Tootja: Gembird Tootegrupp: tööriist/tester tööriista tüüp: Crimp tool for RJ45 (8P8C) plugs, Crimp tool for RJ12 (6P6C) plugs, Crimp tool for RJ11 (4P4C) plugs Lisaandmed: universaalne modular Crimping tool, sobib all 8P8C, 6P6C ja 6P4C modular plugs, Materials laius: 184 mm kõrgus: 70 mm sügavus: 15 mm Netokaal: 280 g
Ubiquiti's adjustable EdgeRouter Rack Mount Kit allows you to install the various smaller Edge Products like the ER-4 and ER-6P into 19 inch racks. The mounting ear on one side slides in and out to accommodate various sized devices.
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
