See Delocki adapter võimaldab muuta VGA-monitori liidese DVI 24+5-pordiks. Seega saab näiteks monitori ühendada DVI-liidese kaudu. Spetsifikatsioon 1 x DVI 24+5 Pin ema 1 x VGA 15-pin isa Süsteeminõuded - Üks vaba VGA port
See Delocki dokkimisjaam võimaldab USB-C™-liidese kaudu ühendada ühe 2,5″ või 3,5″ SATA HDD- või SSD-ketta. See lahendus ei nõua välist korpust, kuna ketta saab lihtsalt ühendada otse dokkimisjaama. Spetsifikatsioon Ühendused: USB Type-C™ (USB 3.1 Gen 2): 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2), USB Type-C™ emane 1 x SATA 6 Gb/s 22-pooluseline pesa 1 x alalisvoolu pesa Kiibistik: Asmedia ASM235CM Funktsiooniklahv: 1 x sisse/välja lüliti 2,5″ ja 3,5″ SATA HDD / SSD jaoks Sobib kõikidele SATA kõvakettadele kuni SATA 6 Gb/s kiirusega Andmeedastuskiirus kuni 6 Gb/s LED-indikaator toite ja juurdepääsu jaoks Mõõtmed (LxSxK): ca. 129 x 75 x 57 mm Plug & Play Toiteallika spetsifikatsioon Seina toiteallikas Sisend: V / 50 ~ 60 Hz / 0,8 A Väljund: 12 V / 2 A Maandus väljastpoolt, pluss seestpoolt Mõõdud: ø ca. 2,1 mm, seestpoolt: ø ca. 2,1 mm väljast: ø ca. 5,5 mm pikkus: ca. 10 mm Süsteeminõuded Linuxi tuum 4.9.4 või uuem versioon Mac OS 10.13.3 või uuem versioon Windows 7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Dokkimisjaam Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 80 cm Väline toiteallikas 12 V / 2 A Kasutusjuhend
RG-RAP6262(G) Wi-Fi 6 AX1800 Outdoor Omni-directional Access Point 'UFO' design, a perfect blend of Wi-Fi 6 technology and artwork IP68 protection, rock-solid in harsh environments Omni-directional coverage with long range Easily add extra outdoor Wi-Fi with Reyee Mesh Rack-separated mounting design, easily installation on high
This USB 2.0 to serial RS-422/485 converter by Delock offers an RS-422/485 connection for measuring devices, POS systems, printers, modems, IoT devices etc. The galvanic isolation prevents data transmission errors with uneven earthing potentials, ground loops or voltage spikes. The converter is suitable for DIN rail mounting. Galvanic isolation The galvanic isolation (3 KV) is done with optical isolators. Specification • Connector: Host: 1 x Mini USB 2.0 B female Device: 1 x RS-422/485 Terminal Block 5 pin • Data transfer rate up to 1 Mb/s • 1 x DIP switch: RS-422/485 set operating mode • LED indicators for status TX / RX • 3 kV optical isolation • ± 15 kV ESD protection for all signal pins • Supports: RS-485 Echo Mode • Power consumption: 54 mA / 270 mW • Power supply via USB (Bus-Powered) • Operating temperature: - 30° ~ 75° C • Storage temperature: - 40° ~ 85° C • Relative humidity: 5 ~ 95 % (not condensing) • Housing: plastic • Dimension (LxWxH): ca. 101 x 42 x 22 mm System requirements • Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-6410/10-64, Server 2012/2012R2/2016, Mac OS 10.5, Linux Kernel 2.6 • PC or notebook with one free USB port Package content • Converter • USB 2.0 cable, length: ca. 1 m • Mounting set for DIN rail • Driver CD • User manual
Delocki USB-laadimisfunktsiooniga pistikupesa pikenduskuubik sobib erinevate seadmete mugavaks ühendamiseks. Pistikupesa on integreeritud seinakinnitusega, nii et seda saab paigaldada ka seinale või laua alla. Teha 1-st 3 Kas köögis, elutoas või kontoris. Vabadest pistikupesadest on puudus. See mitmekordne pistikupesa teeb ühest vabast maandatud pistikupesast kolm. Kuubikujuline kuju pakub ka ruumi säästvat lahendust. USB-laadija kaasas Laadija on integreeritud nii, et lisapesad ei pea olema hõivatud laadijatega. Lisaks pistikupesadele on üks USB Type-C™ ja kaks USB Type-A laadimisporti. Spetsifikatsioon - Ühendused: Sisend: 1 x pistik CEE 7/7 Väljund: 3 x pistikupesa CEE 7/3 2 x USB Type-A pistikupesa 1 x USB Type-C™ pesa - Nimivool: 16,0 A / 250 V~ - Nimivõimsus: 3680,0 W - Seinale paigaldamise võimalus - LEDid oleku jälgimiseks - USB-laadija: Sisend: AC 250 V / 50 Hz / 0,5 A Väljund: max. 3,4 A kombineeritud Väljundvõimsus: max. 17,0 W kokku USB-A: 5,0 V / 2,4 A pordi kohta USB-C™: 5,0 V / 3,0 A Ülevoolukaitse, ülekuumenemiskaitse, lühisekaitse - Keskmine aktiivne kasutegur 87,64 % - Efektiivsus madalal koormusel (10 %) 82,52 % - Energiatarve koormuseta 0,088 W - Värv: valge - Kaabli pikkus: ca 1,5 m - Mõõtmed (LxSxK): ca. 62 x 62 x 65 mm Pakendi sisu - Pistikupesa kuubik - 2 kruvi - Kasutusjuhend
Description This antenna cable by Delock is suitable to supply an antenna signal in the interior of a device. Specification • Connectors: 1 x RP-SMA jack bulkhead > 1 x MHF® I plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 1.13 • Cable attenuation: 3.2 dB @ 2.4 GHz per meter • Cable diameter: ca. 1.13 mm • Smallest bending radius: 4.5 mm • Cable colour: grey • Cable length incl. connectors: ca. 35 cm System requirements • Device with one free RP-SMA or MHF® I port Package content • Cable • Nut and Locking Ring Package • Zip poly bag
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
