Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
1 x 100/1000BASE-T PoE sisendport 1 x 100/1000BASE-SX/LX SFP-pesa PoE toiteallikaga - toiteadapterit ei ole vaja SFP-pesa mahutab multimoodseid või ühemoodseid mooduleid Toetab Link Fault Pass-Through (LFPT) Jumbo Frame (9KB) toetus TRENDneti Gigabit PoE PD SFP Fiber Media Converter, mudel TFC-PGSFP, teisendab 100/1000BASE-T vask-Etherneti 1000BASE-SX/LX Fiber SFP meediumiks ja vastupidi. TFC-PGSFP saab mugavalt toite PoE-lülitist või injektorist, toiteadapterit ei ole vaja. Sellel on üks gigabitine PoE-sisendport toite- ja andmeside jaoks ning üks SFP-pesa, mis toetab nii multimoodilisi (SX) kui ka ühemoodilisi (LX) SFP-mooduleid. SFP-pesa mahutab nii Fast Ethernet kui ka Gigabit SFP-mooduleid, mis tagab täiendava paigaldamise paindlikkuse. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid multimood- või ühemood-kiudoptiliste rakenduste jaoks. PoE toiteallikaga Ei ole vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 jalga) kaugusele. Kompaktne Väike ja kompaktne metallkorpuse disain tagab suurema paigaldamise paindlikkuse. Pordid 1 x 100/1000BASE-T RJ-45 PoE sisendport, 1 x 100/1000BASE-SX/LX SFP-pesa. PoE toiteallikaga Ei vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 ft.) kaugusele. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust.
Features: High quality imaging with 4 MP resolution Clear imaging against strong backlight due to 120 dB true WDR technology Efficient H.265+ compression technology Water and dust resistant (IP66) and vandal proof (IK10) Built-in microphone for real-time audio security Focus on human and vehicle targets classification based on deep learning
Der DMG-31 von PowerOn verbindet Desktops mit einem High-Speed WLAN-Netzwerk. Er ist kompatibel mit den 802.11a/b/g/n (WiFi 4) Standards und erreicht Geschwindigkeiten von bis zu 300 Mbit/s bei 2,4GHz über einen freien PCIe x1 Port. Die zwei leistungsstarken 3dBi Antennen sorgen nicht nur für einen ordentlichen Datendurchsatz, sondern gewährleisten auch eine unterbrechungsfreie Datenübertragen auf größere Distanzen.
• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
The ultra-small USB adapter comes with Bluetooh 5.0 technology which allows fast pairing and stable and energy-saving connectivity. Turn non-Bluetooth PCs or laptops into Bluetooth-capable devices; making it possible to connect with Bluetooth headphones, speakers, keyboards, mice, etc. You can use the USB-C and USB-A port as you like and thanks to the mini size the BT0054 by LogiLink is also easily portable and perfect for on the go.
Der Netzwerkadapter Argus ST-7215 bietet eine hervorragende Performance und sorgt für schnellen Datendurchsatz. Der verbaute Intel® X540 Chipsatz entlastet den Hauptprozessor weitestgehend und sorgt so für einen schnellen Datentransfer bei niedriger CPU Auslastung. Standard Netzwerkadapter in Serverumgebungen nutzen dagegen oftmals die Rechenleistung des Hauptprozessors. Der Anschluss erfolgt durch einen RJ45-Port mit einer Geschwindigkeit von bis zu 10 Gbit/s.
The Intel® Wi-Fi 7 BE202 vPro is a state-of-the-art WLAN adapter that uses the latest Wi-Fi 7 technology to deliver unparalleled wireless connectivity. Wi-Fi 7 technology enables ultra-fast data transfer rates and improved network efficiency, while the vPro feature allows easy management and integration into enterprise environments. With its compact form factor, the Intel® Wi-Fi 7 BE202 vPro provides a reliable and high-performance wireless network connection that meets the demands of demanding enterprise environments.
This USB memory stick by Delock can be used to save and transport data, e.g. photos, videos or music. The USB stick can be connected optionally via the USB Type-C™ or USB Type-A plug, the inner part is simply turned and then latch into place. Due to the stylish design with eyelet, the small USB memory stick can be easily attached to the key ring for transport. Small sturdy helper Due to its small dimensions and its sturdy housing, this Delock USB stick is particularly suitable for travelling. Due to its tiny size, the USB stick fits into any trouser pocket. Downwards compatible The USB 3.2 Gen 1 Type-A connector is compatible to its forerunners USB 3.0, USB 2.0 and USB 1.1. Thus the memory stick can be connected to a USB 2.0 or USB 1.1 port too. The data transfer rate complies with the respective specification. Specification • Connectors: 1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male 1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male • Capacity: 64 GB • Maximum read speed: 100 MB/s • Maximum write speed: 46 MB/s • Maximum write cycles: 3000 • Operating temperature: 0 °C ~ 70 °C • Storage temperature: -25 °C ~ 85 °C • Power consumption: max. 5 W • Field of application: consumer • Plug & Play • Dimensions (LxWxH): ca. 36.8 x 12.1 x 7.1 mm System requirements • Chrome OS 72.0 or above • Linux Kernel 3.3 or above • Mac OS 10.14.3 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port or • PC or laptop with a free USB Type-C™ port Package content • USB 3.0 memory stick
Seda Delocki vöötkoodiskannerit saab ühendada juhtmevabalt arvutiga, sülearvutiga või otse mobiiltelefoni või tahvelarvutiga. Kõiki levinud 1D- ja 2D-viivakooditüüpe saab täpselt registreerida ka pikkade vahemaade tagant. Lisaks tunneb skanner ära ekraanidel ja monitoridel kuvatavad vöötkoodid. Automaatne kohanemine ümbritseva heledusega Skanner kohandub automaatselt vastavalt ümbritseva keskkonna heledusele ja jäädvustab optimaalsetes valgustingimustes kuni 120 skaneeringut sekundis. Vähese ümbritseva heleduse korral valgustab vöötkoodi täiendav valge LED ja seega saab seda kasutada ka kehvades valgustingimustes. Tugev töötlemine Tänu oma vastupidavale konstruktsioonile suudab skanner hõlpsasti taluda kuni 1,80 m kõrguse kukkumise ja sobib seega ideaalselt kasutamiseks tööstuskeskkonnas. Laadimisjaam toimib liidesena Skaneeritud vöötkoodide andmeedastus toimub kas Bluetoothi või 2,4 GHz sagedusala kaudu. Lisaks käsiskänneri laadimisele toimib skänneri induktiivne laadimisjaam ka nii Bluetoothi kui ka 2,4 GHz liidese funktsioonina ning on süsteemiga ühendatud USB-kaabli kaudu. Spetsifikatsioon Laadimisjaam - Ühendus: 1 x USB 2.0 Type-A pistikupesa - Sisendpinge: 5 V töö: max. 1100 mA ooterežiim: max. 700 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must - Kaal: umbes 295 g - Mõõtmed (LxSxK): ca. 180 x 100 x 75 mm - Kaabli pikkus ilma pistikuteta: ca. 1,25 m - Bluetooth standard V 4.1 - 2,4 GHz Vöötkoodi skanner - Dekodeeriv kiip: ARM Cortex 32 Bit - Laetav aku: Li-Polümeer aku 1800 mAh - Resolutsioon: max. 1280 x 800 - Käiviti: skaneerimisnupp - Lugemiskaugus: ca. 30 mm kuni 500 mm - Lugemise täpsus: 3 - 4 millimeetrit - Mõõtmisvahemik: kuni 10 m 2,4 GHz: kuni 100 m - Sisemine mälu: 16 MB - Valguse värvus: nähtav punane LED - Kompensatsioonivalgus: LED valge - Andur: CMOS-pildiandur - Skaneerimiskiirus: kuni 120 skaneerimist sekundis - Skaneerimisnurk: 55° - Ümbritsev heledus: max. 100000 luksi - Sisendpinge: 5 V - Voolutarve: V 5 töö: max. 220 mA ooterežiim: max. 20 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must / oranž - Kaal: umbes 321 g - Mõõtmed (LxSxK): ca. 185 x 100 x 80 mm - Skaneerimiskoodid: Koodid: Code 128 Kood 39 Vahelagunenud 2 5-st EAN-8 / EAN-13 ISBN - 13 Andmemaatriks Micro PDF417 Micro QR PDF417 QR-kood Süsteeminõuded - Android 9.0 või uuem versioon - Bluetooth standard 4.1 või kõrgem - iPad Pro (3. põlvkond) või uuem - Mac OS 10.15.5 või uuem - Windows 8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port dongle'i jaoks Pakendi sisu - Vöötkoodi skanner - USB-laadimiskaabel - Laadimisalus - Kasutusjuhend
See Delocki antenn võimaldab kasutada erinevaid LTE-, GSM- ja UMTS-sagedusalasid nii siseruumides kui ka välistingimustes. See on täielikult ühilduv Bluetooth, WLAN 2,4 GHz, ZigBee, DECT, Z-Wave ja LoRa 868 MHz / 915 MHz. Spetsifikatsioon - Ühendus: 1 x SMA-pistik - Sagedusvahemik: 690 - 960 MHz 1710 - 2170 MHz 2400 - 2700 MHz - ZigBee, DECT, Z-Wave, LoRa 868 MHz / 915 MHz - Antenni võimendus: 3 dBi - Impedants: 50 Ohm - VSWR: 2,0 - Polarisatsioon: vertikaalne - Ülekandevõimsus: max. 10 W - Antenni tüüp: varrasantenn - Seinakinnitused - Töötemperatuur: -30 °C ~ 70 °C - Korpuse materjal: plastik - Alus: metall - Värv: must - Kaabel: koaksiaalkaabel - Kaabli tüüp: RG-58 - Kaabli värvus: must - Kaabli läbimõõt: ca. 5 mm - Kaabli sumbuvus: 1 GHz meetri kohta: 0,57 dB @ 1 GHz meetri kohta - Kaabli pikkus: ca 3 m - Mõõtmed (LxD): ca. 26,9 x 1,6 cm Süsteeminõuded - Vaba SMA-pistikupesaga seade Pakendi sisu - Antenn - Kinnitusklambrid ja kruvid
