Planet IPOE-162 üheportiline, keskmise ulatusega tööstuslik IEEE 802.3at Power over Ethernet Plus injektor pakub kuni 30 vati väljundvõimsust Ethernet-kaablite kaudu. See on spetsiaalselt loodud suurema võimsusega võrguseadmete, näiteks PTZ (Pan, Tilt & Zoom) võrgukaamerate, PTZ kiirkuppelkaamerate, värviliste puutetundlike IP-telefonide (VoIP), mitmekanaliliste (11a/b/g/n) traadita LAN-i pääsupunktide ja muude võrguseadmete, mis vajavad stabiilseks tööks suuremat võimsust, kasvava nõudluse rahuldamiseks. Kiire ja lihtne suure võimsusega PoE-võrgu kasutuselevõttIPOE-162 võib anda 30-vattist 56 V alalisvoolu toite üle Cat.5/5e/6 Ethernet-kaablite, mis võimaldab andmete ja toite samaaegselt edastada kaabli kaudu Injektori (IPOE-162) ja PoE PD (toidetava seadme) või PoE Splitteri (IPOE-162S/POE-162S) vahel. Maksimaalne vahemaa Injectori ja Splitteri vahel on 100 meetrit. IPOE-162 ühildub ka IEEE 802.3af PoE PD või PoE Splitteriga ja pakub maksimaalselt kuni 15,4 vati väljundvõimsust. Tööstuslike IEEE 802.3at Power over Ethernet Plus seadmete paigaldamisel peab süsteemiadministraator kasutama ainult ühte RJ45 Ethernet-kaablit, et edastada nii toide kui ka andmed igasse seadmesse. See muudaks võrgu kasutuselevõtu lihtsamaks ja usaldusväärsemaks. Mugav ja usaldusväärne toitesüsteem Et hõlbustada 802.3at PoE kasutamist transpordi- ja tööstustasemel rakenduste puhul tavaliselt kasutatava 12~48 V alalisvoolu sisendiga, võtab IPOE-162 kasutusele 12~48 V alalisvoolu 56 V võimsuse suurendamise tehnoloogia, et lahendada toiteallika probleem, kuid ei vaja spetsiaalseid toiteallikaid. Selle laiaulatuslik pingedisain sobib ülemaailmseks kasutatavuseks koos suure kasutatavusega rakendustega, mis nõuavad kahte või varutoite sisendit.Stabiilne tööjõudlus rasketes tingimustesTänapäeval laieneb PoE nõudlus kaubanduslikest rakendustest paljudele kriitilistele võrkudele rasketes tingimustes. IPOE-162 on üks ideaalsetest lahendustest, mis tagab kõrge immuunsuse elektromagnetiliste häirete ja tugevate elektriliste ülepingete vastu, mis on tüüpilised tehases või kõnniteeäärsetes liiklusjuhtimiskappides esinevates keskkondades. IPOE-162 töötab stabiilselt temperatuurivahemikus -40 kuni 75 kraadi C, mis võimaldab kasutajatel mugavalt rakendada seadet peaaegu igas võrgu asukohas. IPOE-162 on varustatud ka kompaktse IP30 standardile vastava metallkorpusega, mis võimaldab kas DIN-riba või seinale paigaldamist, et kasutada tõhusalt kapi ruumi.
MS106LP 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports Two Cables in One: With four PoE+ ports, transfers data and power on one single cable High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode Isolation Mode: One click to divide traffic for specific ports for stability and security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation and long network life Plug and Play: Simple to use and saves time and effort PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
• 28AWG • PIMF (Pairs In Metal Foil) • Shielded Connector • Gold Plated Connectors for high signal quality • Molded boot with Strain relief • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • RoHS compliantLow Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173 • Bulk pack without zipper bag per piece • Quicker and easier to install • Selling Unit: 34pcs/set
The Ethernet cable USB-A 3.2 Gen1 to RJ-45 from goobay is a technology upgrade for maximum convenience. The innovative adapter cable 74163 is the compact Ethernet solution for all USB-A devices without their own RJ-45 port. The smart chip built into the USB connector replaces the previously required, cumbersome RJ-45 to USB-A adapter. Ethernet is therefore immediately available without any additional drivers. The LAN cable enables a stable, wired Internet connection to USB-A devices without their own network cable connection. With Cat.6, the cable achieves a transfer rate of up to 1 Gbit/s and is effectively protected against interference thanks to foil shielding (FTP). The braided, hard-wearing textile jacket of the USB cable is made of cotton, has a pleasant feel and is gentle on sensitive surfaces. The high-quality, robust aluminum plugs with kink protection ensure longevity. The USB-A port is compatible with notebooks and tablets from popular manufacturers such as Lenovo, HP or Dell as well as with Windows, macOS and Android and is backwards compatible with USB 2.0. type LAN adapter color white EAN 4040849741630 Manufacturer No. 74163 Made in Taiwan Application example Connects router or network switch to USB-C port of laptop network area connection of 1x USB-A (male) Cat.6 connector Protocol USB 3.2 Gen 1 (5 Gbit/s) taps 2 Category Cable Cat.6 FTP shielding Properties external, sleeved Feature Braided, durable textile jacket made of cotton, high-quality, robust metal plugs with kink protection, nickel-plated contacts Further information Max. transfer rate 1 Gbit/s, cable sheath diameter approx. 6mm, shielding foil (aluminum) Note The Internet cable is not suitable as a rollover cable for game consoles cable length 10 meters
The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. They will guarantee the installed cabling system is compliant with the ISO and EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking.
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. They will guarantee the installed cabling system is compliant with the ISO and EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking.
This specific patch panel is designed for use in the main and secondary distribution points of fast telecommunications systems. It is a passive component of structured cabling used for terminating and organizing twisted-pair cables within 19" rack cabinets. The patch panel is equipped with 48 unshielded RJ-45 ports of category 6.
RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, roheline vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s
Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
• 4 x 2 AWG 28/7 • 250MHz performance Bandwidth • Suitable for PoE, PoE+ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173 • Bulk pack without zipper bag per piece • Quicker and easier to install • Selling Unit: 50pcs/set
The Ubiquiti rack ear kit provides a reliable solution for mounting equipment in a standard 19-inch rack. Constructed from durable galvanized steel, it ensures long-lasting support and stability for your devices. The kit includes essential components such as #10-32 mounting screws and 2 plastic inserts, making installation straightforward and efficient.With a height suitable for fitting into a 1U space, this rack mounting solution is compatible with a wide range of equipment. Its robust design and quality materials contribute to a secure and organized setup, making it an ideal choice for both personal and professional use.
Sunnylife set of 4 CPL ND 4/8 UV filters for DJI Mini 2 (MM-FI9257)Create even more phenomenal shots with Sunnylife brand filters. You'll find four filters in the set, such as CPL, ND4, ND8 and UV, which are perfect for a variety of scenarios and will allow you to take shots with full color and polarized light. The kit is compatible with the DJ Mini 2 and Mini 2 SE cameras. Hassle-free installationThe filters are designed for quick and hassle-free installation. Each is adjustable, allowing you to achieve the desired polarization angle. You also don't have to worry about damaging your equipment. Exceptional protectionThe rugged design guarantees safe and comfortable operation in almost any conditions. The filters are characterized by resistance to scratches, oil, or water. Additional protection is provided to them by a special case. Light weight and professional glassHigh-quality optical glass was used for the filters, which is characterized by high transmittance, so the quality of your photos will be even better. Vibrant, realistic colors - this is what you will gain with the Sunnylife set! The filters are also characterized by light weight, so you don't have to worry about the load on your drone. CPL filterThe CPL filter will be perfect if you want effective color concentration and elimination of harmful non-metallic reflected light. The product allows you to shoot through glass and water and will help you capture stunning shots of, for example, blue skies and white clouds. Now the photos you take will be even more expressive. ND filters 4/8The included ND filters adjust the amount of light coming through the lens and make it easier to choose the right exposure. In addition, they improve the color saturation of your photos, making the image more vivid. They also make it possible to take original shots with special effects. They are perfect for recording on sunny days, making it easier to get the right blur. UV filterAre you concerned about increasing light transmission? Try a UV filter! It will further ensure that your equipment is properly protected and is great for shooting open spaces such as seas or vast fields. ManufacturerSunnylifeModelMM-FI9257CompatibilityDJI Mini 2 / Mini 2 SETypes of filtersCPL, ND4, ND8, UV
Puluz photo studio background supportYou will use the Puluz branded stand to photograph products for marketing purposes, take portraits, etc. The stand is durable, you will hang on it a backdrop made of canvas, muslin, cotton, paper or PVC paper.Sturdy and easy to install constructionThe PU3054B is made of metal, making it durable and rust-resistant. Easy assembly and disassembly makes this product ideal for anyone. The adjustable feature allows you to set the height according to your needs, and the tripod base provides stability. Packing list:Backdrop support standCrossbarBackdrop clips x2BrandPuluzModelPU3054BDimensions of the backdrop support stand67 x 65 cmMaximum height of the backdrop support stand65 cmMinimum height of the backdrop support stand37 cmMaterialmetalColorblack
PGYTECH ND-PL Filters for DJI Mavic Pro (P-43A-034)Introducing the PGYTECH ND-PL filter set for the DJI Mavic Pro, a perfect choice for drone photography and videography enthusiasts. These innovative filters combine lightweight construction with durability, ensuring unparalleled image quality without impacting the drone's performance. Perfectly tailored to meet the needs of both professionals and amateurs, PGYTECH filters allow you to capture clear images in bright environments, providing exceptional control over light and colors.Multi-Layer ProtectionEach PGYTECH ND-PL filter is equipped with a double-sided, multi-layer coating that is resistant to water, oil, and scratches. This ensures that the filter maintains its clarity and effectiveness even in challenging conditions while providing protection for your lens.Professional Optical GlassPGYTECH filters are crafted from Japanese professional optical glass from AGC, which undergoes multiple grinding and polishing processes. This guarantees a clear and sharp image, allowing you to capture details with high clarity.Lightweight and DurablePGYTECH ND-PL filters are incredibly lightweight, weighing only 8.5g each, yet exceptionally durable due to the use of aluminum and optical glass. Their lightweight design does not affect the drone's calibration or performance, which is crucial for maintaining flight stability.Light and Color ControlThe set includes ND-PL filters 8, 16, 32, 64, allowing for a wider aperture, shallower depth of field, extended exposure time, and reduced reflections on metallic surfaces. This provides excellent control over light and colors in all conditions.Package ContentsND-PL Filters Brand PGYTECH Compatibility DJI Mavic Pro Material Aluminum, optical glass Weight 8.5g x 4 + packaging
Das graue Patchkabel mit 5 Metern Länge von Sharkoon eignet sich zum Verbinden von Computern mit einem Hub bzw. Switch innerhalb eines 10/100/1000-MBit/s-Ethernet-Netzwerkes (speziell geeignet für Gigabit-Ethernet über Kupfer), oder zum Anschluss eines DSL-Modems an den Computer. Das Kabel hat eine Cat.6 SFTP-Abschirmung und RJ-45-Stecker.
The Killer™ Wi-Fi 7 BE1750x offers outstanding wireless connectivity for demanding users. With the latest Wi-Fi 7 technology, this adapter delivers ultra-fast data transfer rates and improved performance for a smooth online experience. Whether for gaming, streaming, or productivity applications, the Killer™ Wi-Fi 7 BE1750x lets you optimize your connection and minimize latency. Thanks to its advanced technology, this adapter is ideal for gaming enthusiasts and demanding users who value a reliable and high-performance wireless network connection.
The Ubiquiti wireless router stand is designed to enhance the placement of mobile routers on a tabletop, ensuring optimal connectivity and access. Constructed from durable aluminum, this router stand provides sturdy support for your networking equipment. Its efficient design saves space and allows for improved airflow, contributing to the longevity and performance of your router.
The Ubiquiti Rack Mounting Kit offers a streamlined solution for securely installing equipment in a robust rack environment. Crafted from durable thermoplastic (PA66), this kit is designed for easy handling and long-lasting performance. With a precision build that accommodates up to a 2.2 mm rack rail thickness, it ensures a snug fit for various equipment configurations. The package includes 2 x #10-32 screws to facilitate a swift installation process.This rack mounting kit features user-friendly qualities, including easy-to-remove components and snap-in installation, making it ideal for efficient setups. Its textured finish enhances aesthetic appeal and contributes to a secure grip, minimizing the risk of slippage. Whether for personal or professional use, this mounting kit addresses the needs of those seeking reliability and ease in their rack installations.
