Intel Ethernet800 Series improve application efficiency and network performance with innovative and versatile capabilities that optimize high-performance server workloads such as NFV, storage, HPC-AI, and hybrid cloud. With two 25GbE SFP28 ports and key performance optimizations, the E810-XXVDA2 supports solutions across Cloud, Enterprise, and Communications. Performance optimizations for Cloud, Enterprise, and Storage deployments. Application Device Queues (ADQ) provides dedicated traffic queues to reduce latency and increase application throughput. Dynamic Device Personalization enables protocol- specific traffic acceleration to improve packet processing efficiency and reduce CPU overhead. iWARP and RoCEv2 support provides high-speed, low-latency, high-throughput connectivity for storage targets and initiators. Accelerated packet processing for Communications workloads. Enhanced Data Plane Development Kit (DPDK)support increases packet processing speeds. Dynamic Device Personalization enables protocol- specific traffic acceleration and reduces CPU overhead for emerging high-bandwidth workloads. IEEE 1588 PTP v2 support enables precise clock synchronization across 5G RAN deployments. Flexible configurations. Intel Ethernet Optics, and specification-compliant Active Optical Cables and Direct Attach Cables, can support multiple configurations.
The TEG-MGBS80 Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. This Single Mode LC Type module spans distances up to 80km (49.7miles) and includes 1 x 1000Mbps-LX (LC-Type) Mini-GBIC connector.Kaabeldustehnoloogia1000Mbps-LXMaksimaalne ülekandekaugus80000 mLainepikkus1550 nmVastavus harustandarditeleIEEE 802.3zPistmik(ud)LC
To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
High power 2192-2732MHz 802.11b/g/n dual chain wireless card in miniPCI-e format. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapter card - RB14e. The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
CA411-711 is new indoor case for RB411 and RB711 series. It has changeable front panels, so you can choose one that fits the product that you actually use. Also, case is higher to accommodate high-power wireless cards and has wall mounting holes on the back.
The new DIGITUS® Category 6A U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6A, because of the new yellow colored connector.Kaabli pikkus5 mKaablistandardCat6aPistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Kaabli klassEaSuguMale/MalePistmikukontaktide kateKuldKaabli värvHallSisendi näivtakistus230 ΩMantli materjalMadala suitsu null halogeen (LSZH)AWG-juhtme läbimõõt26/7Sagedus500 MHzÜhendusklemmi kaitseEiSertifikaatIEC 60332-1, IEC 61034Kasutamistemperatuur (T-T)-20 - 60 °CVäline läbimõõt5 mmKogus pakendi kohta1
6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch TI-PG541i (Version v1.0R) Hardened IP30 rated metal enclosure with integrated DIN-Rail mount Wide operating temperature range - 40 to 70 °C (-40 to 158 °F) 4 x Gigabit PoE+ (802.3at) ports, 1 x Gigabit port, and 1 x Gigabit SFP slot 120 Watts total power budget Dual redundant power inputs and alarm relay output CLI (Telnet), Web (HTTP), SNMP v1/2c management 802.1Q/MAC-Based VLAN and IGMP Snooping support 802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR) QoS support Power supply sold separately (models: 48VDC3000 / TI-S24048 / TI-S12048) TRENDnet’s 6-Port Hardened Industrial Gigabit PoE+ Layer 2 Managed DIN-Rail Switch, model TI-PG541i, has four Gigabit PoE+ ports, one Gigabit port, one Gigabit SFP slot and a 120 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate within a wide temperature range (- 40 – 70 °C (- 40 - 158 °F)) for harsh environments. L2 management include features such as PoE port control, VLAN, multicast, and QoS which allow for network integration flexibility. Industrial Hardened Design Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 70 °C (- 40 - 158 °F)) for harsh environments. Integration Flexibility Managed features include PoE per port control/priority/scheduling/power delay, 802.1Q/MAC-based VLAN, IGMP snooping, per port bandwidth control/802.1p/DSCP/queue scheduling, and SNMP trap/RMON/SMTP alert/syslog/port mirror for monitoring and flexible network integration. Fault Tolerance Features dual redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure Full PoE+ Power Budget Supplies up to 30 Watts of PoE/PoE+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt PoE power budget Network Ports and Capacity 4 x Gigabit PoE+ ports, 1 x Gigabit Port, and 1 x Gigabit SFP slot allow for a 12Gbps switching capacity Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Full PoE Control Per Port PoE control features include enabling/disabling PoE and class, power priority, PD alive check, scheduling, and power delay per port using CLI or web management. L2 Management Managed features include 802.1Q, /MAC-Based VLAN, IGMP v1/2/3 Snooping, per port bandwidth control/802.1p/DSCP/Queue Scheduling (SP/WFQ/WRR), and Storm Control for flexible network integration. System Monitoring Monitoring features include SNMPv1/v2c, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, and port mirroring. Redundant Power Dual redundant power inputs (primary and RPS) with overload current protection Alarm Output Alarm relay output triggered by power failure of primary and/or redundant power (DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10K) Wide Temperature Hardened switch is rated for an operating temperature range of - 40 to 70 °C (-40 to 158 °F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock and Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, PoE, and network port status Grounding Point Grounding point protects equipment from external electrical surges
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
