Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
Discover the reliability and performance of the Ubiquiti UniFi network cable, a vital component for any modern network setup. This CAT 6 patch cable features male RJ-45 connectors on both ends, ensuring a secure and efficient connection between your devices. With compliance to TIA/EIA-568-B.2 standards, it delivers dependable network performance. Additionally, its VW-1 (UL1581) certification attests to its safety and durability, making it an ideal choice for indoor environments. Whether for home or office use, this network cable is designed to meet the demands of your networking needs, providing a stable and high-speed data transmission solution.
Deco BE65 BE11000 Whole Home Wi-Fi 7 System Tri-Band 11Gbps Wi-Fi 5760Mbps (6GHz) + 4320Mbps (5GHz) + 574Mbps (2.4GHz). 2.5Gbps Wired Connections 4 x 2.5Gbps ports provide maximum flexibility and increased throughput. Wireless and Wired Backhaul combines the wireless and wired backhaul to each unit simultaneously to improve overall throughput and reduce latency. Multi-Link Overlay (MLO) Supports simultaneous sending and receiving of data on different bands and channels to increase throughput, reduce latency, and improve reliability. 320MHz channels double the throughput and enable many more simultaneous transmissions at the fastest possible speeds. It operates in the 6 GHz band, minimizing spectrum congestion from the ground up, ensuring reliable and fast connections. TP-Link HomeShield provides comprehensive network protection, robust parental controls, and real-time IoT security. Universal CompatibilityBackwards compatible with all Wi-Fi generations and works with any Internet Service Provider (ISP) and modem. Wi-Fi 7, Wi-Fi like never before Wi-Fi 7 delivers stunning performance with increased throughput, lower latency, stronger interference protection, and higher efficiency. Join the league of professionals and experience the next generation of Wi-Fi performance. Unrivaled Wi-Fi 7 speeds up to 11 Gbps Wi-Fi 7 unleashes the full potential of 4K-QAM and the 6 GHz band with channels up to 320 MHz, delivering unprecedented Wi-Fi speeds of up to 11 Gbps. The new 6 GHz band provides exceptional bandwidth for congestion-free channels. Ultra-fast 2.5Gbps Wired Performance 4 x 2.5Gbps ports maximize your home internet speeds, reaching up to 2.5x faster wired speeds than a typical Gigabit Ethernet port. The additional USB 3.0 port makes Deco BE65 the perfect solution to future-proof your home network. Connect your favorite wired devices to Deco BE65 and be amazed. Best Backhaul: More Powerful and Flexible With our proprietary technology, Deco BE65 can combine wireless and wired backhaul transmission to each unit simultaneously. Moreover, with the latest Wi-Fi 7 MLO technology, the combined speed of wireless and wired backhaul aggregation is increased. This significantly improves overall throughput and reduces latency, providing wider coverage and more stable and reliable connections. Supported VPN Clients and Servers Allow devices on your home network to access remote VPN servers without having to install VPN software on each device. You can create different types of VPN connections, including OpenVPN, PPTP, and L2TP/IPSec VPN. In addition, Deco can run both VPN and regular internet connections simultaneously, providing security and flexibility.
Wi-Fi Access Point 6 AX1800 PoE DAP-X2810 Wi-Fi 6 AX1800, up to 1.8Gbps Dual-band, 2x2 MIMO, airtime fairness and bandwidth control functions Free software and Nuclias Connect app Convenient installation with PoE Configurable captive portal D-Link Lifetime Limited warranty Scalable and easy to manage corporate WiFi network 6. The DAP-X2810 with Wi-Fi 6 networking provides businesses of all sizes with fast connections, significantly increased capacity and interference-free coverage, all combined with centralised management via Nuclias Connect. Easy management of your corporate network The DAP-X2810 works with Nuclias Connect, a software-based management platform (with optional hardware controller). This enables you to manage and control your business network from anywhere via the Internet, providing easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation - Wi-Fi 6 Greater network performance and lower latency, with almost four times the capacity of previous Wi-Fi standards Secure performance WPA3 encryption provides security with high throughput with dual-band 2x2 MU-MIMO technology, bandwidth control and airtime fairness to intelligently manage users. Flexible deployment with PoE Support for Power over Ethernet (802.3at) simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. No licence required Work as a standalone access point or as part of a centralised, scalable multi-device deployment according to the needs of the business. More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options for delegated access across the network. Deployment, configuration, upgrading and expansion is possible from multiple locations using an intuitive dashboard. Captive portal Captive Portal, the industry standard for authentication, streamlines access management with the ability to add brand information. Free software and application Quickly configure, manage and monitor access points locally via a free management tool or remotely via the Nucliast Connect app. Next-generation WiFi 6 performance with huge speed improvements Combined Wi-Fi 6 802.11ax connection speeds of up to 1,800 Mbps provide the DAP-X2810 with lightning-fast transfer rates, enabling large amounts of data and efficient video streaming, even in high-density environments Next-generation Wi-Fi 6 connections deliver higher network performance and lower latency, and nearly four times the capacity of previous Wi-Fi standards. Optimised Wi-Fi for convenient connections The DAP-X2810 supports 2x2 MU-MIMO bandwidth control and beamforming functions, which are designed to reduce network congestion. In addition, load-balancing technology and Airtime Fairness manage access point loads to optimise resource utilisation. This ensures that each device connected to the network connects at peak performance without overloading the entire network. Multiple modes of operation The DAP-X2810 can be configured to suit your network needs and optimise network performance. Access point Wireless distribution system (WDS) with access point WDS/bridge (without AP broadcast) Wireless client Easy and hassle-free installation anywhere. The DAP-X2810 can be placed on a desk, ceiling or wall mounted. The PoE function makes installation quicker and easier as there is no need to lay additional power cables. This is ideal for extensive deployments in locations where power sockets are not readily available. Corporate network management with advanced control mechanisms Nuclias Connect enables you to manage and control your network from anywhere. It provides insight into network performance and user activity through traffic analysis and status reports, available in a browser or free app. Detailed data from network traffic analysis, which can be displayed for the entire network down to the single access point level, can be used to create business value. Comprehensive on-site network management Nuclias Connect, compared to traditional hardware-based unified management systems, offers a great deal of flexibility. Easy configuration, remote access and an intuitive dashboard provide administrators with management efficiency and convenience, while functionality and automated network tools such as airtime fairness, throttling location and load balancing improve the user experience. Scale up your WiFi network as your business grows Nuclias Connect enables unlimited scalability, allowing you to adapt the size of your network to suit your business requirements. Expanding or setting up a network in a new location is quick and easy. Management and configuration is done via the cloud, and access points and surveillance cameras are automatically detected and ready for deployment right out of the box. Greater brand awareness with captive portal Guest web visitors are not only able to connect using an email address, Facebook or Google account. Captive portal enables increased brand awareness, the placement of advertisements and promotions, and the collection of user information to gain a better understanding of customer behaviour.
"Tenda Nova Mesh System EX3 (3 tk) on mitmekülgne ja tõhus kodune Wi-Fi lahendus, mis on loodud selleks, et kõrvaldada surnud tsoonid ja tagada sujuv internetilevi kogu kodus. See kolmekomplektiline võrgusüsteem sobib ideaalselt suurematesse ruumidesse või mitmekorruselistesse kodudesse ja tagab, et saate nautida tugevat ja järjepidevat Wi-Fi-signaali igas nurgas. EX3-seadmed töötavad koos, kasutades täiustatud võrgutehnoloogiat, et luua ühtne võrk, mis annab teile ühe Wi-Fi nime (SSID) ja välistab vajaduse vahetada võrku, kui te ruumis ringi liigute. Lihtne seadistamine mugava Tenda rakenduse abil - saate samm-sammult ühendada ja hallata oma võrgu seadeid ükskõik kust. Nutikad võrgu optimeerimisfunktsioonid valivad automaatselt kiireima võimaliku andmeside tee, et vähendada puhverdamist ja viivitusi, mistõttu on see ideaalne video voogedastuseks, võrgumängudeks ja mitme seadme samaaegseks toetamiseks. Lisaks on Tenda Nova Mesh Systemil tugevad turvaprotokollid, mis kaitsevad teie andmeid ja seadmeid häkkimise eest. Seadmete moodne, kuid samas tagasihoidlik disain sulandub sujuvalt teie kodu sisustusse, pakkudes samas võrratut ühenduvust ja usaldusväärsust. Ükskõik, kas töötate kodus, striimite oma lemmiksaateid või domineerite online-mängudes, Tenda Nova Mesh System EX3 on loodud selleks, et pakkuda suure jõudlusega Wi-Fi ühenduvust lihtsuse ja stiiliga.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Type 3G/4G Modem | Data transmission speed 300 Mbps | Number of antennas 2 | Wireless Frequency Range 2.4 GHz | Wireless Transmit Power 20 dBm | Power supply requirements 12V/1A DC | Dimensions 226.6 x 100x 54.7mm
Features next-generation Bluetooth 6.0 with BLE for ultra-efficient, low-power wireless connectivity Built with LE Audio technology to deliver enhanced audio clarity while minimizing power consumption Supports seamless connection with up to 7 devices Ultra-small design for unmatched portability
The TL-SF1024D Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 24 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
Original part number CS22U-A7 Product name ATEN CS22U 2-Port USB KVM Switch, Remote port selector, 0.9m cables Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 2048 x 1536 pixels Active port selection pushbutton Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.8m for PC with USB, USB, D-Sub-15 conectors - 2pcs Width 82 mm Height 25 mm Depth 77 mm Net weight 310 g Additional information integrated cablesNo power supply neededsupport for multifunction keybords and mousessupport for Win, MAC, Linux and Sun Datasheet Datasheet More info More info
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
Original part number CS1308-AT-G Product name ATEN KVM 8/1 USB PS/2 OSD 19" Producer Aten Class of product KVM switches Number of PC ports 8 Supported keyboard/mouse/display ports PS/2, PS/2, D-Sub-15USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case Rack 19" Maximal resolution 2048 x 1536 pixels Active port selection keyboard hotkeyspushbuttonthrough OSD Menu Possibility of joining into cascade Yes Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computerseasy firmware upgrade Standard accessory clip handleAC adaptercommunication cable Width 440 mm Height 44 mm Depth 160 mm Net weight 1.89 kg Additional information 2k/XP/Vista Win, Linux, Mac, Sun compatibleCascade connection o 8 switches allows on control over 64 computersTwo logging levels. Separate profiles of users and administratorHot plugable - pluging in and out devices without switching off
The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
300Mbps Wireless N Router 300Mbps wireless speed is ideal for HD streaming, online gaming, and large file downloadsTwo 5dBi antennas greatly increase wireless signal strength, size and stabilityIntuitive webpage guides you through the setup process in minutes. 300 Mbps | IEEE 802.11b | IEEE 802.11g | IEEE 802.11n | Number of antennas 2.
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.HARDWAREMobile4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMACPUQuad Core ARM Cortex A7 717 MHz CPUMemory256 MBytes Flash, 256 MBytes DDR3 RAMEthernet4 x 1 Gbit Ethernet ports: 1 x WAN (configurable as LAN), 3 x LANWiFiDual-Band 802.11ac Wave 2 (WiFi 5) with MU-MIMO support and data transmission rates up to 867 Mbps.Power supply9 - 50 VDC, 4 pin DC connectorConnectors1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA, 1 x GPS SMASIM2 x external SIM holdersStatus LEDs1 x Power, 2 x SIM, 3 x Mobile network type, 5 x Signal Strength, 2 x WiFi band status, 1 x WiFi status, 8 x Ethernet status, 4 x WAN type LEDsOperating temperature-40 °C to 75 °CHousingFull aluminium with grounding terminalDimensions115 mm x 95 mm x 44 mmWeight456 gSOFTWAREOperating systemRutOS (OpenWrt based Linux OS)SIM switch2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection failMultiple PDNPossibility to use different PDNs for multiple network access and servicesNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, TelnetNetworking featuresNAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsUnique networking featuresVLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto FailoverConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionAutheticationPre-shared key, digital certificates, X.509 certificatesKeep settingsUpdate FW without losing current configurationMonitoring & ManagementWEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMSSupported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment provided
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)