5-Port Unmanaged Desktop Switch with 5-Port 2.5G >5 × RJ-45 10/100/1000/2500 Mbps ports. >Easy to install, and is plug and play. >With its solid full metal design, the device has great heat dissipation and no fan. >Green Ethernet (802.3az).
S3016-16GT 16-Port Unmanaged Gigabit Switch> 16 × RJ-45 10/100/1000 ports. > The all-gigabit ports transmit data without lag. > Features aggregation mode which aggregates uplink ports. > Features isolation mode which isolates all the ports from each other. > With its solid full metal design, the device has great heat dissipation and no fan. > Supports rack mount, wall mount and desktop mount.
Highly intuitive, the Smart Managed Switch can manage local networks. With the DoLynk Care platform, it can also perform cloud management. The switch performs operation and maintenance using topology visualization on front-end, transmission and back-end storage devices that are in the security system and IT system. With its full metal design, the switch has great heat dissipation and can operate in temperatures ranging -10°C to 55°C. It offers EMC and has protection against overvoltage, overcurrent, static electricity, lightning strikes, pulses and other types of interference. For the PoE series Smart Managed Switch, power is supplied up to 250 meters away. The orange port supplies up to 60 W and the red port provides up to 90 W. Also, link aggregation and STP are available on select models to ensure the network remains stable. The switch can be used in small and medium-sized businesses such as supermarkets, offices, restaurants, cafés and hotels. Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof
Extender switch PoE DIN-FE4-AT-30W LanbergPoE extender (often referred to as a PoE repeater or "amplifier") is a practical component in installations where we need to run devices far from the telecommunications cabinet, and the classic 100 m limitation on Ethernet and PoE power becomes a barrier. Such a PoE switch acts as an active splitter: it regenerates the signal and transmits PoE power further, allowing you to safely "extend" power and transmission to subsequent points in the LAN without an additional power supply in the field and without having to deal with intermediate power sockets.Key features of DIN-FE4-AT-30W that really help installers and LAN administrators 4-port RJ45 layout: 1x input port + 3 PoE output ports (ideal when you need to add a "branch" to the installation). PWR and Link/Act LED indicators on ports quick diagnostics and field service. Extension of LAN and PoE power by another 100 m on a single UTP twisted pair (i.e., still "one cable"). DIN mounting on a TS-35 rail with a metal clip convenient, secure, and "rack-mounted." Extend the range of PoE power and network signal in your LAN by 100 mThis is the most common scenario: surveillance cameras, access controllers, alarm components, Wi-Fi/access points, and other PoE-powered network devices are "too far" from the main network switch in the rack. Instead of installing a 230 V power supply along the way, you insert a PoE extender into the path.The DIN-FE4-AT-30W works in a simple, practical way: it receives data and PoE power at the PoE input, and then provides a fresh Ethernet signal and PoE at the outputs - meaning you can effectively extend the range of your installation by another 100 m. This is a great solution when you need to run several PoE receivers, e.g., several cameras in a hall, parking lot, or long corridor, and the power supply and transmission are to go through a single UTP cable.4-port PoE extender switch with cascading capabilityIn practice, you gain the most when the extender works not only as a single module, but also in a serial arrangement. Both models can operate as an extender in a single configuration and in a cascaded connection.How does this work in the field? You connect the first extender (PoE IN) to the PoE switch, and then you can add another and another - up to 3 devices in series (i.e., a 3-level/three-level cascade). Each extender "adds" another 100 m, so you gain a maximum of +300 m in relation to the nominal range. At each stage, apart from the next extender, there is room for an additional network branch: you can connect 2 cameras or other peripherals (e.g., an IP sensor, a small AP) - that is, exactly when you have points "along the way" that you want to power with PoE. This is convenient when you are expanding your LAN in stages and want your infrastructure to be flexible and easy to maintain.Advanced PoE extender ready for any taskThe DIN-FE4-AT-30W is a compact Layer 2 switch that makes life easier in PoE installations thanks to proven transmission mechanisms: Automatic MDI/MDI-X - the ports select the pairing method themselves, so you don't have to worry about the type of cable (patch cord/crossover). Flow control (IEEE 802.3x) - flow control reduces losses and overloads during peak traffic. MAC auto-learning + 2K MAC table - automatic address learning speeds up operation and stabilizes switching in small LAN segments. The DIN-FE4-AT-30W version supports IEEE 802.3i (10Base-T) and IEEE 802.3u (100Base-TX) wired standards and PoE+ compliant with 802.3af and 802.3at. This is an important distinction, because in installations you will also encounter passive PoE solutions here we are talking about standard, negotiated PoE. At the same time, the device has passive cooling (no fan) and very low power consumption approx. 1.6 W, so it is suitable for continuous operation.Robust, durable housing and convenient mounting on a TS-35 DIN rail with a metal clipIn industrial and technical installations, it is not only the PoE function that counts, but also the installation. That is why the housing and metal clip for the TS-35 DIN rail are more than just a detail: they save time and keep the switchboard tidy.Advantages of DIN rail mounting for the installer/administrator: Quick and easy installation (snap-on) Space saving Easy modification and maintenance Versatility and standardization Neat cabling Durability and safety Cost reduction If your LAN infrastructure has areas where the network needs to be extended beyond the standard 100 m, and you also have PoE-powered devices (e.g., IP cameras and other devices, access points, etc.), the DIN-FE4-AT-30W is designed as an extender for such tasks. Choose the model according to your power requirements: PoE+ for typical peripherals or PoE++ where you need a larger PoE budget and gigabit transmission.
5G WiFi-ruuter Nebula FWA505v2 on 5G AX3000 siseruuter, mis on loodud pakkuma mobiilset lairibaühendust ja kahe sagedusala WiFi-t ühe kompaktse seadme kaudu. See ühendab 5G NR-ühenduvuse WiFi 6-ühendusega, võimaldades kasutajatel ühenduda nii traadita juurdepääsu kaudu kui ka gigabit-Etherneti liideste kaudu. Ruuter toetab teoreetilist 5G allalaadimiskiirust kuni 4,67 Gbps ja AX3000 WiFi 6 ühenduskiirust kuni 3000 Mbps, mis võimaldab tal võrgukeskkonna lubamisel teenindada ka nõudlikku igapäevast liiklust. Tänu samaaegsele 2,4 GHz ja 5 GHz WiFi-le saab see jagada ühendust kuni 64 WiFi-toega seadmega, toetades ühe siseruuteri abil segaklientide keskkondi. Neli sisseehitatud isotroopset 5G/4G antenni aitavad ruuteril vastu võtta signaali erinevatest suundadest, toetades praktilisi paigutusvõimalusi siseruumides, kus signaaliolud võivad varieeruda. Mobiilside liides toetab nii 5G SA- kui ka NSA-režiime, samuti 4G LTE-d, mis annab seadmele paindlikkuse kõigi kättesaadavate mobiilsidevõrkude kasutamisel. Rakenduste ülevaade näitab kasutust väikeste ja keskmise suurusega ettevõtete, jaekaubanduse ja kodukeskkondades, kus ruuter saab ühendada traadita kliente otse ning pakkuda ka traadiga juurdepääsu seadmetele või lülitile. LAN2-porti saab konfigureerida ka Etherneti WAN-portina, võimaldades vajadusel WAN-liideste vahelist varundust. Kaugjuhtimine FWA505v2 on loodud kiireks kasutuselevõtuks ilma keerulise kaabelduseta. 4FF Nano SIM-kaardi pesa võimaldab mobiilside ühenduse loomist SIM-kaardi sisestamisega, samas kui Nebula mobiilirakendus juhendab kasutajaid seadistamisel samm-sammult. Sama rakendus võimaldab mobiilseadme kaudu juurdepääsu seadme seadistustele, jõudluse jälgimisele ja võrguhaldusele, aidates paigaldajatel või asukoha omanikel ühenduse võrku viia ilma spetsiaalse kontrollerita. LED-indikaatorid näitavad toite ja süsteemi seisundit, WAN-i või interneti seisundit, mobiilsignaali tugevust ning WiFi või WPS-i seisundit, mis võimaldab seadme seisundit ühe pilguga hõlpsasti kontrollida. Nebula pilvehaldus laiendab ruuteri funktsioone kohalikust seadistamisest kaugemale, toetades ühelt platvormilt traadita võrkude, lülitusseadmete, turvalisuse ja fikseeritud traadita juurdepääsuseadmete tsentraliseeritud juhtimist. See võimaldab registreerimist, konfigureerimist, seiret, juhtpaneeli vaateid, asukohakaardi ja põrandaplaani visualiseerimist ning püsivara juhtimist üle õhu. Sõltuvalt valitud Nebula paketist võivad lisafunktsioonid hõlmata täiustatud püsivara ajastamist, automaatset võrgutopoloogiat, e-posti kasutajaid ja hoiatusteateid, organisatsioonilisi auditeerimisloge, konfiguratsiooni varundamist ja taastamist ning prioriteetset Nebula tuge. See muudab ruuteri praktiliseks mitte ainult ühe väikese asukoha jaoks, vaid ka keskkondades, kus on vaja kaugjälgimist, skaleeritavat kasutuselevõttu ja lihtsustatud jätkuvat haldamist. Võrgukaitse Ruuter sisaldab mitmekihilist võrgukaitset ja juurdepääsukontrolli funktsioone, et tagada stabiilne ja hõlpsasti hallatav ühendus asukohaga. Selle tulemüüri saab graafilise liidese kaudu sisse või välja lülitada ning see toetab SPI-liikluse kontrolli, DoS-rünnakute tuvastamist ja LAN-WAN-vahelist rakendustasandi filtreerimist selliste teenuste jaoks nagu HTTP, Telnet ja Ping. MAC-aadresside, IP-aadresside ja URL-ide filtreerimine võimaldab administraatoritel määratleda üksikasjalikumaid juurdepääsukontrolli reegleid. VPN-läbiviimise tugi protokollidele PPTP, IPSec ja L2TP aitab kasutajatel säilitada turvalise tunneli ühilduvust, ilma et ruuterit oleks vaja määrata VPN-lõpppunktiks. Võrgukonfiguratsiooni osas toetab FWA505v2 IPv4/IPv6 kahekihilist pinu ja ainult IPv6-põhist tööd, DHCP-kliendi ja -serveri funktsioone, NAT-i ja NAPT-i, portide edastamist, DMZ-i, silla- või ruuterirežiimi, dünaamilist DNS-i esimesele APN-ile ning staatilist või dünaamilist marsruutimist. WLAN-funktsioonide hulka kuuluvad mitu SSID-d, peidetud SSID, WPS, WMM QoS, kanali valik, WLAN-ajastamine, sagedusriba juhtimine ja EasyMesh R2-vastavus. Seade töötab alalisvooluadapteri abil, selle maksimaalne võimsustarbimine on alla 15 W ning see on mõeldud kasutamiseks siseruumides temperatuurivahemikus -10 °C kuni 40 °C. Korpuses on kasutatud 95% ulatuses ringlussevõetud plastikut, pakend sisaldab toiteadapterit, Ethernet-kaablit, QR-koodiga kasutajajuhendit ja ohutushoiatusi esmakordseks paigaldamiseks.
The D-Link AX3000 Wi-Fi 6 Mesh Range Extender E30 extends the range of your home network and ensures fast, stable connections throughout the home. As part of the AQUILA PRO AI Mesh system, it uses modern Wi-Fi 6 technology for faster speeds, greater capacity and improved coverage. Intelligent, AI-powered features automatically optimize the network and adjust performance based on your usage. This creates reliable, seamless WiFi coverage for smart home devices, streaming, gaming and home office in every room. Repeater type Color white EAN 0790069473951 Manufacturer no. E30/E Socket design Connections network speed WAN / Internet RJ-45 WAN connections WLAN standards Wi-Fi 3 (802.11a), Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) - (2.4 GHz, 5 GHz) WLAN encryption WPA-PSK, WPA2-PSK, WPA3-PSK WLAN transfer rate 574 MBit/s (WLAN 2.4 GHz), 2403 MBit/s (WLAN 5 GHz) Reset, WPS control buttons Power supply power consumption operation: 9.41 W Further information AQUILA PRO AI app, Web UI Management Accessories available Ethernet cable, quick start guide Dimensions Width: 71.2mm x Height: 74.5mm x Depth/Length: 63mm Weight 208 grams
The TL-SF1016DS Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016DS can save up to 25%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 16 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
As USB 3.0 devices are getting popular, the demand for extending the distance covered by USB devices is growing notably. ATEN’s UE350A USB 3.0 Extender Cable not only extends the distance for the USB devices up to 5 meters, but also delivers a throughput of up to 5 Gbps when used in conjunction with a USB 3.0 host and device – an astounding increase that is ten times the capability of USB 2.0.In addition to its robust speed and transfer rate, the UE350A also provides a durable, high quality connection that harnesses the full capability of the USB 3.0 standard; at the same time, it is backwards compatible with USB 2.0 and 1.1 to ensure reliable data communication. With UE350A, extending the distance of your USB 3.0 device is quick and easy, making it an ideal addition to your USB system setups.TypeExternal YesPortfrom von: USB 3.0 Socketto auf: USB 3.0 plugLength 5 m
Original part number CS22U-A7 Product name ATEN CS22U 2-Port USB KVM Switch, Remote port selector, 0.9m cables Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, DSub-15 Local console's ports 1 x (USB, D-Sub-15) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 2048 x 1536 pixels Active port selection pushbutton Possibility of joining into cascade No Switching audio signal (microphone/speakers) No Functions (additional) auto scanning allows easy monitoring of attached computers Standard accessory KVM cable 1.8m for PC with USB, USB, D-Sub-15 conectors - 2pcs Width 82 mm Height 25 mm Depth 77 mm Net weight 310 g Additional information integrated cablesNo power supply neededsupport for multifunction keybords and mousessupport for Win, MAC, Linux and Sun Datasheet Datasheet More info More info
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s25-9631654MBit/s20-80100MCS025-96316MCS719-7579
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
