GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
LevelOne KILBY 28-Port L3 Lite Managed Gigabit Fiber Switch GTL-2872The GTL-2872 switch is a Gigabit Ethernet access switch with four 10G uplink ports. The switch is ideal for Internet Service Providers (ISPs) and Multiple System Operators (MSOs) to provide home users with triple-play services with up to Gigabit bandwidth. It is also an ideal Gigabit access switch for SMB, enterprise, and campus networks. The GTL-2872 switch is packed with features that bring high availability, comprehensive security, robust multicast control, and advance QoS to the network edge, while maintaining simple management. The switch also supports the most advance IPv6 management, IPv6 security, and IPv6 multicast control in accordance with the growth of IPv6 deployment. ISPs can expand their services from home to business users by providing a more reliable and resilient network (ITU-T G.8032 ERPS), L2 VPNs, and advanced OAM (Operations, Administration, and Maintenance) functions to ensure service-level agreements.Standards:IEEE 802.3 10-BASE-T, EthernetIEEE 802.3u 100-BASE-TX, Fast EthernetIEEE 802.3ab 1000BASE-T, Gigabit EthernetIEEE 802.3ad Link Aggregation Control ProtocolIEEE 802.3ae changeable (10GBASE-SR/LR/ER)IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers, and 10G DAC/AOCIEEE 802.3x Flow ControlIEEE 802.3x for full duplex mode , Back-Pressure for half duplex modeIEEE 802.1D Spanning Tree Protocol (STP)IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)Memory: Flash 256MBBuffer Memory: DRAM 512MBPort:20 x 1G SFP port4 x 10/100/1000 (RJ45/SFP) Combo port4 x SFP+ 10 Gigabit Uplink Port1 x RJ45 Console portIndicator: PWR, DIAG, LINKPower Input: 100-240VAC, 50-60HzDC Power Input (48-60VDC)Power Consumption: 21.48WBackplane (Gbps): 128GbpsMAC Address Table: 16KPower Saving: IEEE 802.3az Energy-Ef?cient Ethernet (EEE)Operating Temperature (°C): 0ºC ~ 50ºCOperating Humidity (Non-condensing): 10% ~ 90%Storage Humidity (Non-condensing): 10% ~ 90% General:Tri-speed (10/100/1000BASE-T) copper interfacesAuto-negotiation for port speed and duplex modeAuto MDI/MDI-XDigital Diagnostic Monitoring (DDM) on 10G SFP+ port onlyVLANs:Supports 4K VLANPort-based VLANIEEE 802.1Q VLANGVRPVLAN TrunkingIEEE 802.1v Protocol-based VLANIP Subnet-based VLANMAC-based VLANTraffic SegmentationL2 Virtual Private NetworkQ-in-QVLAN TranslationL2 Protocol tunneling (xSTP, CDP, VTP & PVST+)CDP/PVST+ FilteringIGMP Snooping:IGMP v1/v2/v3 snoopingIGMP Proxy reportingIGMP FilteringIGMP ThrottlingIGMP Immediate LeaveIGMP QuerierOAMIEEE 802.3ah LinkIEEE 802.1ag Connectivity Fault Management :Connectivity checkLoopbackLinktraceITU-T Y.1731 Performance and Throughput Management:Frame DelayFrame Delay variationIPv4/IPv6 dual protocol stackSecurity:Port securityIEEE 802.1X port based and MAC based authentication Dynamic VLAN Assignment, QoS AssignmentMAC authentication Web authentication Voice VLANGuest VLANL2/L3/L4 Access Control ListPrivate VLANRADIUSPort IsolationWeb-based GUIManagement:CLI, WEB, TELNETL3:IPv4 static routeIPv6 static route Packet Forwarding Rate: 95MppsJumbo Frame (K): 9KBSwitching Capacity: 128Gbps
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two self-tapping screws.
TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.HardwareMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 gMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 g
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two screws.
Throughput: 48 Forwarding rate: 1488 Packet buffer: 3.5 MAC address table size: 16000 Jumbo frame size: 9 Number of VLAN groups: 0 Power consumption: 15.7 Mean time between failures (MTBF): 336072 Weight: 0.76
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 8 tk Toetatud protokollid ja standardid: PoE - Power over Ethernet võrgukiht: 2 arvutikorpuse tüüp: metal maksimaalne energiatarbimine: 60 vatti Standard tarvikud: toiteplokk Lisaandmed: väljund pinge värv: must andmeleht: Vendor Page
Small and sleek, yet powerful, the 802.11ac 4x4 AP is ideal for enterprises, businesses, and homes. The modern yet discreet design allows placement near users for optimal performance.Features: 802.11ac Wave 2 Technology 5 GHz Radio: 802.11ac Wave 2, 4x4 MU-MIMO with Radio Rate of 1.733 Gbps 2.4 GHz Radio 802.11ac: 2x2 MIMO with Radio Rate of 300 Mbps Indoor and Outdoor Use Tabletop, Wall, and Pole Mounting Brackets Included Seamless Integration and Management with UniFi Network Solution
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
