Features and Benefits IEEE 802.3af compliant, splits power and data from PoE equipment Supports output power up to 12.95 W at 24 VDC Short circuit protection for power output Auto disconnection if power input voltage is too high -40 to 75°C operating temperature range (T model) DIN-Rail mounting ability Introduction With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits power from PoEto Ethernet devices. In this case, both power and data can be transmitted up to 328 feet (100 m) from power source equipment (PSE). This product can operate from 0 to 60°C or -40 to 75°C for T model, and the rugged hardware design makes SPL-24 perfect for ensuring your PoE Ethernet equipment can meet demanding industrial applications.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Self-ventilated sheet steel housing, Front door with window made of safety glass, Lockable door, lock with latch, Door opening angle 180 degrees, Front profile rails fixed, Cable entry optionally from above or below (openings 120 mm x 35 mm), Paint finish: RAL 7035 (light grey), Delivery in transport packaging.
TI-IG60 (Version v1.0R)Hardened IP30 rated Gigabit PoE InjectorSupplies PoE (15 W), PoE + (30 W), high power PoE+ (36 W), or 60 Watt PoE powerNetwork a PoE device located up to 100 meters (328 ft.) awayExtreme -40 to 75 ºC (-40 to 167 ºF) operating temperature rangeDual redundant power inputs with overload current protectionIncludes DIN-rail and wall mountsPower supply sold separately (model TI-S12048)TRENDnet’s TI-IG60 is a reliable IP30 rated Industrial Gigabit PoE+ Injector with hardened components rated for extreme industrial environments. Connect the TI-IG60 to a non-PoE Gigabit switch and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. The TI-IG60 supplies power to a PoE (up to 15 W), PoE + (up to 30 W), high power PoE+ (36 W), or 60 Watt PoE device. Dual redundant power inputs (power supply sold separately: TI-S12048) with overload current protection support zero downtime applications. Both DIN-rail and wall mount hardware is included.Plug and PlayPlug and play PoE network devicesPoESupplies power to a PoE (up to 15 W), PoE + (up to 30 W), high power PoE+ (36 W), or 60 Watt PoE deviceGigabit Ports1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet portExtension DistanceExtends a PoE network connection up to 100 meters (328 ft.)DIP SwitchesDIP Switch 1: 2- pair PoE/PoE+ or 4-pair 60/72 Watt PoEDIP Switch 2: Mode A (endspan PD support) or Mode B (midspan PD support)DIP Switch 3: PoE+ (30 Watt) or high power PoE+ (36 Watt)DIP Switch 4: ReservedDIN-Rail/Wall MountsIP30 rated metal enclosure with included DIN-rail and wall mount hardwareRedundant PowerDual redundant power inputs with overload current protection (power supply sold separately: model TI-S12048)Extreme TemperaturesHardened converter is rated for an operating temperature range of -40 to 75 ºC (-40 to 167 ºF)Electro Magnetic ComplianceComplies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standardsCertificationsRated for information technology (ITE) equipment (EN55022/24) and industrial, scientifi
