Habotest HT609PRO Gas Leak DetectorThe Habotest HT609PRO sensor will provide you with fast and accurate leak detection. Among other things, the device recognizes methane, propane, butane, carbon monoxide, ammonia, acetylene, acetone, benzene, hydrogen, ethanol, kerosene, solvent and many others, allowing you to effectively monitor safety at home, work, workshop or laboratory. It also allows accurate measurement of gas concentration in PPM units. A color LCD display with an intuitive bar graph, a 1.5-meter telescopic probe and a dual alarm system (sound and light) make operation easy.Precise detectionThe device detects all LEL (Lower Explosive Limit) gases, i.e. substances that can become explosive when they exceed a certain concentration in the air. Thanks to its wide detection range (50-1000 PPM) and fast response time (2-5 seconds), the Habotest HT609PRO sensor allows immediate detection of danger.Telescopic probeThanks to its flexible 1.5-meter-long probe, the sensor allows you to check hard-to-reach areas without using a ladder or dismantling the installation. The Habotest HT609PRO is ideal for inspecting gas installations in buildings and LPG systems in vehicles, ensuring convenience and safety of use.Sensitivity adjustmentThe detector offers a three-stage sensitivity adjustment, so you can adapt its performance to your environment. The high sensitivity mode detects already minimal amounts of gas, while the low sensitivity mode eliminates interference in environments with higher gas concentrations. An audible alarm sounds depending on the sensitivity setting - from the second to the eighth bar of the chart.Safety and convenienceThe Habotest HT609PRO warns of gas detection with an audible and light signal. The color LCD screen displays measurements in an easy-to-read graphical form, allowing easy interpretation of the results. A low battery indicator reminds you to replace the battery. You'll power the device with 3 AAA batteries, which are included in the package.Durable designThanks to its compact and ergonomic design, the sensor fits perfectly in your hand. It is made of durable materials to ensure resistance to damage and wear. The automatic shut-off function after 5 minutes of inactivity extends the device's working time.Included:Habotest HT609PRO gas leak detectorProtective bag for storageAAA battery x3User manual ManufacturerHabotestManufacturer codeHT609PRORangeapproximately 50 ~ 1000ppm (methane)Sensitivity> 50 PPM (methane)Extendable probeYes, 1.5mTest gases (partial list)Acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, gasoline, kerosene, natural gas, paint thinners, propane, solvents, etc.Start-up timeapproximately 30 secondsResponse time500ppm: approx. 2sAlarm modeAudible and lightAutomatic power offyesPower supply3 x 1.5V AAA batteryWorking temperature0 to 50°CWorking humidity20 to 80%Storage temperature-10 to 60°CStorage humidity20 to 80%
TRENDneti TK-C15 15-jalasel KVM kaablil on kõik pistikud, mida vajad klaviatuuri, monitori ja hiire ühendamiseks ning võimaldab sul viia kõik need seadmed KVM switchist, süle- või lauaarvutist kuni 15 jala kaugusele. Koos TRENDneti TK-200 2 pordiga, TK-400 4 pordiga ja TK-801R 8 pordiga KVM switchiga oled teinud parima valiku mitme PC haldamiseks vaid ühe klaviatuuri, monitori ja hiire abil.Pikkus: 4,5 m, Kõrgekvaliteediline KVM kaabel (UL2919 VGA monitori jaoks).Klaviatuur & hiir: PS/2 tüüpi 6 pi
The quickMOUNT pro LHG is a advanced wall or pole mount adapter for Mikrotik LHG antennas.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT prois possible to perfectly set antenna alignment using integrated graduated scale.
TRENDneti 16 pordiga 10/100/1000 switch. 3 aastat garantiid. Vastupidava metallist korpusega. Kasutab GREENneti energiasäästlikku tehnoloogiat.
TRENDnet’s Industrial SFP to Gigabit PoE+ Media Converter, model TI-PF11SFP, converts fiber to copper while providing power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones, and wireless access points. The hardened IP30 rated housing is suitable for extreme industrial environments. Dual redundant power inputs (power supply sold separately: TI-S12048) with overload current protection minimizes downtime. Industrial Applications Networks devices for manufacturing, general industrial, warehousing, surveillance, and corporate applications. PoE+ Output Converts fiber to copper while providing power to PoE and PoE+ compliant devices such as IP cameras, VoIP phones, and wireless access points. Extreme Environments Hardened IP30 converter, with a -40 to 75 ºC (-40 to 167 ºF) operating temperature range. Network Ports 1 x Gigabit PoE+ Ethernet port and 1 x SFP slot DIN-Rail/Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardware Switching Capacity 2Gbps switching capacity Redundant Power Dual redundant power inputs with overload current protection (power supply sold separately: model TI-S12048) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance Extreme Temperatures Hardened converter is rated for a wide operating temperature range of -40 to 75 °C (-40 to 167 °F) Electromagnetic Compliance Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards Certifications Rated for information technology (ITE) equipment (EN55022/24) and industrial, scientific, and medical (ISM) Equipment (EN55011) Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 24 V DC, 57 V DC väljundpinge: 24 V DC, 57 V DC Lisaandmed: 12 ports 100Mbps
QuMax for Teltonika RUT240/230 Integrated outdoor multi band high power LTE directional antenna + outdoor Wi-Fi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240 or RUT230 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It also has embedded outdoor Wi-Fi omni antennas. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
8 x Gigabit ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Wide operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (model: TI-M6024) TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. Integration Flexibility Managed layer 2 features include VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Shock and Vibration Resistant The industrial layer 2 managed switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6). Industrial Design Equipped with an IP30 rated metal enclosure, the industrial layer 2 managed switch operates within a wide temperature range of -40° – 75° C (-40° – 167° F). Network Ports Gigabit ports for high-speed network connectivity and SFP slots for long distance fiber applications Traffic Management Layer 2 Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping, and IP Source Guard provide the industrial layer 2 managed switches with layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure, includes DIN-rail mounting bracket for the industrial layer 2 managed switch Redundant Power Redundant power inputs with overload current protection (power supply sold separately) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power to the industrial layer 2 managed switch Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance from the industrial layer 2 managed switch Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges on the industrial layer 2 managed switch
QuMAX eXtra Range All In offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It also has embedded Wi-Fi dual band 2.4 & 5 GHz omni antennas GPS antenna and Bluetooth antenna. It is designed to have Teltonika RUT240/950/955/X09/X11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. There is also space for mounting internal genuine Teltonika GPS and Wi-Fi antennas inside the antenna enclosure.
