The RB450Gx4 is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD card slot. In addition, it supports full 10 V - 57 V input by two power jacks or PoE (802.3af/ at or passive PoE) and can provide PoE output for Ethernet port #5. It is powered by MikroTik RouterOS. It comes without an enclosure, you are free to use it in your own. The device form factor is identical to our previous RB850 and RB450 series, so you can even use the same enclosures. The device is powered by a quad core ARM CPU, has 1 GB of RAM and supports hardware IPsec encryption. The device is powered by RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RB450Gx4IPQ-4019 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162,51973.4469,91924.71482,6759.1Bridging25 bridge filter rules162,51973.4339,41390.2344176.1Routingnone (fast path)162,51973.4469,91924.71452,6743.7Routing25 simple queues162,51973.4468,31918.2473,8242.6Routing25 ip filter rules162,51973.4235,3963.8231,3118.4
Build and expand your network with the Ubiquiti® UniFi® Switch XG 6POE, model US-XG-6POE. It is a fully managed, 6-port, 10G switch with 802.3bt PoE++. For deployment versatility, four 10G RJ45 ports offer 802.3bt PoE++ for powering devices, and two SFP+ ports are designed for high‑capacity fiber uplinks.Switching PerformanceThe UniFi Switch XG 6POE offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. The switch features a total non-blocking throughput of up to 60 GbpsModel: US-XG-6POE• (4) 100/1000 Mbps and 2.5/5/10G RJ45 Ports• (2) 1/10 SFP+ Ports• (4) 802.bt PoE++ Ports• Non‑Blocking Throughput: 60 Gbps• Switching Capacity: 120 Gbps• Forwarding Rate: 89.3 Mpps
RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lighting or surge damages. Comes with the outdoor case and special grounding cable. Maximum suggested cable lenght is ~40 meters.
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
PatchCord kat.5e FTP 2.0M gray- Patch Category 5e FTP (shielded)- Length: 2m- AWG 26 (8 * 7 * 0.16mm)- Conductor construction: cable 7 * 0.16mm- Color: gray RAL7035- Length meter meter every meter of cable- PVC outer insulation: 5.4mm- HDPE insulation veins: 0.93mm- Work up to 100Mhz- Compatible with ANSI / TIA / EIA-568B standards- Packaging: string bag
Seda Delocki USB 2.0 ja RS-232 kaablit saab kasutada CISCO ruuterite, kommutaatorite, pääsupunktide ja muude ühilduvate seadmete konsooli juhtimiseks arvuti või sülearvuti kaudu. Spetsifikatsioon - Ühendused: 1 x USB 2.0 Type-A isane 1 x jada RS-232 RJ45 pesa - Kiibistik: FTDI FT232RL - Ühildub USB 3.0, USB 2.0 ja USB 1.1 täiskiirusega 12 Mbit/s. - Andmeedastuskiirus kuni 230,4 Kbit/s - Kaabli pikkus koos pistikutega: ca. 1,8 m - Sobib erinevate CISCO seadmetega Süsteeminõuded - Linuxi tuum 2.6 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 2.0 ja 1 x jadaadapter - Draiveri CD - Kasutusjuhend
The Lanberg patch cable is designed for seamless connectivity and high performance in network applications. Built with Copper-Clad Aluminium conductors and HDPE insulation, this cable delivers reliable signal transmission at speeds of up to 1 Gbps. It features stranded construction, making it flexible for various installations while ensuring durability against physical stress. Compliant with ISO/IEC 11801 Class D and ANSI/TIA/EIA-568-B standards, this CAT 5e cable is tested for frequencies up to 100 MHz. The PVC jacket adds an extra layer of protection, safeguarding the internal components while enhancing the longevity of the cable. Ideal for home or office use, the Lanberg patch cable meets the demands of modern networking needs.
Throughput: 960 Forwarding rate: 714 Packet buffer: 56 MAC address table size: 128000 Jumbo frame size: 12 Number of VLAN groups: 4000 Power consumption: 237.2 Mean time between failures (MTBF): 249393 Dimensions: 440 x 44 x 345 mm Weight: 6.55
Ethernet LAN (RJ-45) PoE ports quantity 4 Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Auto MDI/MDI-X Yes MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Ventilation fan(s) No Power over Ethernet (PoE), W 120 SFP+ slots quantity 1 Maximum data transfer rate, Gbit/s 7.44 Switch type Unmanaged Ports quantity 5 Storage temperature range (T-T), °C -40 - 70 °C Jumbo Frames support Yes Supported data transfer rates 10/100/1000 Mbps Weight, g 500 Dimensions W x D x H, mm 29.1 x 107.3 x 139 Operating temperature range (T-T), °C 0 - 50 °C Power consumption, W 44.5 Switch layer L2/3 Switching capacity, Gbit/s 128 MAC address table, entries 16000 Power over Ethernet (PoE) Support Yes
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
