"26-Port Cloud Managed Desktop Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design
Industrial-grade Ethernet cable that protects your network from elemental and electrostatic damage.The UISP-Cable-Carrier is a Category 5e cable that delivers multilayered elemental protection with a primary braid shield and a weatherproof jacket that prevents damage from rain snow and other harsh climatic conditions. The cable is also equipped with a drain wire and internal foil shielding to protect it from electrostatic discharge (ESD) and its anti-crosstalk divider preserves signal integrity allowing the cable to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
Die NETGEAR Gigabit Unmanaged Switch-Serie unterstützt Unternehmen dabei, das Netzwerk kostengünstig auf Gigabit-Geschwindigkeiten und höhere Portzahlen auszuweiten. Der GS524 ergänzt die Serie und bietet 24 Gigabit Ports. Der GS524 ist energieeffizient, auf lange Lebensdauer ausgelegt und wird intensiv getestet, um die Zuverlässigkeit zu bieten, die das Unternehmen benötigt. Priorisierung des 802.1p-Datenverkehrs und Jumbo Frame Support gestatten die nahtlose Integration in komplexere Netzwerke.
Patchcord UTP cable CAT6, 305mUTP CAT6 cable by Qoltec with a length of 305 m designed for indoor installations especially in data communication networks, computer networks, power transmission, data transmission and monitoring systems. The cable can also be used for transmission of digital HDTV.
16 PoE+ ports with 115W power budget. Unmanaged 300-Series PoE Switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable PLUG-AND-PLAY: Simple set up with no software to install or configuration needed and zero maintenance FULL PERFORMANCE: Non-blocking switching architecture for maximum throughput at wire speed POWER-OVER-ETHERNET: 16 PoE+ ports with 115W total power budget to power wireless AP, IP Cameras, IP Phones and much more NETGEAR FlexPoE Upgradable to 183W PoE+ Budget (w/separately purchased power supply module) PoE POWER AUTO-BALANCE AND ALLOCATION NETGEAR's unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs. SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments ENERGY EFFICIENT: Designed to optimize power usage lowering its cost to operate. Metal Case Durable and Rugged VERSATILE MOUNTING OPTIONS: Supports desktop and wall placement. Includes wall mount kit in the box STANDARDS-BASED DESIGN Ensure interoperability with any standards-based PDs
The Ubiquiti UniFi Device Bridge Pro is designed to provide robust wireless connectivity in various environments. With an antenna gain level of 19 dBi and support for advanced wireless protocols like IEEE 802.11a/n/ac, this device ensures strong signal transmission over long distances. It has a range of up to 5 km in open space, suitable for applications where network extension is essential.This device is built to withstand extreme conditions, operating in temperatures from -40°C to 60°C and humidity levels between 5% to 95%. The weatherproof, UV-resistant casing protects the internal components, making it a reliable option for outdoor installations. Equipped with Power over Ethernet (PoE) capabilities and efficient performance reaching up to 867 Mbps on the 5 GHz band, the Ubiquiti UniFi Device Bridge Pro is an effective solution for establishing a resilient wireless bridge.
Tööstuslik PoE+ lüliti Teltonika TSW040 on haldamata 8-portiline PoE+ lüliti mis on loodud ühendama kiire Etherneti ühenduvuse usaldusväärse toiteallikaga. Iga RJ45-port toetab 10/100 Mbps andmeedastuskiirust ja suudab pakkuda kuni 30 W võimsust Etherneti kaudu (PoE) mis muudab selle sobivaks selliste seadmete toiteks nagu IP-kaamerad traadita juurdepääsupunktid ja VoIP-telefonid ilma täiendavate toiteadapteriteta. Lüliti toetab täielikult IEEE 802.3af ja 802.3at standardeid tagades ühilduvuse paljude seadmetega. Kõik pordid on varustatud automaatse MDI/MDIX funktsiooniga mis tuvastab ja parandab automaatselt kaabliühendusi kõrvaldades vajaduse ristkaablite järele. TSW040 suudab oma 240 W PoE võimsusega varustada toitega mitut seadet korraga. Kompaktne ja vastupidav disain teeb selle ideaalseks tööstuslikeks ja kaubanduslikeks installatsioonideks kus usaldusväärne ühenduvus ja toiteallikas on pideva töö jaoks hädavajalikud. Toite- ja paigaldusvõimalused TSW040 lüliti toidetakse 2-pinise tööstusliku alalisvoolu pistikuga mis toetab laia pingevahemikku 7 kuni 57 V alalisvoolu. See lai sisendvahemik tagab ühilduvuse mitmesuguste tööstuslike ja kaubanduslike toitesüsteemidega. Seadmel on ka integreeritud DIN-siini paigaldusklambrid mis tagavad turvalise ja mugava paigaldamise juhtimiskappidesse serverirestidesse või elektripaigaldistesse. See disain on eriti kasulik tööstuslikes rakendustes kus stabiilne paigaldus ja ruumi optimeerimine on kriitilise tähtsusega. Paindliku toite sisendi ja usaldusväärse paigalduse kombinatsioon tagab et lüliti töötab katkematult isegi muutuvate toiteolude tingimustes. Lisaks on lüliti konstrueeritud taluma tüüpilisi elektrilisi häireid pakkudes pikaajalist stabiilsust ja madalaid hooldusnõudeid. Selle läbimõeldud konstruktsioon tagab lihtsa kasutuselevõtu säilitades samal ajal stabiilse jõudluse nõudlikes võrgukonfiguratsioonides mis teeb sellest usaldusväärse tugisamba Etherneti-toitel töötavatele seadmetele tööstusvõrkudes. Kestvus ja jõudlus TSW040 on loodud tagama pideva ja usaldusväärse jõudluse tööstuslikes keskkondades. See töötab laias temperatuurivahemikus -40 °C kuni +75 °C mistõttu sobib kasutamiseks kohtades kus temperatuur kõigub märkimisväärselt. Lüliti on IP30-klassiga kaitstud mis kaitseb selle sisekomponente tööstus- ja abiruumides levinud tolmu ja prahi eest. Selle kõrge jõudlusega arhitektuur toetab kuni 9216-baidiseid jumbo-raame võimaldades suuremahuliste andmepakettide tõhusat edastamist video- telemeetria- ja automatiseerimisrakendustes. 128 KB pakettpuhvri ja 20 Gbps kogumahuga mitteblokeeriva ribalaiusega suudab TSW040 töödelda suuri võrguliikluse mahtusid minimaalse viivitusega. Need omadused koos kompaktsete mõõtmetega tugeva konstruktsiooni ja energiatõhusa töötamisega muudavad selle ideaalseks tööstusautomaatika nutikate hoonete ja kommertsvõrkude jaoks tagades pikaajalise vastupidavuse ja katkematu ühenduvuse mitmele ühendatud seadmele.
SAVIO AK-69 USB-C 3.1 Gen 1- SATA 2,5" Adapter USB-C adapter AK-69, is a cable characterized by high quality and reliability. You can transfer data, charge devices, and connect accessories. Thanks to the Plug&Play function, the electronic accessory does not require installing additional drivers. Moreover, it is compatible with all Windows, macOS, and Linux operating systems. Practicality The AK-69 adapter from Savio, thanks to its USB-C end, is used to transfer data from one device or drive to another. It is especially useful in a situation where you have an older type of SSD (SATA) drive and you want to plug it into a new laptop, to rip the files you need. AK-69 can be used as an adapter, allowing you to create a 2.5" drive into an external data storage device. Fast data transmission The AK-69 offers high-speed data transmission of up to 5 Gbps over the SATA connector. This is a serial interface used in computers for communication between the processor and storage and optical drives. The speed offered is perfect for fast, efficient, and hassle-free file exchange. Practicality and convenience Savio's adapter features convenience in use, thanks to its 25 cm long cable. It is long enough to provide flexibility of use but short enough to be easy to carry and not get tangled. Supporting 2.5" HDDs and SSDs with the USB-C adapter involves connecting the drives to a computer or other device with a USB-C port. This is done without having to place them internally in the enclosure. Technical specifications: Data transmission: SATA III up to 5 Gbps and SATA II up to 3 Gbps Hard drive support: up to 10 TB Supported drives: 2.5" Cable length: 25 cm. Plug and Play: Yes, no additional drivers are required Dimensions: 45 × 42 × 11.5 mm Weight: 19 g
The AVM Fritz!Box Cable 6670 uses Wi-Fi 7 to ensure high Wi-Fi speeds and offers strong connections for many devices. It is therefore ideal for real-time applications such as gaming, virtual reality or video conferences. Wi-Fi 7 is perfectly integrated into the FRITZ! environment - all Wi-Fi devices work optimally together in the Wi-Fi mesh and offer you top speed. The Wi-Fi 7 standard adapts to your current environment and also works perfectly with all older Wi-Fi devices. On the cable connection, the FRITZ!Box 6670 Cable with DOCSIS 3.1 offers breathtaking speeds of up to 6 GBit/s. A 2.5 Gigabit LAN and four 1 Gigabit LAN ports offer a wide range of connection options for your devices. Whether streaming or gaming, downloads or video conferences: benefit from fast response times and the full bandwidth of your connection. The FRITZ!Box 6670 Cable is the perfect hub for your intelligent home with practical automation. Control your smart home devices with a schedule or with scenarios and routines. The FRITZ!Box supports the FRITZ! smart home products and also integrates smart home devices from other manufacturers via Zigbee, such as LED lamps. type router EAN 4023125030475 Manufacturer No. 20003047 desktop design Application area: home networks, business Network connections RJ-45 5x (of which: 4x 10/100/1000, 1x 100/1000/2500) Features WPS, Mesh WLAN standards Wi-Fi 3 (802.11a), Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6E, Wi-Fi 7 - (2.4 GHz, 5 GHz) Modem Type Cable Power supply power supply connection, power consumption operation: 11 W Feature 1x cable with DOCSIS 3.1 | Integrated DECT base for up to 6 cordless phones and for smart home devices (DECT ULE) | Integrated smart home gateway for integrating LED lamps and other devices via Zigbee 3.0 | Firewall/NAT, DHCP server, DynDNS client, UPnP | Full band capture tuner | Stateful packet inspection firewall with port forwarding | Secure remote access, LAN-LAN coupling and dial-in to company network with VPN (WireGuard and IPSec) | Supports up to 50 smart home devices (DECT ULE) More information Intelligent Smart Home for DECT and Zigbee devices Accessories available Power supply, RJ-45 Ethernet cable (1.5m), coaxial cable (1.5m), installation manual Dimensions Width: 254 mm x Height: 63 mm x Depth/Length: 191 mm
Kogege järgmise põlvkonna ühenduvuse võimsust TRB501 tööstusliku 5G-väravaga. See on loodud nõudlikesse keskkondadesse ja pakub ülikiiret, madala latentsiga 5G-ühendust uue automatiseerimise ja tõhususe ajastu jaoks. See kompaktne seade on loodud andmete kiiremaks edastamiseks 2,5 Gbps Etherneti ja 5G kandjate koondamise (3GPP Release 16) abil ning sobib ideaalselt POS-süsteemide, turvasüsteemide ja IIoT-rakenduste jaoks.JÄRGMISE PÕLVKONNA 5GVäiksem latentsus, parem spektri kasutamine ja 5G kandjate koondamineKIIRESTI ETHERNETÜlikiire traadiga andmeside kiirus kuni 2,5 GbpsKOMPAKTNE5G piiratud ruumides ilma jõudluse langusetaIIoT PROTOKOLLIVALMISModbus, DNP3 ja DLMS SCADA, nutivõrgu ja telemeetria jaoks