Võrguseadmed

Patchcord cat.6 UTP 2M 10-pack fluke passed white Conductor thickness: 26AWG (7 x 0.16mm) Outer diameter: 5.4mm +/- 0.2mm Material: conductors-CCA, sheath-PVC Maximum operating frequency: up to 250 MHz Maximum data transmission speed: up to 10 Gb/s Compatible with ANSI/TIA/EIA-568-B standards Product complies with the requirements of IS0/IEC 11801 class D

Input voltage100 – 240 VACInput frequency50 / 60 HzInput current3.9 AInput connectorEU (Type F)Output voltage54 VDCOutput current4.62 AOutput connector2-pin, with cord end terminalsWeight1080 gADDITIONALInput voltage range90 – 264 VACInput frequency range47 – 63 HzMaximum input inrush current60 AOutput voltage maximum deviation51.3 – 56.7 VDCShort circuit protection✓HIPOT (dielectric withstand test)Primary to Secondary: 1500 VAC

PLANET Industrial 1-Port 802.3bt PoE++ Splitter

Mi Range Extender Pro Wi-Fi Signal Booster 300 Mbps Provides reliable and extremely fast network performance with powerful 802.11n Wi-Fi technology. Up to 24 devices To maintain the best performance, it is recommended to connect up to 24 devices. Easy setup Connecting to the router is very convenient thanks to the Mi Home app. This is even easier with Mi routers. Flexible deployment Once connected to your router, you can simply disconnect and reconnect the amplifier in the location that gives you the best signal quality and coverage. Eliminate the blind spot Wirelessly connects to your router to boost and extend your signal to hard-to-reach areas. 2 external antennas 2 external antennas with advanced connection technology to achieve reliable Wi-Fi coverage throughout your home or office.

HPE Aruba Instant On DA Copper Cable 10Gbit/s SFP+ to SFP+ 3m Revision A

Patchcord cat.6 FTP 0.5M 10-pack fluke passed blue Cable type: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors-copper, CCA; sheath-PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E

Patchcord cat.6 FTP 1m black fluke passed 10 pieces Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors: Copper plated, CCA, Sheath: PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E

GEMBIRD UTP Cat6 Patch cord 1.5m yellow

LevelOne POW-2432. Total effekt: 75 W, Vekselstrømsindgangsspænding: 90 - 264 V, Vekselstrømsindgangsfrekvens: 47 - 63 Hz. Gennemsnitstid mellem fejl (MTBF): 486200 t, Sikkerhed: EN 55032 (CISPR32) Class A EN 61000-3-2,-3,EACTPTC020,CNS13438 Class A EN 61000-4-2,3,4,5,6,8,11..., Oprindelsesland: Kina. Produktfarve: Blå, Sølv. Bredde: 32 mm, Dybde: 102 mm, Højde: 125,2 mm. Pakkebredde: 53 mm, Pakkedybde: 132 mm, Pakkehøjde: 147 mm

The LANCOM XS-5116QF is designed for network efficiency with its features. It supports 4,000 active VLANs and 1,024 tagged VLANs, optimizing data flow within operations. The device offers versatile interfaces including 12 1 Gigabit / 10 Gigabit SFP+ ports and additional 40 Gigabit QSFP+ uplink/stacking options, ensuring connectivity across various network demands. Its management protocols, such as SNMP and RMON, provide effective remote management capabilities for easy monitoring and control. Built with front to back airflow, this switch ensures cooling even in high-temperature environments, suitable for a wide range of installations. Operating within a temperature range from 0°C to 40°C and humidity levels of 10-90% non-condensing, the LANCOM XS-5116QF is engineered for durability. The inclusion of a rack mounting kit and its hot-swappable fans allow for easy integration into existing setups without downtime. Networking features like IGMP snooping and multicast storm control ensure that data is managed efficiently, providing a stable network experience. This switch prioritizes performance, scalability, and security, making it a solid choice for networking needs.

Discover the DIGITUS industrial switch, a high-performance solution designed to meet the demands of modern industrial environments. This switch offers a robust 14 Gbps bandwidth and a 10.5 Mpps packet forwarding rate, ensuring efficient data handling and connectivity for all your devices. Constructed with a durable aluminum housing and rated IP40, it stands up to the rigors of industrial use while providing reliable service with an impressive MTBF of 300,000 hours.Equipped with four 10/100/1000 (PoE) ports and one Gigabit SFP (uplink) port, it delivers flexible connectivity options and supports power over Ethernet, simplifying the network infrastructure. The switch also features comprehensive electrical protection, including 6 kV EFT and ESD protectors, to safeguard against unexpected surges and static discharge. With LED status indicators for easy monitoring and features like auto-uplink and flow control, managing your network has never been simpler or more efficient.

The LANCOM GS-3652X switch is designed to meet the demands of modern networks, offering a blend of performance, security, and manageability. With a total of 52 ports, including PoE+ and 2.5G PoE+ options, it provides flexible connectivity for a variety of devices. The switch's impressive throughput of 212 Gbps and switching capacity of 130 million packets per second ensure that data flows smoothly across the network, making it an ideal solution for environments requiring high-speed data transfer and reliable operation. Security is a top priority, with features like RADIUS and TACACS+ authentication, MD5 and SSL encryption, and advanced VLAN support ensuring a secure network environment. The LANCOM GS-3652X's rack-mountable design, complete with a mounting kit, allows for easy integration into any standard rack, making it a versatile choice for any business looking to enhance its network infrastructure.

• 8 Gigabit PoE ports and 2 Gigabit SFP ports • Port 1~2 10/100/1000Base-T RJ45(IEEE 802.3bt) PoE 90W • Port 3~8 support IEEE 802.3at Power over Ethernet Plus (PoE+) • Compatible with IEEE802.3af/at/bt • Support L2 management, such as QoS, VLAN, MSTP, Multi-brocast, ports management and PoE management • Supports ERPS for ring topology • 6KV surge protection, 8KV contact /15KV air ESD protection • Provides DIN-rail, wall or desktop mounting • 40°C to 75°C operating temperature range

The Switch is 8 ports 10/100/1000 Mbps + 2 ports 100/1000 Mbps SFP Slots Unmanaged Ethernet Switch. This switch is a design of high integration level, exquisite, portable, easy to operate, which is suitable for the small and medium office and home network. The switch provide you with a simple, economic, standard and high performance of network application plan, it is ideal choice to promote the department and working group performance. It provide simple and understood LED indicator light on the front panel, so that you can quickly judge the working state of the switch, and help to diagnose the network failure.

• Supports IEEE802.3x flow control, and backpressure • Supports store-and-forward technology for optimized data transmission • Automatic speed and half/full duplex detection/adjustment • Bandwidth: 20 Gbps • Packet forwarding size: 15 Mbps • Packet buffer: 4.1 Mbit • Size of the MAC address table: 4 K • Jumbo frame rate: 10240 bytes • ESD protection: 6 kV • EFT protection: 6 kV • Metal housing, IP40 • 4 kV lightning protection and surge protection • Suitable for mounting on DIN rail (top-hat rail) • Redundant power supply with reverse polarity protection function • Power supply: 12 to 48 V (DC) • Power consumption:

Ubiquiti Väliskaabel, 2 m, must

PULSAR SF116 võrgukommutaator on hallatav Fast Ethernet (10/100) seade, mis võimaldab tõhusat võrgu haldamist ja voolu jaotamist üle Etherneti. See kompaktne 1U lüliti sobib ideaalselt ettevõtetele ja võrguadministraatoritele, kes soovivad optimeerida oma võrguinfrastruktuuri minimaalsete häiretega. Tänu Power over Ethernet (PoE) võimekusele võimaldab see edastada nii andmeid kui ka toitu ühe võrgukaabli kaudu PoE-ühilduvatele seadmetele, nagu IP-kaamerad, VoIP-telefonid ja traadita juurdepääsupunktid, lihtsustades oluliselt võrgu paigaldamist, vähendades vajadust täiendavate toiteallikate järele. PULSAR SF116 on elegantses mustas korpuses, mis sulandub sujuvalt olemasolevate IT-seadmetega. Tänu ruumikindlale 1U disainile sobib see ideaalselt riiulisse paigaldamiseks, mis säästab väärtuslikku ruumi võrgukappides. Tänu täiustatud haldusfunktsioonidele saavad kasutajad kontrollida võrguliiklust, suurendada turvalisust ja parandada jõudlust, pakkudes usaldusväärset ja skaleeritavat võrgukeskkonda. See kommutaator on suurepärane valik väikestele ja keskmise suurusega ettevõtetele, kes otsivad kuluefektiivset, kuid samas võimsat võrgu laiendamise ja haldamise lahendust.

Welcome to the forefront of networking: the future-proof CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit port we’ve seen so far. With 16x 100 Gigabit QSFP28 ports, 4x 25 Gigabit SFP28 ports, and an extra pair of 10 Gigabit Ethernet ports, this switch can bring a lot of value to complicated enterprise networks, data centers, multimedia studios, and other setups where you would typically use several devices. Now – a single CRS520 can do the trick! Avid CCR users might recognize the powerful quad-core ARM CPU running at 2 GHz, and ask – why would a switch need all that power? Two reasons: 1) CRS520 is more than a switch. You can run OSPF/BGP, out-of-band/management VPNs, ACLs, Jumbo frames and even L3HW Offloaded routing; 2) Future-proofing: as our friends at Marvell keep expanding the capabilities of their spectacular switch-chips, our in-house software team is busy exploring ways to add even more Hardware Offloaded features. You can expect software updates that will take the CRS520 to the next level! And all that without any paywalls or subscriptions. Two hot-swap power supplies and four hot-swap fans for cooling are included. This switch can also be powered by the PW48V-12V150W Hot Swap -48V DC telecom power supply, available separately.

A-Lan MKN-U6-1, RJ45

LANBERG Patchcord Cat.5e UTP 1.5m white 10-pack

DIGITUS CAT 7 S-FTP Roh-Installationskabel, PiMF Länge 1000 m, Trommel, AWG 23/1, 1200 MHz, LSZH-3, Simplex, Farbe Orange

LANBERG Patchcord Cat.5e UTP 2m white 10-pack

Specification: ICT category: 5e Shielding type: U/UTP (no shielding) Length: 2 m Conductor thickness: 26AWG (7 x 0.15mm) Outer diameter: 4.8mm +/- 0.2mm Material of construction: Conductors: CCA Sheath: PVC Colour: Red RAL3017 Maximum operating frequency: up to 100MHz Maximum data transmission speed: up to 1 Gbps Compatible with ANSI/TIA/EIA-568-B standards Product complies with the requirements of IS0/IEC 11801 class D

The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. They will guarantee the installed cabling system is compliant with the ISO and EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking.

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate

UTP LAN cable 1GB/S 305M CCA wire, orange Data transmission speed: 1Gb/s Conductor design: copper-plated (CCA) AWG 23 (4 x 2 x 0.57 mm) Conductor structure: single wire Length counter print for every meter of cable External PVC insulation: 5.6 mm HDPE insulation of the core: 0.95 mm Operation up to 250 MHz Packaging: carton Electrical parameters (20 degrees): Core resistance (max.): Rated voltage: Maximum current: 0.5 A Storage and transportation temperature: 0 - 60 degrees Operating temperature: -20 - 75 degrees Operating distance: 100 m PURPOSE: cable intended only for cutting into short lengths (up to 10 m). For use only in installations without Fluke certification (EN 50173).

LANBERG Patchcord Cat.6 FTP 0.25m red 10-pack

LANBERG Patchcord Cat.5e UTP 1.5m red 10-pack

UTP cat.6 network cable Vention IBEHD 0,5 m (grey)The cable will find its use at home, work, hotel, etc. It provides a fast and stable Internet connection of 1000 Mbps without interference, so you can freely play games without delays, watch movies or work. In addition, the use of copper and gold-plated connectors affects the efficiency of the product, and the PVC finish provides protection against wear, splashing and stretching.ManufacturerVentionModelIBEHDColorgreyLength0,5 m InterfaceRJ45 to RJ45Transmission speed1000 Mbps

UTP cat.6 network cable Vention IBEHF 1 m (grey)The cable will find its use at home, work, hotel, etc. It provides a fast and stable Internet connection of 1000 Mbps without interference, so you can freely play games without delays, watch movies or work. In addition, the use of copper and gold-plated connectors affects the efficiency of the product, and the PVC finish provides protection against wear, splashing and stretching.ManufacturerVentionModelIBEHFColorgreyLength1 m InterfaceRJ45 to RJ45Transmission speed1000 Mbps

Flat UTP Cat 7 Network Cable Vention ICABL 10mNow you can freely play games, download files, work, or watch movies. The Vention network cable provides a transfer speed of up to 10 Gbps, so you don't have to worry about delays or other signal problems. Copper contacts and aluminum foil shielding ensure fast and stable transmission, while the flat design and a thickness of just 2.5 mm make cable installation easy. You can easily route it under doors or along walls! The cable also stands out with its wide compatibility – it works perfectly with computers, laptops, routers, and more. BrandVentionModelICABLColorBlackInterfaceRJ45Transmission SpeedUp to 10 GbpsCable Length10m

LANBERG Patchcord Cat.6 UTP 0.25m green 10-pack

• 4 x 2 AWG 28/7 • 250MHz performance Bandwidth • Suitable for PoE, PoE+ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate and UL listed • Selling Unit: 10pcs/Pack

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate and UL listed • Selling Unit: 10pcs/Pack

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate and UL listed • Selling Unit: 10pcs/Pack

• 4 x 2 AWG 26/7 • 500MHz performance Bandwidth • Transmission: 10Gbit • Suitable for PoE, PoE+, PoE++ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • with 3P certificate

The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. They will guarantee the installed cabling system is compliant with the ISO and EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking.

The DIGITUS Category 6A Class EA patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk ("NEXT"). DIGITUS patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore, the boot is equipped with a latch protection that prevents the latching lever against breaking. You can easily identify the Category 6A, because of the transparent yellow colored connector.

• 4 x 2 AWG 28/7 • 250MHz performance Bandwidth • Suitable for PoE, PoE+ • Stranded bare copper conductor • Foil and braid shield Reduces EMI/RFI interference • PIMF (Pairs in metal Foil) • Molded boot with Strain relief • RoHS compliant • Low Smoke Zero Halogen (LSZH/LSOH) • Compliant with ISO/IEC 11801 and EN 50173