The Ubiquiti UniFi Pro XG 8 PoE delivers network performance, suitable for demanding environments. This switch supports a capacity of 1000 IPv4 routes and 128 ARP entries, allowing seamless connectivity for multiple devices. With eight versatile ports, including 10/100/1000/2.5G/5G/10GBase-T and two 10 Gigabit SFP+ connections, the Pro XG facilitates robust networking solutions. Its PoE budget of 155 W ensures that connected devices receive sufficient power, streamlining installation and management. Designed for reliability, the Pro XG operates within a temperature range of -5°C to 45°C and maintains performance in varying humidity levels of 10% to 90%. The switch incorporates features such as flow control, VLAN support, and quality of service (QoS), enhancing network performance and security. With support for Link Aggregation Control Protocol (LACP) and advanced IGMP configuration, managing larger networks becomes straightforward. The fanless design ensures silent operation, suitable for office or home environments.
A42G-HBEP | Dual-band (2.4 GHz / 5 GHz) | Wi-Fi 7 (802.11be) | Ethernet LAN Yes | Ethernet LAN interface type 2.5 Gigabit Ethernet | 4xEthernet LAN (RJ-45) ports | USB port Yes | Operating temperature (T-T) -40C to +50C C
Industrial LTE Cat 1 Gateway Board TRB145 is equipped with RS485 Interface, Digital Inputs/Outputs and micro-USB port. TRB145 compact design makes this Gateway perfect for an application where a sole gadget must be remotely controlled over RS485 interface. TRB145 is engineered to be used in Industrial applications therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.HardwareMobileLTE(Cat1)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTERS485Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200Input/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketOptional power sourcePossibility to power device over 6 pin RS485 connector’s spare terminals.Configuration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)RS485 related servicesModbus, Serial over IP, NTRIPRemote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight30 g
If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection.Overall it has two 40 Gbps QSFP+ ports and twenty four 10 Gbps SFP+ ports, which provides total nonblocking throughput of 320 Gbps and switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets.CRS326-24S+2Q+RM is easy to manage – it has a full size USB port for configuration and dual power supply for redundancy – no unexpected downtime, your clients and colleagues will be thankful!You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. Switching results CRS326-24S+2Q+RM Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Switching Non blocking Layer 2 throughput 26,015.9 315,937.5 75,211.5 308,066.2 476,339.3 243,885.7 Switching Non blocking Layer 2 capacity 26,015.9 631,874.9 75,211.5 616,132.3 476,339.3 487,771.4 Switching Non blocking Layer 1 throughput 26,015.9 320,100.0 75,211.5 320,100.0 476,339.3 320,100.0 Switching Non blocking Layer 1 capacity 26,015.9 640,200.0 75,211.5 640,200.0 476,339.3 640,200.0
TRM240 is an Industrial LTE Cat 1 Modem with rugged aluminium housing, USB interface and external antenna for better signal coverage. This product is backwards compatible with 3G and 2G technologies and is the most cost-efficient option for upgrading existing industrial and public infrastructure with modern M2M connectivity.Industrial Cellular LTE Cat 1 Modem TRM240 is a compact and simple connectivity device able to provide cellular capabilities to equipment across all market segments. It is backwards compatible to 3G and 2G therefore it is the universal choice when it comes to large scale connectivity upgrades for Industrial or Public infrastructure. It offers long and stable lifecycle important for IIoT projects, because you can use conventional cellular technologies and enjoy more cost-efficient data plans using LTE Cat 1. TRM240 comes with USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
AX3000 Wi-Fi 6 Bluetooth 5.2 PCIe Adapter - Unrivalled Wi-Fi 6 Speed—Breaks the gigabit barrier with speed up to 2402 Mbps (5 GHz) + 574 Mbps (2.4 GHz) - Smoother Experience—75% lower latency ensures ultra-responsive gaming, uninterrupted video chatting, and seamless live streaming - Reliable Connections—Intel® Wi-Fi 6 chipset brings faster and clearer Wi-Fi to fully unlock the potential of your Wi-Fi 6 router - Wider Signal Coverage— Connect to your Wi-Fi in more parts of your home with two external high-gain antennas ensuring greater coverage and enhanced stability - Bluetooth 5.2—The latest Bluetooth technology achieves Faster Speed and Broader Coverage than the previous version - Improved Security—The latest security enhancements WPA3 provides enhanced protection in personal password safety - Fine Crafting—Specialized heatsink and gold plating is crafted to improve stability and reliability even in hot environments - Backward Compatibility – Full support for 802.11ac/a/b/g/n standards
Mercusys AX3000 Whole Home Mesh WiFi 6 System with PoE Halo H80X (3-Pack) 802.11ax 574+2402 Mbit/s 10/100/1000 Mbit/s Ethernet LAN (RJ-45) ports 3 Mesh Support Yes MU-MiMO Yes No mobile broadband Antenna type Internal
PLUG-N-PLAY Plug-n-Play, ei vaja lisakonfiguratsiooni MOUNTING Sisseehitatud DIN-kandur ja pinnapealse paigalduse võimalused 9-30V Lai valik toetatud toitepingeid TÖÖSTUSLIK DISAIN Anodeeritud alumiiniumist korpus ja paneelid -40 °C KUNI 75 °C Lai töötemperatuurivahemik ETHERNET 5 x Ethernet-porti kiirusega kuni 100 Mbit/s TSW010 pakub kõige taskukohasemat võimalust laiendada võrguühendust mitme Ethernet-seadmega. Viis 10/100 Ethernet-porti tagavad stabiilse ja usaldusväärse ühenduvuse, mis on piisav enamiku tööstuslike rakenduste jaoks, kus ei ole vaja suurt läbilaskevõimet. Lai valik toetatud toitepingeid (9-30 V) ja vastupidav konstruktsioon muudavad selle sobivaks professionaalseteks lahendusteks. Kompaktne suurus ja integreeritud DIN-kandur võimaldavad lihtsat paigaldamist erinevates tööstuskeskkondades. Translated with www.DeepL.com/Translator (free version)
JetStream 52-Port Gigabit L2+ Managed Switch with 48-Port PoE+ - 384 W PoE Budget: 48× 802.3at/af-compliant PoE+ ports with a total power supply of 384 W*. - Full Gigabit Ports: 48× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Static Routing: Helps route internal traffic for more efficient use of network resources. - Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. - Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. - Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities.
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-30W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-30W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
Xiaomi Mesh System | AC1200 EU (1-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
Uusima tehnoloogiaga WiFi 6 ruuter; Kiirus kuni 1201 Mbps (5 GHz) & 300 Mbps (2,4 GHz); 4 antenni võimendavad signaali üle terve kodu; Kolm Gigabit LAN & üks WAN pesa; Parendatud küberturvalisus, nutirakendus
wAP LTE kit is a tiny weatherproof wireless access point for installation outside your house, in the garden, on your porch, or in any other challenging environment where you need a capable wireless connection on the tightest budget possible. It features an Ethernet port with passive PoE-in, but there are more ways to power this affordable access point: there’s also a standard DC jack and an automotive plug. The new revision features a new LTE modem that offers improved connectivity, the addition of the popular B28 band, and a massive price drop! wAP LTE kit is weatherproof and can be fixed to any external wall from the inside of the case – for extra security and less visible attachments. The bottom part can also be secured with a special anti-vandal screw, which can only be opened by the owner. There is an opening in the back of the case, allowing you to run the Ethernet cable directly behind the unit and through the wall. This way the wAP attracts less attention and blends into any environment.
Fast WiFi 6 - Break the gigabit barrier with speeds up to 1201 Mbps (5 GHz) + 574 Mbps (2.4 GHz). Dual Band Wireless - 2.4 GHz and 5 GHz bands for flexible connectivity. Lower Latency Gameplay - OFDMA and MU-MIMO ensure the most efficient WiFi connection for your PC. Improved Security - WPA3 provides the latest security enhancements for personal password protection. Nano design – Small, unobtrusive design allows you to plug it in and forget it is even there. Setup Made Easy - TX20U Nano comes with its driver pre-loaded. Just plug and install.
NTP001 on stratum-1 Teltonika NTP-server, mis on mõeldud täpse, UTC-järeldatava aja sünkroniseerimiseks nii avalikes kui ka privaatvõrkudes, ilma et oleks vaja Interneti-ühendust. See odav NTP-server säilitab GNSS-funktsiooni abil täpse, UTC-järeldatava aja. Plug-and-play-funktsionaalsus, mitmesugused liidesed, sealhulgas RS232 ja RS485, ning tugev turvaprofiil teevad NTP001-st täiusliku NTP-serveri teie võrku.VÕRGU AJA SÜNKRONISEERIMINETäpne ja odav NTP-serverMITU LIIDESTRJ45, RS232, RS485 ja sisend- ja väljundühendusedTURVALISUSAutentimine, juurdepääsukontroll ja muuPLUG-AND-PLAYLihtne paigaldamine ja konfigureerimine minimaalse vaevaga
Kuni 3,6 Gbps kiirus Dual-Band WiFi • 2 × 1 Gt porti (WAN/LAN automaatne tuvastus) • Katab kuni 600 m² pindala • Lihtne kasutuselevõtt • Kolme mesh-ruuteri süsteem
2.4GHz, 29.4x8x3cm, 11dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.50+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 11dBi dual-polarity gain at 2.4GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
