K&F Concept ND&PL filter set (8/16/32/64) for DJI Osmo Action 4.Find out that creating professional footage doesn't have to be a difficult task. This set of 4 ND & PL filters is designed for the DJI Osmo Action 4. The accessories slow down the shutter speed and reduce reflections. At the same time, they are lightweight and you won't have any difficulties installing them.New creative possibilitiesAt your disposal will be ND8&P, ND16&PL, ND32&PL and ND64&PL filters, which slow down the shutter speed by 3/4/5/6 f, making it easier to achieve a blur effect. They also reduce exposure without chromatic aberration, positively affecting the sharpness of shots. This makes them perfect for everyday recordings.Robust constructionThe filters are made of durable Japanese AGC glass, which is distinguished by a 28-layer nano coating, known for reducing reflections. At the same time, the accessories are durable, waterproof and lightweight - weighing just 0.5g. They are also not susceptible to scratches, mold and oils. So you can be sure that they will reliably accompany you during any creative attempt.Ease of installationThe accessories are perfectly matched to the DJI Osmo Action 4, and installation is smooth and hassle-free. So you can quickly get ready for your next recording session! ManufacturerK&F ConceptModelSKU.2077CompatibilityDJI Osmo Action 4Weight0,5 g
Main Features Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector Provides 1 x 100 Mbps single-mode fiber optic port Provides internal jumper for Link Fault Pass-through (LFP) setting Supports full/half duplex flow control Supports store and forward transmission Supports auto-negotiation Supports MDI/MDI-X auto crossover Supports redundant +12-48 VDC power input Provides flexible mounting: DIN-rail & Panel Mounting Supports Operating Temperature from -10 ~ 60° C Datasheet
The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Introducing the Ubiquiti LiteAP AC airMAX (LAP-GPS), the latest high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LAP-GPS was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these access points operates in the worldwide, licence-free 5 GHz frequency range with high-performance speeds. The LAP-GPS combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range, with cost-effective value.Key FeaturesPart of the Ubiquiti LiteAP AC rangeIncludes Pole Mounting KitRevolutionary Operating SystemAccess Point PtMP airMAX Mixed ModeairMAX AC Protocol SupportLong-Range Point-to-Point (PtP) Link ModeSelectable Channel WidthPtP: 10/20/30/40/50/60/80 MHzPtMP: 10/20/30/40 MHzAutomatic Channel SelectionTransmit Power Control: Automatic/ManualAutomatic Distance Selection (ACK Timing)Strongest WPA2 SecurityairMagic Channel Selection ToolDynamic Configuration ChangesInstant Input ValidationHardware OverviewThe LAP-GPS delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor.GPS Sync SupportThe LAP-GPS supports GPS Sync for faster, more scalable, carrier-class networks. Precise GPS frame synchronisation enables co-located LAP-GPS devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability. In a cost-effective WISP deployment, the LAP-GPS is used as an Access Point in an airMAX AC Point-to-MultiPoint network.
GNSS Antenna Frequency Range: 1575.42-1610 MHz Polarization RHCP Impedance 50 Ω LNA Gain 28 dB LNA Noise Figure < 1.5 dB Supply Voltage 2.7-5 ±0.5 VDC Current Consumption < 15 mA LNA V.S.W.R
See Delocki pime kate sobib paigaldamiseks 19″ võrgukappi. See sulgeb võrgukapi avatud alad. Spetsifikatsioon Paigaldamiseks 19″ võrgukappi, 2U Värv: must Materjal: metall Mõõtmed (LxSxK): ca. 482,0 x 88,5 x 11,5 mm. Pakendi sisu 19″ pimenduskate 4 x kruvi 4 x kinnitusmutrid
Seda koaksiaalkaablit kasutatakse 5 V toitepinge toitmiseks, et kasutada näiteks aktiivset DVB-T/DVB-T2 antenni. See pinge toimub tavaliselt antennikaabli kaudu. Mõned teleriseadmed ei paku 5 V toitepingeid antennisisendi kaudu. Sellistel juhtudel toidetakse aktiivantenne eelnevalt tavalisest toiteallikast pingega. Delocki antennikaabli kasutamine 5 V fantoomtoitega võimaldab otsest toiteallikat TV-seadme USB-pordi kaudu. Tänu kaabli olemasolevale USB A-tüüpi pistikupesale, mis kannab signaale ja pinget, saab seda USB-ühendust jätkuvalt kasutada. Spetsifikatsioon Ühendus: F-pesa > F-pistik USB Type-A pistik, USB Type-A pesa Kaabli värvus: must Kaabli pikkus: ca 22 cm USB-kaabli pikkus: ca 35 cm Süsteeminõuded Vaba F-liidesega seade Pakendi sisu Antennikaabel
