Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
airFiber 11Breaking free from the congested 5 GHz band, airFiber® 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.Features: Full duplex Point-to-Point radio 11 GHz frequency operation Up to 1.2+ Gbps throughput Proprietary INVICTUS™ processor Integrates with airFiber® 11 GHz antennas Utilizes distinct Rx and Tx frequencies Accepts PoE or DC power Secure 128-bit AES encryption Power Source Options Support for PoE or DC power gives you the flexibility to power the AF-11 separately from Ethernet traffic. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Channel Configuration The airFiber AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific licensing requirements. The AF-11 also features different channel widths to suit your deployment needs, and you can independently configure TX and RX channel frequencies
Ubiquiti POE-24-30W-G-WHis a PoE adapter designed to power various Ubiquiti devices. Compatible with most products (check the device specification before determining compatibility): airFiber airMAX EdgeMAX mFi UniFi AP UniFi Video / airVision. Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors. Ubiquiti PoE Adapter Compatibility with the airGateway™ Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network. The airGateway is available in three models: airGateway Standard model with an internal antenna airGateway Pro Dual-Band Wi-Fi model with an internal antenna airGateway-LR Long-range Wi-Fi model with an external antenna for extended range The airGateway plugs into any of these PoE Adapters: Model Number Compatibility POE-15-12W ✓ POE-24-12W ✓ POE-24-12W-G ✓* POE-24-7W ✓* POE-24-12W-G-WH ✓* * airGateway maximum LAN port speed: 100 Mbps
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
Outdoor AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice.MTP250-53V47-OD can output 53V 250W while the MTP250-26V94-OD works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.The voltage will depend on your setup – take a look at the “DC jack input Voltage” in the Power input specifications of the desired devices. In our example the home access points are designed for 12-30 V power supplies so we are using the MTP250-26V94-OD. If you have a setup demanding higher voltage – like a net of PTZ security cameras you could use the MTP250-53V47-OD instead. Always check the necessary voltage before powering your devices!
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
See Delocki M.2 dokkimisjaam võimaldab paigaldada kaks M.2 PCIe NVMe SSD-d ja seda saab ühendada USB kaudu arvutiga või sülearvutiga. Kaasasolev USB-kaabel võimaldab ühendamist vabasse USB-C™-porti. M.2 PCIe SSD kloonimise funktsioon Kloonimisfunktsioon võimaldab kopeerida ühe SSD sisu teisele ilma arvutit kasutamata. Ideaalne testimisvahend Mälu ühendatakse lihtsalt vastupidavasse korpusesse ja seda saab kohe kasutada. Ei ole vaja kruvisid, tööriistu ega lisaseadmeid, mis tähendab, et SSD-d saab kiiresti vahetada. Spetsifikatsioon - Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane 2 x 67-pinniline M.2 võtme M pesa 1 x USB Type-C™ female (toiteallikas) - Kiibistik: Asmedia ASM2362 - Toetab M.2-mooduleid M- või B+M-klahviga PCIe (NVMe) baasil - Toetab NVM Express (NVMe) - Andmeedastuskiirus kuni 10 Gbps - Toetab UASP - LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta - Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti - Mõõtmed (LxSxK): ca. 72 x 79 x 18 mm - Hot Plug, Plug & Play Toiteallika spetsifikatsioon - Seina toiteallikas - Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 0,6 A - Väljund: 5,0 V / 3,0 A Süsteeminõuded - Android 10.0 või uuem - Chrome OS 83.0 või uuem - Linuxi 5.4 või uuem - Mac OS 10.15.6 või uuem - Windows 8.1/8.1-64/10/10-64 - Vaba USB Type-C™ pordiga või vaba Thunderbolt™ 3 pordiga seade Paketi sisu - M.2 dokkimisjaam - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 45 cm - Kaabel USB-C™ isane USB Type-A isane, pikkus ca. 80 cm (toiteallikas) - Väline toiteallikas - Kasutusjuhend
Der DMG-36 ist ein 2in1 WLAN- & Bluetooth 5.2-Adapter. Er ermöglicht es, den PC mit dem WLAN-Netzwerk zu Hause oder im Büro zu verbinden. Der WLAN (802.11 a/b/g/n/ac/ax (Wi-Fi 6)) PCIe-Adapter ist mit einem modernen MediaTek MT7291 Chipsatz und zwei 6dBi starken Antennen ausgestattet und bietet mit Geschwindigkeiten von bis zu 5400 Mbit/s im 2,4GHz oder 5GHz Netz die ideale Basis für ein High-Speed Datentransfer. Neben der WLAN-Funktion bietet der DMG-36 auch eine Bluetooth 5.2- Schnittstelle und ermöglicht Ihnen so Ihren Computer mit einem Smartphone, Tablet oder einem anderen Bluetooth Gerät zu verbinden.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Charge smartphones and tablets directly from the wall socket! With the DIGITUS USB charging box you can even charge 3 smartphones or tablets at the same time. Charge one USB-C device with up to 14 W (5 V / 2.8 A) and two USB A devices with up to 14 W (5 V / 2.8 A). For example, you can charge your smartphone and your tablet simultaneously with a total available charging capacity of 15.5 W. Protect yourself and your family with the integrated electronic short circuit and overload protection in the USB ports. Upgrade your existing electrical installations and enjoy being able to charge your USB devices at any time, directly from the wall socket.
Lanberg's toolless Cat.5e UTP RJ45 keystone can be mounted in any adapter having appropriate connectors with dimensions (height x width) of 16,10 x 14,50mm e.g. inside of adapters for 45x45 sockets, electrical equipment frames or modular panels - therefore, the overall list of applications for this particular keystone module is very wide. RJ45 socket has an IDC connector cover and a 568A / B colored connection sequence designation.
Aruba CX 6100 lülitite seeria on kaasaegne algtaseme juurdepääsulülitite perekond, mis sobib ideaalselt harukontoritele, keskmise turuga ettevõtetele ja SMB võrkudele. Usaldusväärseks, lihtsaks ja turvaliseks juurdepääsuks loodud Aruba CX 6100 lüliti pakub mugavat juhtmega juurdepääsulahendust ettevõtete võrkudele, mis toetavad asjade Interneti-, mobiili- ja pilverakendusi. Valmistage oma võrk ette ettearvamatuteks nõudmisteks võimsa Aruba ASIC-arhitektuuri ja programmeeritava AOS-CX operatsioonisüsteemiga, mida kasutatakse kogu Aruba CX-i portfellis, et pakkuda ühtsemat ja tõhusamat operaatorikogemust. Sellel lülitite seerial on mugavad sisseehitatud kiired üleslingid, mis toetavad IoT-seadmeid, nagu turvakaamerad ja traadita AP-d. Kompaktne ja ventilaatorita mudel sobib ideaalselt kasutamiseks vaiksetes tööruumides.
