Gigabit PoE Splitter, Compliant with IEEE 802.3af/802.3at PoE standards, 2 10/100/1000 Base-T Gigabit Ethernet Ports, Intup voltage: 54V DC (PoE), Output voltage: 5V/9V/12V DC, Output power: up to 30W, Designed to deliver both data and electrical power to FE or GE devices without PoE support using the Cat5 Ethernat cable (such as Wireless Access Points, Network Camera, VoIP Phone and etc.)
Original part number PP12-1.5M/B Product name Gembird patchcord RJ45, cat.5e, UTP, 1.5m, blue Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 1.5 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Boot non-snag-proof Colour Blue
Original part number NIC-GX1 Product name Gembird 1-GIGABIT PCI-Express Fast Ethernet Card, Realtek chipset Producer Gembird Class of product Network card LAN network architecture GigabitEthernet Destination. PC computer External connector RJ45 Type of bus connector PCI-E 1x Wake On Lan function no data Operating system Microsoft WindowsMac OSUNIXLinux Supported protocols and standards IEEE 802.3ab - 1000BaseTIEEE 802.3u - 100BaseTXIEEE 802.1Q-in-Q - VLAN TagIEEE 802.1p - PriorityIEEE 802.3x - Flow Control Chipset Realtec Additional information Single STP RJ45 port for either1000 Mbps, 100 Mbps or 10 Mbps network speedsSupports speed auto-negotiation, pair swap/polarity/skew correctioncrossover detectionAutomatic IRQ and I/O address setupSupports Full Duplex flow control (IEEE 802.3x), power saving, Wake-on-LANremote wake-up, PCI Message Signaled Interrupt (MSI)Chipset: RTL8111CDimensions: 120 x 80 x 20 mm, x1 slotNet weight: 32 g
16 x Gigabit PoE+ ports246 W PoE budget32 Gbps switching capacitySturdy metal switchRack mount brackets includedLimited Lifetime WarrantyTRENDnet’s 16-Port Gigabit PoE+ Switch, model TPE-TG160g, offers 16 x Gigabit PoE+ ports, a 32 Gbps switching capacity, and a PoE power budget of 246 Watts. This rugged metal switch comes with a rack mount kit.PoE Camera Flexibility The switch recognizes non-PoE, PoE (15.4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.Full PoE Power The large 246 Watt PoE power budget supplies full PoE power to every port, thereby maximizing the number of allowable connected PoE devices.Gigabit Networking All Gigabit ports produce a 32 Gbps switching capacity and support Jumbo Frames up to 10 KB. PoE+Supplies up to 30 Watts of power per port with a 246 Watt PoE budgetPorts16 x Gigabit PoE+ portsSwitching Capacity32 Gbps switching capacityJumbo FrameSends Jumbo Frames (up to 10 KB) for increased performanceEnergy SavingsEmbedded GREENnet technology reduces power consumptionRack MountableRack mountable metal enclosure with included mounting kitLED IndicatorsLED indicators convey port status
Ubiquiti PoE POE-24-12W, 24VDC @ 0.5A, Fast Ethernet Accessory Name POE 24V - 12W Package Type Retail Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pieces in pack 1 Packs in Box 1
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch TI-PG541i (Version v1.0R) Hardened IP30 rated metal enclosure with integrated DIN-Rail mount Wide operating temperature range - 40 to 70 °C (-40 to 158 °F) 4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot 120 Watts total power budget Dual redundant power inputs and alarm relay output CLI (Telnet), Web (HTTP), SNMP v1/2c management 802.1Q/MAC-Based VLAN and IGMP Snooping support 802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR) QoS support Power supply sold separately (models: 48VDC3000 / TI-S24048 / TI-S12048) TRENDnet’s 6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch, model TI-PG541i, has four Gigabit PoE+ ports, one Gigabit port, one Gigabit SFP slot and a 120 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate within a wide temperature range (- 40 – 70 °C (- 40 - 158 °F)) for harsh environments. L2 management include features such as PoE port control, VLAN, multicast, and QoS which allow for network integration flexibility. Industrial Hardened Design Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 70 °C (- 40 - 158 °F)) for harsh environments. Integration Flexibility Managed features include PoE per port control/priority/scheduling/power delay, 802.1Q/MAC-based VLAN, IGMP snooping, per port bandwidth control/802.1p/DSCP/queue scheduling, and SNMP trap/RMON/SMTP alert/syslog/port mirror for monitoring and flexible network integration. Fault Tolerance Features dual redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure Full PoE+ Power Budget Supplies up to 30 Watts of PoE/PoE+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt PoE power budget Network Ports and Capacity 4 x Gigabit PoE+ ports, 1 x Gigabit Port, and 1 x Gigabit SFP slot allow for a 12Gbps switching capacity Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Full PoE Control Per Port PoE control features include enabling/disabling PoE and class, power priority, PD alive check, scheduling, and power delay per port using CLI or web management. L2 Management Managed features include 802.1Q, /MAC-Based VLAN, IGMP v1/2/3 Snooping, per port bandwidth control/802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR), and Storm Control for flexible network integration. System Monitoring Monitoring features include SNMPv1/v2c, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, and port mirroring. Redundant Power Dual redundant power inputs (primary and RPS) with overload current protection Alarm Output Alarm relay output triggered by power failure of primary and/or redundant power (DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10K) Wide Temperature Hardened switch is rated for an operating temperature range of - 40 to 70 °C (-40 to 158 °F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, PoE, and network port status Grounding Point Grounding point protects equipment from external electrical surges
TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.PoE PowerA 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.Fault Tolerance Features dual redundant 12 – 56 VDC power inputs with output alarm relay.Industrial Hardened DesignEquipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slotsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 12 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)Alarm Relay Alarm relay triggered by power failure of primary and/or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL9004.
Original part number PP6U-1M/B Product name Gembird patchcord RJ45, cat.6, UTP, 1m, blue Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 1 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Blue
RouterBOARD RB922UAGS-5HPacD is a very versatile wireless router, perfect for assembling your own solution. It supports the new 802.11ac standard for high speed wireless (up to 866Mbit datarate and 20/40/80MHz channels). The device has ports and slots for many uses: 1x SFP cage, miniPCIe slot with SIM for 3G/4G modem or another wireless card, USB port, Gigabit Ethernet port and two MMCX connectors for the built in powerful 1300mW 802.11ac 2x2 radio. Comes with RouterOS L4 (AP) license.
Original part number U3METALGLAN Product name i-tec USB 3.0 Metal Gigabit Ethernet Adapter 1x USB 3.0 to RJ-45 LED Producer iTec Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type 1x female USB 3.0 A-type Plug 2 type 1 x RJ45 Other information Other information Colour Space Gray Additional information 1x USB 3.0 connector, for connecting to a laptop, tablet or PC1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speedsSupports Wake-on-LAN, Jumbo frame up to 9k bytes, detection of cable crossoverSupport IEEE 802.3az (Energy Efficient Ethernet)IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loadingChipset Realtek RTL8153Powered through USB bus, no power adapter is neededOS: Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS, Linux, Android More info i-tec USB 3.0 adapter metal Gigabit Ethernet
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
