See Delocki tööriistakomplekt sisaldab kõiki tööriistu võrgukaablite paigaldamiseks: kaabli eemaldaja, pressimistööriist, mulgustamistööriist ja võrgukaabli tester. Käepärases kotis on komplekt turvaline kaasaskandmiseks ja kiirelt kasutusvalmis. Spetsifikatsioon • Võrgukaabli tester RJ45 / RJ12 jaoks koos eemaldatava kaugjuhtimisseadmega • Võrgukaabli tester akupesaga 1 x 9 V aku jaoks (ei kuulu komplekti) • Lõikemehhanismiga stantsimistööriist • Kaabli eemaldaja keerdpaar- ja koaksiaalkaablite jaoks • Kaabli eemaldaja reguleeritav erinevate kaabli läbimõõtude jaoks • RJ45 pistikute pressimistööriist • Kott • Koti mõõdud (PxLxK): ca. 21,5 x 13,0 x 5,0 cm
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.5 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.50 mm (with tilt joint) ca. 199.20 mm (without tilt joint) • Diameter: ca. 19.70 mm (top) ca. 21.50 mm (max.) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
Seda Delocki pikenduskaablit saab kasutada 8-pini EPS-pistikutega emaplaadi toiteks. Spetsifikatsioon - Pistikud: 1 x 8-pini EPS-istmik > 1 x 8-pini EPS-liitmiku pesa - Pinge: 12 V - Kaabli gabariit: 20 AWG - Pikkus koos pistikutega: ca. 30 cm Süsteeminõuded - Vaba 8-pini EPS-liides Pakendi sisu - Toitejuhe
Seda Delocki USB 2.0 ja RS-232 kaablit saab kasutada CISCO ruuterite, kommutaatorite, pääsupunktide ja muude ühilduvate seadmete konsooli juhtimiseks arvuti või sülearvuti kaudu. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A isane 1 x jada RS-232 RJ45 pesa - Kiibistik: FTDI FT232RL - Ühildub USB 3.0, USB 2.0 ja USB 1.1 täiskiirusega 12 Mbit/s. - Andmeedastuskiirus kuni 230,4 Kbit/s - Kaabli pikkus koos pistikutega: ca. 1,8 m - Sobib erinevate CISCO seadmetega Süsteeminõuded - Linuxi tuum 2.6 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 2.0 ja 1 x jadaadapter - Draiveri CD - Kasutusjuhend
Patchcord cat.6 FTP 1M 10-pack fluke passed red Cable construction: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: conductors: copper, CCA; sheath: PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
"Qoltec 57037 4G LTE ümbersuunatud antenn DUAL | 5dBi | Väliantenn on vastupidav ja mitmekülgne antenn, mis on mõeldud 4G LTE signaali kvaliteedi ja tugevuse parandamiseks. Tänu oma kõikehõlmavale võimekusele on see antenn ideaalne välitingimustes kasutamiseks, pakkudes täielikku katvust ja suurepärast ühenduvust teie seadmetele, olenemata sellest, kas olete eemal või soovite suurendada signaali vastuvõttu keerulises keskkonnas. 5 dBi võimendus tagab suure signaali võimenduse, mille tulemuseks on suurem andmeedastuskiirus ja suurem ühenduse usaldusväärsus. Kahehäälne seadistus võimaldab samaaegset ühendust mitme seadme või võrguga, optimeerides jõudlust nii tööstuslikuks kui ka isiklikuks kasutamiseks. Välitingimustele vastupidavaks kavandatud antenn on ehitatud vastupidavasse, karmi ilmastikukindlasse konstruktsiooni, mis tagab vastupidavuse ja püsiva jõudluse. Antenni on lihtne paigaldada, sest kaasas on kõik vajalikud paigaldusvahendid ja üksikasjalikud juhised, mistõttu on seda lihtne paigaldada ka minimaalsete tehniliste teadmistega inimestele. Parandage oma traadita seadistust Qoltec 57037 abil ja nautige stabiilset, kiiret internetiühendust, mis vastab teie praegustele ja tulevastele digitaalsetele vajadustele.
Lanberg patch cord is the perfect solution for any computer network. By using high-quality materials and precise workmanship, Lanberg offers patch cords that provide fast, stable and reliable connections.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Access Point WAX620 Access Point WiFi 6 AX3600 High-performance Business WiFi system Faster and more reliable dual-band WiFi 6 with 8 streams and up to 2.4 Gbps in the 5 GHz band and 1.2 Gbps in the 2.4 GHz band. Ideal for high-density environments Superior WiFi performance for schools, hotels, restaurants and conference centres. Greater network capacity Enjoy 4 times the capacity of your current WiFi device and greater performance to extend battery life. Seamless wireless networking Wire-free installation with other WAX620, WAX610, WAX610 Y, WAC540 or WAC564 devices creates the perfect seamless network for business. Multi-Gigabit speeds Includes a 2.5Gbps Ethernet port with PoE technology for fast wired network connectivity and easy cabling.
Lanberg patch cord is the perfect solution for any computer network. Thanks to high-quality materials and precise workmanship, Lanberg offers patch cords that provide a fast, stable and reliable connection.This product is compatible with a variety of network devices, such as routers, switches, servers and computers, which allows its versatile use. Using Lanberg patch cord, you can count on trouble-free operation, whether it's a home office or a vast corporate network.
Patchcord cat.6 FTP 0.5M 10-pack fluke passed white Cable type: 26AWG (7 x 0.16mm) Outer diameter: 5.7mm +/- 0.2mm Material: Copper conductors, CCA; sheath: PVC Frequency: up to 250MHz Throughput: up to 10 Gb/s Conductor layout compliant with ANSI/TIA/EIA-568-B standards Fulfils the requirements of IS0/IEC 11801 class E
The 8-port Gigabit L2+ Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports are integrated that can be configured for specific requirements using various interfaces. The installation height is one rack unit.
The 8-port Gigabit PoE Switch is designed for the networks of small to mid-sized companies. With special features such as port control, port mirroring, VLAN functions and multicast support, the switch is optimally tailored to the application convergence needs of mid-sized networks. Based on ASIC integration technology, non-blocking IP switching solutions are supported with gigabit speed. The switch can be used as a desktop switch or for installation in 10-inch housing. 8 gigabit ports with PoE+ support and a total output of 80 watts are integrated, which you can use to operate devices such as wireless access points, IP cameras or VoIP telephones. The switch can be configured for specific requirements using various interfaces. The installation height is one rack unit.
Smart L3 Managed Stackable Switches DGS-1520 Series Stacking Physically stacking up to 8 switches for expansion and redundancy. Touchless installation Seamless multi-site deployment with automatic configuration download. Large PoE budget Power over Ethernet (PoE) budget up to 370W allows you to power multiple devices. 10G connections Four 10-gigabit ports for stacking or uplinking. Multi-gigabit PoE ports Four 2.5G PoE ports, ideal for Gigabit Wi-Fi 6 access points. Redundant power An optional redundant power supply ensures uninterrupted operation. Advanced L2 and L3 features Easily adapt to network changes with selectable Q-in-Q, VRRP, RIP and OSPF features. Limited Lifetime Guarantee Register your product to take advantage of Lifetime Limited's lifetime warranty. A new dimension in Managed Smart Switches Expandable network with high-performance 10-gigabit stackable switches to increase productivity and uptime. x8 Eight connected switches form a redundant stack with up to 384 gigabit ports. 188Gbps High throughput data transfer between connected devices at up to 188 Gbps. x4 Four 2.5G PoE ports (PoE models), ideal for Wi-Fi 6 access points. High availability Simplification of management and cabling increases the efficiency and reliability of the network. Physical stacking up to 8 switches with a total bandwidth of 80G. Designed with Wi-Fi 6 in mind The multi-gigabit 2.5G ports on the DGS-1520 series PoE switches eliminate potential bottlenecks in connecting to WiFi 6 gigabit access points. Touchless deployments For multi-site network expansion, the latest firmware and network configurations for the DGS-1520 series switches can be downloaded without the need to involve on-site IT personnel, making deployments easier and faster. Advanced L2 and L3 features Advanced, selected software features - Q-in-Q, VRRP, RIP and OSPF enable adaptation to changes in the network. For businesses with increasing bandwidth and network expansion requirements, the DGS-1520 series switches are a cost-effective upgrade option with 10-gigabit connections for network infrastructure. Hybrid staking Stack up to eight DGS-1520 switches using 10GBASE-T copper and/or SFP+ fiber ports. Hybrid stacking support increases cabling capability and lower cost by using copper instead of fiber. Simplified management Centrally manage multiple large networks with wired or wireless devices using D-View 7 to reduce cost and maintenance. There is also a D-Link Network Assistant (DNA) available to simplify setup and management of smaller networks.
Desktop switch, 16 gigabit ports, including 16 PoE+ ports 16 Gigabit RJ45 ports 16 PoE+ ports, power and data transfer via one cable Compatibility with PoE-powered devices operating in IEEE 802.3af/at standards. Up to 30 W of PoE power on each PoE port PoE power supply support up to 120W for all PoE ports Up to 250m of data and power transmission in Extend mode Priority mode provides high priority for ports 1-4 Isolation Mode enables one-click separation of client traffic for improved security and performance. Automatic restart of PoE-powered devices that are dead or unresponsive thanks to the PoE Auto Recovery function. Plug and play connection, no configuration or complicated installation required. Dedicated 16 PoE+ ports (120 W budget) for many applications Compatibility with the 802.3af/at PoE+ standard provides up to 30 W of power on each PoE port. A total PoE power budget of 120W* for 16 PoE+ ports opens up a wide range of applications such as surveillance in offices, dorms and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers and more Perfect for monitoring - Up to 250 m of transmission Thanks to the Extend mode, the transmission distance can reach up to 250m, perfect for installing IP cameras in large areas. Auto lifting system with PoE Auto Recovery The switch automatically detects and restarts PoE-powered devices such as cameras and access points when they stop working or become unresponsive, ensuring stable device operation without the need for manual monitoring and restarting. Intelligent power management When total power consumption exceeds 120W, Intelligent Power Management turns off power to the lowest priority port to provide power to higher priority ports and thus protect the device from overload. It also enables automatic detection of the PoE power required by a given device and protects non-PoE devices from damage. Durable metal housing The internal components of the TL-SG116P switch are protected by a high-quality metal housing ensuring a long product life. After passing a series of rigorous reliability tests, the TL-SG116P delivers switching performance you can rely on.
