AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
TX201 PCI-E 1x2.5Gb network card Amazing speed - 2.5 Gigabit Ethernet enables access to your multi-gigabit network. The TX201 is up to any task, whether it's local data transfer or internet access. Compatibility with lower standards - The high speeds and ultra-low latency of the 2.5GBase-T standard do not preclude support for devices that use less advanced technologies such as Fast Ethernet or Gigabit Ethernet. The network card automatically negotiates connection speeds. Low-Profile and Full-Height Herring - In addition to the standard herring, a low-profile herring is included with the product for mini tower PCs. Multi-operating system support - Compatibility with Windows 11/10/8.1/8/7, Windows Server 2022/2019/2016/2012/2008 R2 and Linux means the card can be used on a wide variety of devices. Incredible 2.5G network connectivity 2.5 Gigabit Ethernet achieves an incredible data transfer rate of up to 2.5 billion bits per second 2.5× more than the Gigabit Ethernet standard. The TX201 card is ready for any task, such as bandwidth-hungry local data transfer or Internet access. Home data storage available in seconds For local connections, the PCIe 2.5G network card helps build an instant transport channel between the central server and other equipment on the local network. Performing bandwidth-intensive activities at home or in the office won't be difficult, so the network can easily handle local data transmission as well. Extremely fast response Along with 2.5 Gigabit internet access, your gaming experience will become fully optimised with a huge increase in speed, lower latency and better responsiveness. Downloading games, smooth live streaming, huge backups via the cloud are simple and fast, as is character selection. Performance versatility proven by multi-standard compatibility 2.5GBase-T technology is compatible with standards that provide speeds of both 2.5Gb/s, 1Gb/s, 100Mb/s and 10Mb/s Base-T standards. The 2.5G Ethernet port automatically negotiates connection speeds, so you can easily connect to a 2.5G network when it is available. QoS support Quality of Service technology will make sure your bandwidth is always sufficient and lag-free. Stream content, play online games and enjoy smooth internet browsing.
RUT142 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud RS232 jadaliidese, kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil, tagab see tõrgeteta ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstuslikke protokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga, et tagada tõhus kaug- ja kohapealne juhtimine.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4JADALIIDESRS232 jadakommunikatsiooniksTÖÖSTUSLIK DISAINIntegreeritud DIN-riba klamber ja 3-poolne toitepistikRMSKaugjuhtimine, juurdepääs ja VPN-teenused
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
The Ubiquiti repeater and transceiver is designed to meet the demands of modern networking. This device offers a data transfer rate of 10 Gbps and supports 10 Gigabit Ethernet, making it suitable for environments requiring high-speed data transmission. With LC multi-mode connectors, it ensures a secure and efficient connection, while its ability to extend up to 300 m makes it versatile for various networking setups. Its plug-in module form factor allows for straightforward installation, integrating seamlessly into existing network infrastructures. Whether for business or advanced home networks, this Ubiquiti product is engineered to provide reliable, high-performance connectivity.
The Ubiquiti UniFi UACC-Adapter-AC-210W power adapter is designed to deliver reliable performance with a polycarbonate construction that ensures durability and safety. Operating within a temperature range of 0°C to 40°C, this adapter withstands various environmental conditions while maintaining efficiency. With an input voltage range of AC 100 - 240 V and a voltage output of 54 V, it provides a power output of 210 watts, catering to diverse user needs.This wall-mountable adapter is equipped with a 1.5 m cord, allowing for flexible installation options. It meets UL 11353 standard compliance, reinforcing its credibility and safety in usage. Ideal for home and professional settings, the Ubiquiti UniFi power adapter offers energy solutions for all compatible Ubiquiti devices.
Features next-generation Bluetooth 6.0 with BLE for ultra-efficient, low-power wireless connectivity Built with LE Audio technology to deliver enhanced audio clarity while minimizing power consumption Supports seamless connection with up to 7 devices Ultra-small design for unmatched portability
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
5-Port GbE PoE Web Managed SwitchThe GS1200 Series Web Managed Gigabit Switch provides simple control for better management. Unlike other advanced but complex managed switches, this series of switch is suitable for most users and provides an affordable solution with essential features including VLAN, QoS, IGMP snooping, link aggregation, and port mirroring. These functions can be completed in just a few simple clicks through an easy, friendly, and intuitive Web GUI.There are five models for GS1200 series, coming with non-PoE (GS1200-5v3/8v3) to connect to devices including PCs, NAS, and print servers, PoE capable (GS1200-5HPv3/8HPv3) to provide power to IP CAM, wall mounted AP and PoE standard devices, and fiber uplink (GS1200-10v3) for easily deployment in hallways to connect network devices on the same floor and link them back to the core network.
The Ubiquiti UniFi Cloud Gateway Industrial (UCG-Industrial) is a security and cloud gateway specifically developed for industrial applications. Its robust construction and reliable performance make it ideal for demanding environments where stability, centralized management and resiliency are required. As a central network instance, the UCG-Industrial takes over important functions such as routing, firewall protection and network management within a UniFi environment. At the same time, it serves as a powerful management platform for access points, switches and other UniFi devices and supports the creation of a clear, scalable network structure. Gateway type Color black Manufacturer no. UCG Industrial Wall mounting design Area of application: business Network RJ-45 connections Fiber optic connections Connections speed WAN / Internet RJ-45 WAN connections WLAN standards Wi-Fi 3 (802.11b), Wi-Fi 3 (802.11g), Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 7 - (2.4 GHz, 5 GHz) WLAN transfer rate 688 MBit/s (WLAN 2.4 GHz), 4300 MBit/s (WLAN 5 GHz) WiFi coverage up to Hardware CPU Quad-core ARM® Cortex®-A73 2.2 GHz Hardware RAM 3GB Firewall IPS throughput 5000 MBit/s Power supply Power supply connection, power consumption operation: 28 W, PoE total budget: 270 W Feature Managed UniFi Devices: 50 - Cameras up to: 15x HD, 8x 2K, 5x 4K - WAN: 1x 10G SFP+, 1x 10 GbE RJ45, 1x 2.5 GbE RJ45 || Stateful Firewall, Application-Aware Layer 7 Firewall, DPI & Traffic Identification, Zone-Based Firewall Advanced Filtering (Regions, Domains, Apps), Content Filtering, Intrusion Prevention (IPS/IDS), Ad Blocking Further information MAC Address Table: 4000 Note Mobile App: UniFi iOS™: Version 10.32.0+, UniFi Android™: Version 10.35.0+ Dimensions Width: 307.9 mm x Height: 203.5 mm x Depth/Length: 43.7 mm Weight 2.4kg
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
