Layer 2 Features Link Aggregation Control Protocol (LACP) 4K VLAN GVRP (GARP VLAN Registration Protocol) Port Isolation STP/RSTP/MSTP IGMP Snooping Quality of Service 4 priority queues Support IEEE 802.1P DSCP QoS Rate limit feature Security Strategies IP-MAC-Port-VID Binding Access Control List (L2~L4 ACL) 802.1x and RADIUS Authentication Support DoS defend Port Security SSL and SSH encryptions Management Web-based GUI Command Line Interface SNMP v1/v2c/v3 RMON (1,2,3,9 group)
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE.
Netgear 5 x 10/100/1000 Platinum Ethernet Switch, Lifetime Hardware Warranty Type Ethernet Switch Modem speed 10/100/1000 Mbps Gigibit Ethernet I/O ports 5 Ports Connector type Plastic LED Power, Link/Activity Form Factor Desktop or wall-mountable Noise 0 dBA (Fanless) Power 5V / 0.7A DC Power Adapter Power consumption 2.34 W Max. Features Energy Efficient Ethernet Support (IEEE 802.3az); 9,216 bytes Jumbo Frame Support; 2K MAC table; 1 Mbit Packet buffer; MTBF (@ 25° C): 1,386,257 hours; Electromagnetic compliance: Class B Dimensions 118 x 73 x 30 mm Weight 0.10 kg
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
Features- One USB console controls eight Single Link DVI or VGA computers and two additional USB 2.0 devices- Supports both digital (DVI) and analog (VGA) video – mixed operation Possible- Cascadable to three levels – control up to 512 computers- Multiview mode – stack up to four CS1768 units and display video from up to four monitors (dual view / triple view / quad view)- Computer selection via front panel pushbuttons, hotkeys, and multilingual on-screen display (OSD)- OSD Backup/Restore function – enables the administrator to back up the switch´s configuration and user profile information- 2-port USB 2.0 hub built in- Fully compliant with the USB 2.0 specification- Two-level (Administrator/User) password authorization for enhanced security protection- Multilingual OSD supports English, German, Japanese, Traditional Chinese, Simplified Chinese, Spanish, Russian, and French- Audio enabled – full bass response provides a rich experience for 2.1 channel surround sound systems- Console audio ports on front panel for easy access- Multiplatform support – Windows, Linux, Mac, Sun- Supports widescreen resolutions- Superior video quality – 1920 x 1200 (Single Link DVI); 2048 x 1536 (VGA); DDC2B- Independent switching of KVM and USB focus- DVI digital and analog monitor support – fully compliant with the DVI specifications- HDCP compatible- Video DynaSync™ – exclusive ATEN technology eliminates boot-up display problems and optimizes resolution when switching between ports- Console mouse port emulation/bypass feature supports most mouse drivers and multifunction mice Chinese, and Spanish- Complete keyboard emulation for error-free booting- Mac/Sun keyboard support and emulation*- Multilingual keyboard mapping – supports English (US), English (UK), French, German, Japanese, Korean, Traditional- Auto Scan Mode for monitoring all computers- Broadcast mode – allows you to send commands from the console to all computers to perform operations simultaneously.- Firmware upgradableNote: PC keyboard combinations emulate Mac/Sun keyboards; Mac/Sun keyboard work only with their own computersPackage Contents- 1x CS1768 8-Port USB DVI KVM Switch with Rack Mounting Kit- 2x 2L-7D02U USB DVI-D KVM Cable Sets- 1x Firmware Upgrade Cable- 1x 0AD6-1605-24EG Power Adapter- 1x Foot Pad Set (4 pcs)- 1x User InstructionsKontrollitavate arvutite arv8Klaviatuuri pordi tüüpUSBHiire pordi tüüpUSBVideopordi tüüpDVI-IUSB 2.0 portide arv10Kõrvaklapiväljundite arv8DVI-I liideste arv8VGA (D-Sub) portide arv1Mikrofoni sisendite arv8Maksimaalne resolutsioon2048 x 1536 pikslitMaksimaalne digitaalresolutsioon1920 x 1200 pikslitMaksimaalne analoogresolutsioon2048 x 1536 pikslitToote värvSinineLED-indikaatoridJahMaterjalMetallSkaneerimisintervall255 sVõimsustarve (tüüpiline)3,76 WKasutamistemperatuur (T-T)0 - 50 °CHoiustamistemperatuur (T-T)-20 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 80 protsentiRoHS-vastavusJahSertifikaatTW I220489, CN ZL 02824593.8, DE 202004004227.4, JP 4558319, JP 4651633, TW 203183, TW I220476, TW I285828, US 6934398, US 6957287, US 7047344, US 7269265, US 7340556, US 7472217RoHSLaius161,1 mmSügavus437,2 mmKõrgus44 mmKaal2,8 kgKaablid kaasa arvatudKVMKiirpaigaldusjuhendJahJuhendJahAC-adapter kaasa arvatudJahÜhenduvustehnoloogiaJuhtmega ühendatudPortide hulk8Ühilduvad operatsioonisüsteemidWindows, Linux, Mac, Sun
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e FTP (shielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , Conductor stranding pikkus: 305 m värv: hall
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
Cable length: 2 Other features: Length: 2m, AWG 26 (8*7*0.16mm), Conductor stranding: cord 7*0.16mm, HDPE conductor insulation: 0.98mm, With aluminum foil for each pair, With 80*0.12ALMG braid. LSZH external insulation: 6.0mm, Color: Black RAL9004, Operation up to 500Mhz, Compatibility with ANSI/TIA/EIA-568B standards, Packaging: string bag.
BAT120 on esimene tööstuslik UPS (katkematu toiteallikas) Teltonika Networks'i tootevalikus. BAT120 on varustatud kahe 4-poolse alalisvoolupordiga toite sisse- ja väljundi jaoks. Sisendpinge ulatub 9V kuni 30V ja väljund 12VDC, kui see töötab akupealt. Kuigi kaasaegne tehnoloogia võimaldab meil teha imelisi asju, on see siiski tundlikum kui paljud arvavad. Seadmed sõltuvad stabiilsest ja pidevast energiavarustusest, et õigesti toimida. Kuna paljud süsteemid võivad elektrivoolu kõikumise tõttu katkeda, pakub Teltonika Networks teile võimalust pakkuda stabiilset energiat ühilduvatele* seadmetele meie uusima lisandiga. Ühilduvate seadmete hulka kuuluvad: RUT2xx, RUT9xx, RUT3xx, RUTXxx, TRB1xx, TRB2xx, TSW110 ja TCR100. Teltonika Networks toob turule BAT120, katkematu toiteallika lisaseadme! See uus täiendus meie tooteportfelli pakub ühilduvatele toodetele püsivat elektrivoolu, tagades teie IoT-lahenduse pideva ühenduvuse. Teltonika Networks'i tooted taaskäivituvad pinge kõikumise korral. See turvafunktsioon võib aga häirida pidevat andmevoolu, kui vajate pidevat ühenduvust ilma vähimagi katkestuseta. Kui tekib ootamatu elektrikatkestus, võib BAT120 toita ühendatud Teltonika Networks'i seadmeid kuni 6 tundi, vältides ühenduse katkemist ja pakkudes piisavalt aega esmase elektrivõrgu taastamiseks. Seda võimaldavad kaks 18650 Li-Ion akut. Samuti saate seadistada meie ühilduvaid seadmeid saatma SMS-i või e-posti hoiatuse, kui tekib voolukatkestus, mis võimaldab teil häirega kursis olla ja selle võimalikult kiiresti kõrvaldada. Kasvavad linnad toovad rohkem tehnoloogiat ühte kohta, eriti arengumaades. Elektrivõrgu laienemine ei suuda nõudlusega sammu pidada. Elektrijaamu, mis toodavad energiat taastuvatest allikatest, nagu tuul ja päike, ei saa pidevalt optimaalselt ära kasutada, tekitades ebaühtlase elektrivoolu. Ka elektrijaama ja lõpptarbija vaheline kaugus on stabiilse energiavarustuse seisukohalt oluline. Lõpuks kahjustab elektrivõrgu ebaseaduslik ühendamine oluliselt selle üldist stabiilsust, mistõttu tuleb seda pidevalt jälgida, kuid see ei ole selliste tegevuste eest täiesti ohutu.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. The latest Cube 60Pro series is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances stability speed and convenience.
"26-Port Cloud Managed Desktop Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
> Layer 2 management PoE switch > Intelligent PoE > Red port supports 90W IEEE802.3bt > Web management with friendly interface and easy operation > 250 m long distance PoE transmission > PoE watchdog > Plug and play Communication Standard: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE 802.3ab; IEEE 802.3z PoE Standard: IEEE802.3af/ IEEE802.3at/ Hi-PoE/IEEE802.3bt Port 1-16: 16 × RJ-45 10 M/100 M (PoE) Port 17-18: 2 × RJ-45 10 M/100 M/1000 M (uplink) Port 17-18: 2 × SFP 1000 M (uplink) (combo) PoE Budget: Port 1-2 ≤ 90W, Port 3-16≤ 30W, total ≤ 240W
AX5400 Ceiling Mount WiFi 6 Access Point - Blazing-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 4804 Mbps on 5 GHz totals 5378 Mbps WiFi speeds.† - High-Efficiency WiFi 6: More connected devices can enjoy faster speeds. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or Omada app. - 160 MHz Channel: Double the data at peak transmission times on a single stream with HE160.‡ - Seamless Roaming: Video streams and voice calls are unaffected as users move between locations.§ - Omada Mesh: Enables wireless connectivity between access points for extended range and flexible deployment.§ - PoE+ Powered: Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations. EAP670 Type Wireless Access Point, Data transmission speed 5378 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Built-in, Wireless Frequency Range 2.4 GHz/5 GHz Dimensions 243 × 243 × 64 mm
