802.11ac Dual-Band Wireless-AC1200 Router, Ports: RJ45 for 10/100/1000 BaseT for WAN x 1, RJ45 for 10/100/1000 BaseT for LAN x 4, USB 2.0 x 1, External antenna x 4
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.The GESP units can usually absorb multiple impacts but make sure to check their condition after each surge. For attachment of GESP units it's recommended using PVC zip ties. Just don’t make it too tight. You know what they say – hope for the best prepare for the worst. This small investment can save lots of time and money so why risk it? Grab a GESP & GESP+POE-IN and put your mind at ease!
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
8 x Gigabit PoE+ ports 2 x Gigabit ports 2 x SFP slots 110W PoE power budget Easy-to-use web-based management interface Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping Extend PoE+ signal up to 656 ft./200m at 10Mbps Front panel 4-digit LED display provides PoE power statistics Surveillance mode GUI for simplified configuration and network monitoring Device discovery for ONVIF compliant IP cameras and NVRs Upload building floorplans to create an E-map of surveillance devices Change IP camera IP address settings Upgrade IP camera firmware Change IP camera administrator user name and password Bandwidth control per port 802.1Q, MAC, Surveillance, and Voice VLAN support IEEE 802.1p QoS with queue scheduling support 24Gbps switching capacity IEEE 802.1p QoS with queue scheduling support TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device auto-recovery and power scheduling. Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance fiber networking applications. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature. Smart Surveillance Management These managed ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device. Integration Flexibility Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration. PoE Device Alive Check PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. Hardware Design Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included PoE Power Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices Surveillance Mode ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device Long Range PoE+ Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps 4-Digit PoE LED Display 4-digit 7-segment LED display to view total power, available power, and power-per-port IPv6 Ready ONVIF switches support IPv6 configuration and IPv6 neighbor discovery Traffic Management Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management Troubleshooting A convenient cable diagnostic test and traffic statistics aid in network troubleshooting Monitoring RMON, SNMP, and Port Mirroring support administrator monitoring solutions
16 x Gigabit-porti 32 Gbps kommutatsioonivõimsus Karastatud IP30 klassifikatsiooniga metallist korpus Sisaldab DIN-riba paigalduskinnitust Töötemperatuuri vahemik -40° - 75° C (-40° - 167° F) Toetab LACP, STP/RSTP, VLAN ja IGMP Snooping'i IEEE 802.1p QoS koos järjekorra ajastamise toetusega Sageduspiirangu juhtimine pordi kohta Redundantsed toitesisendid koos ülekoormusvoolukaitsega Alarmiväljund, mis käivitub voolukatkestuse korral TRENDneti 16-portiline tööstuslik Gigabit L2 hallatav DIN-Rail switch, mudel TI-G160i, pakub täiustatud haldusfunktsioone koos 32 Gbps lülitusvõimsusega. Kasutajatel on võimalik lülitiga ühendada kuusteist seadet kiireks gigabitvõrguühenduseks. Lüliti on varustatud IP30 klassifikatsiooniga metallkorpusega, mis on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F) tööstuskeskkondades. Täiustatud liiklusjuhtimise kontroll, tõrkeotsing ja SNMP-seire tugi teevad sellest võimsa lahenduse VKE-võrkudele. Löögi- ja vibratsioonikindel Tööstuslikud 2. kihi hallatavad lülitid on hinnatud löögi- (EN 60068-2-27), vabalangemise (EN 60068-2-32) ja vibratsioonikindlaks (EN 60068-2-6). Integreerimise paindlikkus Hallatava 2. kihi funktsioonide hulka kuuluvad VLAN, IGMP snooping, QoS, RMON, SNMP trap ja syslog jälgimiseks ja paindlikuks võrguintegratsiooniks. Tööstuslik disain IP30-klassi metallkorpusega varustatud tööstuslik hallatav 2. kihi kommutaator töötab laias temperatuurivahemikus -40° - 75° C (-40° - 167° F). Võrgupordid 16 gigabitist pesa Liikluse juhtimine Lai valik võrgukonfiguratsioone on toetatud: 802.3ad linkide koondamine, privaatne VLAN, 802.1Q VLAN, RTSP, Loopback Detection, 802.1p teenuseklass (CoS), portide ribalaiuse haldamine ja QoS järjekordade ajastamine. Juurdepääsu kontroll Sellised funktsioonid nagu ACL, MAC/portide filtreerimine, 802.1X ja RADIUS ühilduvad mitmekihilise juurdepääsukontrolliga. Seire RMON, SNMP, SNMP Trap ja portide peegeldamine toetavad administraatori järelevalvelahendusi. DIN-riba paigaldus IP30 klassifikatsiooniga metallist korpus sisaldab DIN-riba paigalduskinnitust Lülitusvõimsus 32 Gbps lülitusvõimsus Redundantne toide Redundantsed toitesisendid koos ülekoormusvoolukaitsega (toiteallikas müüakse eraldi: TI-M6024) Häirerelee Häirerelee, mis käivitub esmase ja/või üleliigse toiteallika voolukatkestuse korral. Jumbo Frame Saadab suuremaid pakette ehk Jumbo Frame'i (kuni 10 KB), et suurendada jõudlust. Ekstreemsed temperatuurid Tööstuslüliti on arvestatud laiale töötemperatuuri vahemikule -40 - 75° C (-40 - 167° F). Löögi- ja vibratsioonikindel Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6). Maanduspunkt Maanduspunkt kaitseb seadmeid väliste vooluülekannete eest.
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort liidesega seadmete, nt. kuvarid, projektorid või telerid arvutisse või sülearvutisse. Kolmekordse varjestatud kaabel toetab eraldusvõimet kuni Ultra HD (4K @ 60 Hz) ja on allapoole ühilduv Full-HD 1080p-ga. Spetsifikatsioon • Ühendused: 1 x mini DisplayPort isane > 1 x DisplayPort isane • Sisend = mini DisplayPort; Väljund = DisplayPort • DisplayPort 1.2 spetsifikatsioon • Pin 20 pole ühendatud • Kaabli läbimõõt: 32 AWG • Kaabli läbimõõt: ca. 5,5 mm • Vaskjuht • Võrguvarjestus • Kontaktid kullatud • Heli- ja videosignaalide edastamine • Andmeedastuskiirus kuni 21,6 Gb/s • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Värvus: must • Pikkus sh. pistikud: ca. 1 m
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Nailonpunutisega - Kullatud pistikud ja metallist korpus - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: antratsiit - Pikkus koos pistikutega: ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
This cable duct by Delock can be used to bundle and conceal exposed cables, to protect them from dirt or damage. Toolless assembly The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold. Plenty of space for different cables Depending on the diameter and thickness of the individual cables e.g. antenna cables, HDMI cables, audio cables or power cables can be accommodated. Thus the cables are safely and orderly stowed away. Reusable The upper part of the cable duct can be easily removed by sliding it out to add or remove cables. Specification • self-adhesive • Reusable • Individually shortenable • Environmental temperature: -40 °C ~ 65 °C • Material: PVC • Colour: white • Dimensions (LxWxH): ca. 1000 x 30 x 8 mm Package content • Cable duct
Seda Delocki pikenduskaablit saab kasutada 8-pini EPS-pistikutega emaplaadi toiteks. Spetsifikatsioon - Pistikud: 1 x 8-pini EPS-istmik > 1 x 8-pini EPS-liitmiku pesa - Pinge: 12 V - Kaabli gabariit: 20 AWG - Pikkus koos pistikutega: ca. 30 cm Süsteeminõuded - Vaba 8-pini EPS-liides Pakendi sisu - Toitejuhe
Lanberg's toolless Cat.7 FTP RJ45 keystone can be mounted in any adapter having appropriate connectors with dimensions (height x width) of 16,10 x 14,50mm e.g. inside of adapters for 45x45 sockets, electrical equipment frames or modular panels - therefore, the overall list of applications for this particular keystone module is very wide. RJ45 socket has an IDC connector cover and a 568A / B colored connection sequence designation.
