Tool-free FTP RJ45 cat.6a keystone socket can be installed in any adapter for keystone connectors with dimensions (height x width) 16,10x14,50mm eg in adapters for 45x45 sockets, electrical equipment frames, modular panels, thanks to which the list of applications is very wide this module. The LAN socket has an IDC connector cover and a 568A / B colored connection sequence designation.
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 1.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 3 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The DIGITUS L2 managed Gigabit PoE Switch with 8 PoE+ ports and 2 Gigabit SFP ports is ideal for use in various network topologies such as SMBs. The extensive L2 configuration options allow you to increase the performance and efficiency of your network. The switch offers the possibility to segment the network via VLAN, the QoS feature ensures smooth data exchange for time-critical applications. The Spanning Tree Protocol or the Port Trunk can be used to create fail-safe connections with other switches. The switch can be managed via the web interface, SNMP, SSH or Telnet.
LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
MR70X | Available bandwidth 1800 Mbps | Data transmission speed 1200 Mbps | Wi-Fi 6 | 1 WAN | 3x10/100/1000M | Antenna Type Omni-Directional | Antenna Gain 5 dB | Number of antennas 4 | Dimensions 208.8 × 171.6 × 41.7 mm
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
Belkin NPA004BTBK. Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Jaoturi liidesed: 3.5mm, USB tüüp-C. Maksimaalne värskendussagedus: 20000 Hz, Toote värv: Must, USB Power Delivery kuni: 60 W. Pistiku tüüp: Tüüp C. Laius: 33 mm, ...
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
Delock PCI Expressi kaart laiendab teie arvutit kahe välise USB 3.0 pordiga. Saate ühendada USB 3.0 seadmeid nagu nt. dokkimisjaamad, kaardilugejad, välised kõvakettad, hubid jne.
See toitejuhe võimaldab ühendada ja toita 2 SATA-kõvaketast toiteallika ühe SATA 15-pini pordi kaudu. Spetsifikatsioon - Toitepistik 2 x SATA kõvaketta jaoks - Ühendus: 15-pini SATA > 2 x SATA HDD - sirge - Kaabli gabariit: KAABEL: 18 AWG - Kaabli pikkus: umbes 15 cm
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja on allapoole ühilduv Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x mini DisplayPort isane > 1 x DisplayPort isane - Sisend = mini DisplayPort; väljund = DisplayPort - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 32 AWG - Kaabli läbimõõt: umbes 5,5 mm - Vaskjuht - Varjestus - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: must - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Üks vaba mini DisplayPort-liitmik Pakendi sisu - Mini DisplayPort kaabel
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 34 AWG - Kaabli läbimõõt: ca 4,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 1 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
