HG3-CC-S8080° Symmetrical Horn CC Antennas Gen2 Game Changing Sector AntennaSymmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes equipped with N-female connectors. Since 2014 our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection network scalability and throughput improvement.Approved by tens of thousands of installations all around the globe RF elements Symmetrical Horn Carrier Class Antennas are the new standard for fast and sustainable wireless. Unique Beam PerformanceSymmetrical Horn CC Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical. No Side LobesSymmetrical Horn CC Antennas have no side lobes they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently being basically "deaf" outside their main beam. Wideband PerformanceThe radiation pattern of Symmetrical Horn CC Gen2 is frequency independent and its gain is stable over the whole bandwidth of operation. These features make Symmetrical Horn CC Gen2 excellent sector antennas. Excellent Gain Across SpectrumSymmetrical Horn CC Gen2 Antenna covers ultra-wide bandwidth: 5180-6400 MHz! At the same time gain is stable over the whole band. Coverage Without NullMainstream sector antennas have a radiation pattern that is wide in azimuth but flat in elevation plane. If an AP is too high customers that are positioned too close will suffer from low AP signal. Breakthrough ScalabilitySymmetrical Horn CC Gen2 facilitates breakthrough scalability of wireless networks. Unique beam performance and great co-location characteristics allow for higher density sectors compared to traditional sector technology.Symmetrical Horn CC Gen2 features precise main beam widths spanning from 30 to 90 degrees: a range of models suitable for any situation. Ultimate Spectrum Efficiency For EveryoneSymmetrical Horn CC Gen2 antenna supports dense co-location of narrow sectors with excellent isolation. It unlocks the RF performance not possible before. This is an advantage horns have irrespective of radio platform used. N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors used with wide range of Radios. For example mimosaTM Cambium NetworksTM PMP450 LigoWaveTM and many others. Users of UBNTTM Rocket M5 Titanium MikroTikTM connectorized radios (NetBoxTM BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas. Compact SizeSymmetrical Horn CC Gen2 Antenna is compact with only 20-25% footprint of traditional sector antennas. Compact size saves tower rental fees and makes it possible to install Symmetrical Horn CC Gen2 Antenna where regular sectors would not be allowed due to their shape and size. Robust and DurableSymmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast stamped and extruded aluminium; high quality ABS plastic high density polyethylene; and stainless steel hardware.
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Spetsifikatsioon - Liitmikud: 1 x 9-pin D-Sub-istmik 1 x 10-pin klemmiplokk - Pitch: 3,81 mm Pakendi sisu - Adapter
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Spetsifikatsioon - Liitmikud: 1 x 25-pin D-Sub-liides: 1 x 25-pin D-Sub-liides 1 x 27-pin klemmiplokk - 3 x 9-pin klemmiplokk (25 pini ühendatud) - Pitch: 3,81 mm - Mutritega emasport - Mõõtmed (LxSxK): ca. 54,20 x 53,04 x 16,05 mm Pakendi sisu - Adapter
Seda Delocki soliidset tööstusvõimelist USB-keskust saab ühendada arvutiga USB Type-A-liidese kaudu. See laiendab arvutit nelja A-tüüpi USB-liitmikuga, mis toetab USB-akulaadimise spetsifikatsiooni BC1.2. Seega saab ühendatud seadmeid, näiteks nutitelefone, kiiremini laadida. Vajaduse korral saab toitepistikupessa ühendada lisatoiteploki või lisatoitekaabli. Spetsifikatsioon - Pistikud: 1 x USB 3.0 Type-B emane > 4 x USB 3.0 Type-A female - akulaadimise spetsifikatsioon BC1.2 1 x 9 - 40 V alalisvoolu pesa 1 x 3-pooluseline toitepistik - Kiibistik: VIA VL811+ - Andmeedastuskiirus kuni: SuperSpeed USB 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s - 5 x LED-indikaator - Kruviaukudega USB-pordid - Vastupidav metallist korpus - Eemaldatavad seinakinnitused - Toiteallikas: Bussitoitega või isetoitega - Paindlik toiteallikas 9 V kuni 40 V - Toitepistikute sisendpooluse automaatne tuvastamine - ESD-kaitse kuni 15 kV kõigi portide puhul - Mõõtmed (LxSxK): ca. 158 x 80 x 32 mm - Värv: must - Plug & Play Toitepistiku spetsifikatsioon - 9 - 40 V - Mõõdud: ø ca. 2,1 mm väliskülg: ø ca. 5,5 mm pikkus: ca. 9 mm Süsteeminõuded - Windows 7/7-64/8.1/8.1-64/10/10-64, ex Linux Kernel 3.16.x, ex Mac OS 10.9 - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB pesa - 1 x USB-A-istmiku ja USB-B-istmiku vaheline kaabel, pikkus ca 1 m - 2 x seinakinnitusklambrid - 1 x DIN-riba paigaldus: 35 mm - 1 x 3-poolne klemmiplokk - Kasutusjuhend
Gigabit PoE Splitter, Compliant with IEEE 802.3af/802.3at PoE standards, 2 10/100/1000 Base-T Gigabit Ethernet Ports, Intup voltage: 54V DC (PoE), Output voltage: 5V/9V/12V DC, Output power: up to 30W, Designed to deliver both data and electrical power to FE or GE devices without PoE support using the Cat5 Ethernat cable (such as Wireless Access Points, Network Camera, VoIP Phone and etc.)
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. - 24 unshielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 8 tk Toetatud protokollid ja standardid: PoE - Power over Ethernet võrgukiht: 2 arvutikorpuse tüüp: metal maksimaalne energiatarbimine: 60 vatti Standard tarvikud: toiteplokk Lisaandmed: väljund pinge värv: must andmeleht: Vendor Page