Category 6 twisted pair network cable for connecting network components with RJ45 connectors, such as switches, routers, sockets, patch panels, network cards. Suitable for Gigabit connections (1Gbps) at a frequency of max. 250Mhz. Technical details 2x RJ45 plug shed Injected anti-kink protection and latch protection Red colored RJ45 connector for quick distinction S / FTP cable, Cat.6 Core cross section AWG27 with solid copper strands Total braid shielding and PiMf - in pairs in metal foil (old designation: S-STP PiMf) PVC jacket with length indication on the plug 1: 1 assignment according to EIA / TIA 568B Gigabit capable in resealable, POS-compatible PE bag with EAN code
Category 6 twisted pair network cable for connecting network components with RJ45 connectors, such as switches, routers, sockets, patch panels, network cards. Suitable for Gigabit connections (1Gbps) at a frequency of max. 250Mhz. Technical details 2x RJ45 plug shed Injected anti-kink protection and latch protection Red colored RJ45 connector for quick distinction S / FTP cable, Cat.6 Core cross section AWG27 with solid copper strands Total braid shielding and PiMf - in pairs in metal foil (old designation: S-STP PiMf) PVC jacket with length indication on the plug 1: 1 assignment according to EIA / TIA 568B Gigabit capable in resealable, POS-compatible PE bag with EAN code
8 x Gigabit PoE+ ports Internal power supply 240W PoE power budget Reduces equipment cost by delivering data and power over existing network cables Fanless design for silent operation 16Gbps switching capacity Sturdy rack mountable metal housing Lifetime Warranty* TRENDnet's 8-Port Gigabit Full Power PoE+ Switch, model TPE-TG80F, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This full power PoE switch features eight Gigabit PoE+ ports, supplying up to 30W of power per port for devices such as high-power wireless access points, IP cameras, and VoIP phone systems. The full power PoE switch supports both PoE and PoE+ devices with a 240W total PoE power budget. This unmanaged, rack mountable switch features a fanless design that eliminates operating noise and lowers energy consumption. Full Power PoE A 240W PoE power budget on this full power PoE switch supplies up to eight Power over Ethernet devices. Gigabit Ports Eight gigabit ports provides a 16Gbps switching capacity to support edge network installations. Fanless Fanless design lowers energy consumption and eliminates operating noise. PoE+ Full power PoE switch supplies up to 30W of PoE+ power per port with a total power budget of 240W Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Housing Design Sturdy rack mountable metal housing with included mounting kit Fanless Fanless design lowers energy consumption and eliminates operating noise LED Indicators LED indicators convey port status
Product kirjeldus: DIGITUS patch kaabel - 25 cm - kollane Type: Patch kaabel - CAT 5e tehnoloogia: Unshielded twisted pair (UTP) pikkus: 25 cm ühenduspesa: RJ-45 - male ühenduspesa (Second End): RJ-45 - male värv: kollane Image värv Disclaimer: The displayed product image may be a different colour
Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
TwistPort Adaptor for ePMPIntegrates ePMP connectorized radios into TwistPort eco-system. What is TwistPort AdaptorTwistPort Adaptor converts 3rd party radio coaxial interface into RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and requires no tools. Making 3rd party radios compatible with TwistPort enables using the radio with any TwistPort antenna ever made with superior performance, noise immunity and network scalability. Designed For ePMPTwistPort Adaptor for ePMP is compatible with Cambium Networks ePMP 1000 AP/CSM, ePMP Force 300 CSM and ePMP 3000L AP. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency and great VSWR.
Teltonika FMC001LTE/GNSS/BLE plug and play OBD trackerTeltonika FMC001 represents next step in communication technology – this is the first Plug and Track LTE OBD device with GNSS and Bluetooth connectivity. Possibility to read OBD II parameters effortless installation and detailed accelerometer data provides a compelling solution. This is perfect tracker for a wide range of applications – fleet management of light commercial vehicles car rental & leasing driver log-book insurance telematics (UBI) and so on. Device supports various Bluetooth Low Energy sensors beacons firmware and configuration update via Bluetooth.
ePMP MP 3000 MicroPOP Access PointThe ePMP MP 3000 is Cambium Networks' MicroPOP solution for WISP's and Enterprise network operators. The MicroPOP MP3000, part of the ePMP portfolio, solves the need for injecting additional capacity where it is needed most as well as extending network coverage in a cost-effective, light-weight manner. For example, a WISP can expand coverage to a new sub-division or area of a village that wasn't previously reachable by the core ePMP network. Additionally, a WISP or enterprise operator may need to inject additional capacity to a small campus or enclave of buildings. The MP 3000 along with ePMP Subscriber Modules can also serve as a distribution network for wi-fi access points.The MicroPOP MP 3000 is based on 802.11ac Wave 2 technology and can interoperate with any combination of up to 64 of the ePMP Force 300 series of subscriber modules (including Force 300-13, -13L, -16, -19, -19R and -25) as well as the Force 180/190/200 with backwards compatibility. Capacities of up to 600 Mbps are achievable with a range typically of one mile or 1.5 kilometers. The MP 3000 features an integrated omni antenna in a ruggedized IP67 enclosure.MicroPOP Applications: Extend Coverage Areas: deploy the MP 3000 in places unreachable by the main tower or to add adjacent coverage for new subscribers with lower overall density Inject New Capacity: deploy the MP 3000 to a set of customers demanding especially high capacity services Backhaul for Outdoor Wi-Fi Access Points: deploy the MP 3000 and ePMP Subscriber modules to create a hub-and-spoke backhaul for multiple wi-fi access points. Key Specifications: 2X2 MIMO support with peak throughput of 600 Mbps 256QAM-5/6, 80 MHz support Supports a wide frequency range: 4910 to 5950 MHz Supports up to 64 subscriber modules Integrated 9 dBi Dual-Polarity Omni-directional antenna Cloud or on-premises network management with cnMaestro NOTE: the MP 3000 does not support GPS synchronization and does not have an integrated real-time spectrum analyzer.
A heavy-duty 2.4GHz access point with extra miniPCI slot three SIM slots GNSS support (GPS GLONASS BeiDou Galileo) and LTE modem for International bands 1 2 3 7 8 20 38 and 40 The LtAP LTE kit is a compact weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity.Connect to the LtAP’s built-in high power 2.4 GHz 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP LTE kit also has one Gigabit Ethernet LAN port for wired devices. The RS232 serial port gives you console access for debugging.• 2.4 GHz AP in a rugged case• LTE installed in miniPCIe slot• Second miniPCIe slot for expansions• Three Mini SIM slots• Gigabit Ethernet port• Built-in GPS• Many powering options (DC jack POE-in automotive)• Serial port and full size USB for other devices• Perfect for cars or outdoor mobile applications The unit comes with two miniPCIe slots (one already populated with LTE modem) offering many expansion options. For example you can install second LTE modem for redundancy or 5 GHz interface to have dual concurrent 2.4 GHz / 5G hz AP + LTE. Unit is powered by Dual-Core 880 MHz CPU and 128 MB RAM to deal with heavy loads.LtAP has a special enclosure with a wall mounting kit three miniSIM slots to alternate between cellular providers and integrated GNSS support (GPS GLONASS BeiDou Galileo) making this a perfect device for use in moving vehicles like cars buses or trains. External GPS antenna is available for ordering separately (not included product code ACGPSA).The LTE card is connected to two internal antennas with u.FL connectors so if you want you can unplug the connectors and add your own external LTE antenna for better coverage. The unit has several powering options: 12-30 V PoE-in by Ethernet port DC jack and automotive connector.Use the built in GPS module to track the location of your vehicle in real time we have even provided a simple tracking application example in the RouterOS documentation to help you start development of your platform. Three models are available: • LtAP LTE kit (RBLtAP-2HnD&R11e-LTE) with R11e-LTE modem for International bands 1 2 3 7 8 20 38 and 40.• LtAP 4G kit (RBLtAP-2HnD&R11e-4G) with R11e-4G modem for International / USA bands 3 7 20 31 41n 42 and 43.• LtAP (RBLtAP-2HnD) without LTE card. Included parts
Teltonika MSP500Special GNSS/GSM/Bluetooth tracker with speed limiting functionalityMSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity internal GNSS/GSM antennas RS232 interface and internal Ni-Mh battery. Device was designed for speed limiting control.Speed limitingMoreover device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching or accelerator pedal control using additional electronic throttle controller.
