Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
The Liebert IntelliSlot Unity Communications interface card provides access to Trellis, LIFE Services and Liebert Nform as well as access to the Web, data from environmental sensors and external client protocols for Vertiv devices. The cards use Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications.
AC1300 Whole Home Mesh Wi-Fi System - One Unified Network – With advanced Mesh Technology, Halo units work together to form a single unified whole home network with one WiFi name and password. - Seamless Roaming – Automatically switch between Halos as you move around your home, always getting the best signal to enjoy the fastest connections for all your devices. - Whole Home Coverage – Blanket up to 2,800 ft² (260 m²) with high-speed WiFi, eliminating WiFi dead zones at your home. - 1.3 Gbps Dual Band WiFi – Halo H30G provides fast and stable connections up to 100 devices with speeds of up to 1,300 Mbps and works with major internet service providers (ISPs) and modems. - Easy App Control – Use the MERCUSYS App to quickly set up and manage your WiFi. - Full Gigabit Ports – 2× Gigabit ports per Halo unit for lightning-fast wired connections
Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment. Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance. Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs. Transport Networking PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation. Fiber-optic Networking for ISPs, Enterprises, and Homes With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
16 x Gigabit PoE+ porti (kuni 30W portide kohta) 2 x Gigabit SFP-pesa 240W PoE võimsuse eelarve 36Gbps kommutatsioonivõimsus Sisemine toiteallikas Tugev 1U 19" rack-paigaldatav metallkorpus TRENDneti Haldamata Gigabit PoE+ kommutaatorid pakuvad suure ribalaiusega jõudlust, kasutusmugavust ja usaldusväärsust. Need IEEE 802.3at standardile vastavad kommutaatorid on mugavalt varustatud tugeva 1U 19" rack-paigaldatava metallkorpusega, mille paigaldusklambrid on kaasas. Need SFP-pesadega Gigabit PoE+ lülitid toetavad ka pikamaa kiudoptilise võrgu rakendusi. Paigaldajad ja integraatorid saavad TRENDneti haldamata gigabit PoE+-switchide abil säästa seadmekulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE+-toite ja andmeid pordi kohta olemasolevate Ethernet-kaablite kaudu. Nende SFP-toega usaldusväärsete gigabit PoE+-switchi abil saate hõlpsasti võrku ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ-kaameraid, digitaalseid sildid, IPTV-dekoodereid ja juurdepääsukontrolli seadmeid.
Seda Delocki kaablit kasutatakse jadaühenduse pikendamiseks ja seda saab kasutada erinevate D-Sub 9-poldilise pistiku abil ühendatud seadmete ühendamiseks. Spetsifikatsioon - Liitmikud: 1 x D-Sub 9-pin isane > 1 x D-Sub 9 pin emane - Kruvidega ühendused - Kaabli gabariit: 30 AWG - Pikkus koos pistikutega: ca. 5 m - Värv: beež Süsteeminõuded - Vaba 9-pooluseline D-Sub-liitmik
Delock USB-muundur eraldab elektrilise ühenduse Host-PC ja USB-seadme vahel. Galvaaniline eraldamine väldib häirivaid helihäireid ja ebatäpseid mõõtmistulemusi laboratooriumis. Kompaktne seade toetab USB 1.1 spetsifikatsiooni madala ja täiskiirusega.
UDC-1 cables for uplinks between the UniFi switch and the SFP ports.1Gbps or 10Gbps capacitiesThe cable is copper and incorporates SFP modules.Designed for UniFi switches to chain between communication cabinets/boxes.SFP+ 10G passive copper cables can be used for short distance 10Gbps transmission. Transceiver cables are perfect solution for a server room applications.
RG-RAP1200(P), Reyee Wi-Fi 5 1267Mbps Wall-mounted Access Point Dual-radio performance, full gigabit wall-mounted access point Better experience with MU-MIMO under 802.11ac Wave2 Multi-service support with full gigabit ports Easy installation and full compatibility Optimization in one-click mode, achieving better Wi-Fi experience Easy Wi-Fi network construction within 3 minutes
