"SWISSTENi tekstiilist Lightning / 3,5 mm Jack audioadapter musta värvi ja 1,5 m pikkune on ideaalne lahendus. Selle adapteriga on lihtne ühendada 3,5 mm pistikuga kõrvaklapid või kõlarid Lightning-pistmikuga seadmetega, mida hindavad kõrgelt Apple'i seadmete kasutajad.Kaabel on vastupidavast tekstiilist kootud, mis kaitseb kulumise eest, tagades pika kasutusaja ja usaldusväärse heliülekande. 1,5 m pikkune kaabel on piisavalt paindlik nii kodus kui ka teel olles.Adapteri eelisedÜhildub Apple'i seadmetega, millel on Lightning pesa.Vastupidav tekstiilpind tagab pika eluea.1,5 m pikkus tagab paindliku kasutamise.Usaldusväärne heliülekanne ilma häireteta.Ei toeta kõne ajal kõne edastamist.
To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 4 x Gigabit Auto-MDIX PoE / PoE+ ports 4 x Gigabit Auto-MDIX ports Provides up to 30 watts for PoE+ (2 ports max.) Provides up to 15.4 watts for PoE (4 ports max.) Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
QuSpot for Teltonika RUTX11 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + Bluetooth antenna + place to install Teltonika RUTX11 (All-in-one) QuSpot omni LTE antenna for Teltonika RUTX11 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It also has embedded Wi-Fi dualband 2.4 & 5 GHz omni antenna, GPS antenna and Bluetooth antenna. If you use RUTX11 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
Description This DIN rail by Delock can be used to mounting different electronic devices and components. Multifunctional application The DIN rail can be mounted in a control cabinet and is used as a mounting system, e.g. for power supplies, screw terminals and interface modules. Simple mounting option To allow easy installation, the DIN rail is provided with slot holes. Specification • Mounting hole: 15.0 x 6.2 mm • Material: steel • Dimensions (LxWxH): ca. 500.0 x 35,0 x 7,5 mm Package content • 1 x DIN rail • 2 x end cover
Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
The certified LogiLink Cat.6A patch cable is ideal for data transfers 10 Gigabit Ethernet and transfer frequencies 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs, the overall shield is made of copper braid. The shielded RJ45 plugs come with an overmolded slim strain relief and snagless design.
PoE switch 16-port + 4 combo ports RJ45/SFP Dahua PFS3218-16ET-135 The Dahua PFS3218-16ET-135 16-port PoE Switch + 4 RJ45/SFP combo ports is a cost-effective Layer 2 PoE switch that has been developed for IP surveillance systems. The PFS3218-16ET-135 is equipped with 16 RJ45 10/100Mbps ports with PoE 802.3af/at (power over ethernet) support and 2 RJ45 Uplink 1 Gbps shared (Combo) ports with 2 SFP insert ports. The total PoE power budget for connected devices is 135W. The device supports IEEE 802.3af, IEEE 802.3at and Hi-PoE standards (first 2 ports). The Dahua PFS3218-16ET-135 PoE switch is equipped with features such as PoE Watchdog, port isolation capability, QoS for VIP ports and support for long-distance 250m mode. It uses 16 PoE ports that allow the target device to be powered with a power consumption not exceeding 30W (the exception being the first 2 ports with Hi-PoE support, which can supply up to 60W). The switch uses intelligent PoE ports, which continuously regulate power consumption in the event of an overload. If all powered devices exceed 135W, the switch will automatically disconnect the lowest priority communication port. Features PFS3218-16ET-135: Intelligent PoE PD Alive (PoE Watchdog) PoE transmission over long distances Smooth transmission Wide operating temperature: 10 to 55 ° C (14 ° F to 131 ° F) Port isolation