TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.HardwareMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 gMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 g
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
24-Port PoE Gigabit Smart Switch, 24x 10/100/1000Mbit/s TP (RJ-45) Port davon 12 x PoE 802.3af/802.3at, 802.3x Flow Control, statisches Trunking, bis zu 4 Ports in bis zu 8 Gruppen, Loopback Detection, 802.1Q VLAN
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
Mercusys AX3000 Whole Home Mesh WiFi 6 System with PoE Halo H80X (3-Pack) 802.11ax 574+2402 Mbit/s 10/100/1000 Mbit/s Ethernet LAN (RJ-45) ports 3 Mesh Support Yes MU-MiMO Yes No mobile broadband Antenna type Internal
