adapter offers energy solutions for all compatible Ubiquiti devices.
PoE ports 8 | PoE power budget 60 Watts | Operating temperature range -10 °C ... 55 °C | Dimensions 184.6 x 103.3 x 27.0 mm | Product Net Weight 0.36 kgGarantii: 36 kuud
netPower Lite 8P Low-cost. Tough. And always ON! Compact PoE switch with built-in UPS and smart battery charger – because your CCTV cameras and access points deserve true off-the-grid resilience.
UniFi Network Attached Storage with (2) 3.5" HDD bays, 2.5 GbE networking, USB-C connectivity, and an included PoE++ adapter, all in a compact footprint.
ASUS RT-BE90U Next-Level Smart Home WiFi 7 Elevate your smart home with blazing-fast tri-band WiFi 7 speeds of up to 9400 Mbps, boosted range with ASUS RF and AI-boosted Smart AiMesh technology. The ASUS RT-BE90U unleashes superior 6 GHz WiFi and ultra-fast 2.5G networking. With next-gen ASUS Network Security and a suite of advanced network technologies such as IoT Network, the RT-BE90U safeguards your network end-to-end, 24/7. Ultrafast WiFi 7 – WiFi 7 (802.11be) tri-band extendable router boosts speeds up to 9400 Mbps, with 320MHz and 4096-QAM increasing a single frequency band’s transmission speed by 2.4 times Unleashing Multi-link operation (MLO) for Ultra-Smooth Connectivity – Link to multiple bands at the same time to ensure stable internet connections and efficient data transfers Quad 2.5G Ports – Traffic via 2.5G ports has top priority, supported by flexible WAN/LAN port configurations to maximize wired connectivity Smart Home Master – Easily establish up to three SSIDs with Smart Home Master for easy IoT device setup and management, instant VPN connections, and convenient parental controls Hassle-free AiMesh Extendable Network – AiMesh extendable routers enable whole home seamless roaming with rich, advanced features Commercial-Grade Network Security – Network security with commercial-grade AiProtection, plus a one-tap security scan and Safe Browsing 4G LTE/5G mobile tethering – Supports 4G LTE/5G mobile tethering for always-on internet
The RB912 is also available in an outdoor enclosure, fit with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Dell Adapter - USB 3 to Ethernet Type Adapter Interface SuperSpeed USB 3.0 to Gigabit Ethernet x 1 Color Black Dimensions 2.03 cm x 15.2 cm x 1.52 cm (WxDxH) Communication interface Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Protocols 10Mb LAN, 100Mb LAN, GigE Warranty Terms 1 year warranty
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
