Wireless Frequency Range 2.4 GHz, 5 GHz | Power supply requirements 802.3at PoE or 12V/1.5A DC (Power Adapter Included) | Colour White | Dimensions 160 × 160 × 36.7 mm
ZTE G51F 5G ODU MC7510 Router Expand your connection with a strong signal and wide coverage. Ultra-fast 5G-A network with Sub-6 GHz NSA&SA dual-mode low-band 4MIMO design up to 3.6 Gbps Dual-band Wi-Fi 7 Ultra-wide 110-degree coverage 13 dBi AI ultra-high-gain antenna Algorithm 5.0 2.5G POE adapter Compact design, easy installation Extremely compact design IP65 protection against water and dust Quick installation on a window, wall, pole, or desk Ultra-thin power cable with 1.0 mm window entry
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
Tõhus jõudlus MikroTik GPeRx6 (CSS606-1G-2Gi-3S+OUT) on kompaktne välistingimustes kasutatav lüliti mis lihtsustab võrgu projekteerimist ühendades andme- ja toiteedastuse üheks lahenduseks. See on varustatud kolme Gigabit Etherneti pordiga ja kolme 10G SFP+ pordiga pakkudes nii vask- kui ka kiudoptilist ühenduvust paindlike võrgutopoloogiate jaoks. Esimene Etherneti port toetab PoE-in-i samas kui teine ja kolmas port võimaldavad PoE-out-i et toita ühilduvaid seadmeid nagu IP-kaamerad või traadita juurdepääsupunktid. GPeRx6 on varustatud spetsiaalse 10G lülituskiibiga mis tagab kõrge jõudluse ja stabiilse läbilaskevõime. IP66-klassiga vastupidav korpus kaitseb riistvara tolmu ja vee eest samas kui laia töötemperatuuri vahemik –40 °C kuni +70 °C tagab selle töökindluse ka rasketes tingimustes. Kompaktne ja vastupidav seade on lihtne paigaldada välistingimustesse pakkudes ettevõttetasemel jõudlust voolujoonelise ja vastupidava disainiga. Toitehaldus GPeRx6 pakub paindlikke toite sisendivõimalusi nii DC-pistikupesa (12–57 V) kui ka PoE-sisendi (42–57 V 802.3bt standard) kaudu. Energiatarbimine on tõhus alates vaid 6 W-st ilma lisakoormuseta ja ulatudes kuni 160 W-ni täisvõimsusel. Kaks Etherneti porti toetavad PoE-väljundit pakkudes ühendatud seadmetele kuni 57 V passiivset PoE-d. Sõltuvalt sisendpingest võib iga PoE-väljundport varustada kuni 1 2 A (alla 30 V) või 0 625 A (üle 30 V) voolu maksimaalse kombineeritud vooluga 2 4 A. Lisaks on seadmel kolm DC-väljundit PoE-d mittetoetavate seadmete toiteks. Etherneti kiudoptika ja mitmete toiteallikate kombinatsioon muudab GPeRx6 äärmiselt mitmekülgseks vähendades vajadust väliste adapterite või eraldi toiteinfrastruktuuri järele ning toetades samal ajal mitmesuguseid seadmeid välisvõrkudes. Paigaldamise paindlikkus GPeRx6 on mõeldud nõudlikesse keskkondadesse kus oluline on vastupidavus ja lihtsus. IP66-klassiga väliskorpus tagab vastupidavuse tolmu vihma ja äärmuslike tingimuste suhtes samas kui lai temperatuuritaluvus muudab selle aastaringselt töökindlaks. Kombineerides 10G SFP+ pordid pikamaa kiudoptiliste üleslinkide jaoks Gigabit Ethernetiga kohalike ühenduste jaoks ühendab see kaasaegse magistraali infrastruktuuri ääre-seadmetega. Sisseehitatud PoE-out ja DC-out funktsioonid vähendavad kaabeldusvajadusi edastades samaaegselt andmeid ja toidet sama hübriidkaabli kaudu. See funktsioon on eriti väärtuslik valvekaamerate kaugjuurdepääsupunktide IoT-andurite ja perimeetri turvasüsteemide jaoks. GPeRx6 lihtsustab oluliselt paigaldamist vähendades lisakaabeldust väliseid toiteallikaid ja ilmastikukindluse meetmeid. Selle tulemusena pakub see kulutõhusat viisi ehitada võimsad ja usaldusväärsed skaleeritavad välisvõrgud mis tagavad operaatoritele ja ettevõtetele pikaajalise paindlikkuse.
The simplest approach to connectivityGS1100 Series unmanaged Gigabit switches.Silent operationThe GS1100 Series features a fanless design that ensures silent operation in small or quiet office environments.Energy efficiencyThe GS1100 features Energy Efficient Ethernet (IEEE 802.3az), which automatically detects network traffic and dynamically adjusts power consumption. Zyxels eco-friendly features also adjust power usage by detecting link status and cable length. This helps reduce the companys operating costs.
The Zyxel NWA210AXv2 is a powerful dual-radio Wi-Fi 6 access point with AX5400 throughput that provides reliable and fast wireless connectivity in demanding environments and is suitable for both larger living spaces and smaller businesses. Equipped with advanced 802.11ax features such as OFDMA, MU-MIMO, and BSS Coloring, it delivers higher data rates, increased capacity, and stable connections even with high client density. Two 2.5 GbE multi-gigabit LAN ports ensure true multi-gigabit performance and eliminate typical wireless bottlenecks, while flexible power supply via PoE+ or USB-C enables versatile installation options. Advanced cellular coexistence minimizes interference from 4G/5G signals and contributes to consistent wireless performance. With NebulaFlex support, the access point can be operated either standalone or managed centrally via the Nebula Cloud, enabling easy deployment, monitoring, and scaling of the network. Additional security features such as Connect & Protect enhance protection through real-time filtering and traffic control, and Smart Mesh support makes it easier to expand wireless networks without extensive cabling. Overall, this device combines modern Wi-Fi 6 technology, versatile deployment options, and flexible management capabilities for high-performance and reliable wireless networks.
4G and Wi‑Fi 6 connectivity The industrial Teltonika RUTC41 router combines mobile 4G LTE Cat 4 with dual-band Wi‑Fi 6, making it ideal where stable network access and fast handling of many devices matter. Maximum WLAN speed of up to 2402 Mb/s on the 5 GHz band supports smooth operation of office systems, IoT devices and industrial installations. Key advantages >4G LTE Cat 4 – provides a mobile network connection in locations without fixed wired internet. >Dual-band Wi‑Fi 6 – supports a larger number of devices with better wireless network stability. >2402 Mb/s on 5 GHz – reduces data transfer time and improves network usability. >Docker – enables containerised applications to run without an additional computer. >1 GB RAM and 1.3 GHz dual-core processor – maintain smooth operation during demanding tasks. >Automatic SIM switching – maintains connectivity continuity if there are problems with one card or the operator’s network. Edge performance The combination of 1 GB RAM and a 1.3 GHz processor provides enough power for local data processing, event logging and edge services. This configuration reduces the need to move some tasks to an external server, which speeds up system response and simplifies deployment in the field. Docker and RutOS The router runs on RutOS and supports Docker, so you can run your own services without expanding the installation with a separate industrial computer. This is a convenient solution for deployments where quick configuration, remote management and the ability to expand the device’s functions as project needs grow are important. Stable local network The model offers 5 Gigabit Ethernet RJ-45 ports and Ethernet WAN support, making it easier to build a wired infrastructure for cameras, terminals, controllers and access points. In addition, support for QoS, load balancing, DHCP and static routes organises network traffic and keeps services operating predictably. Connection security RUTC41 supports a firewall, DMZ, MAC and IP address filtering, and protection against DDoS, increasing control over traffic in the company network. Authentication mechanisms are also available, such as digital certificates, X.509, TACACS+ and Radius, making the device better suited to environments with higher security requirements. Operation in harsh conditions The industrial router operates in temperatures from -40 to 75°C and humidity of 10-90%, so it is suitable for use in control cabinets, warehouses and technical facilities. The black housing and external SMA antennas make installation easier and help adapt coverage to the installation conditions.
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE.
5-Port 10/100Mbps Desktop Switch Five 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supportedEasily wired network expansionCompact design for flexible arrangementPlug and play setup, no configuration required
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz
G4 PTZ is a superior surveillance camera for shopping centers parking lots airports train stations and other transportation hubs. Pairing G4 PTZ’s advanced optical and video technologies with UniFi Protect’s ease of use creates a unique solution for the most demanding environments. G4 PTZ comes with IP66 weatherproof casing and flexible powering options.Note: UniFi Protect is required to run this product with full functionality its recommended to use it with UniFi Dream Machine PRO or UniFi Protect Network Video Recorder.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
TRB143 tööstuslik värav on loodud integreeritud M-Bus liidesega spetsiaalselt telemeetria ja kommunaalteenuste jälgimise rakenduste jaoks. Sellel on mobiilside- ja traadiga ühenduvus, üks Gigabit Ethernet-port ja paar digitaalset sisendit/väljundit, mistõttu on see rakendatav mitmesugustes keskkonnaseire stsenaariumides.
LT500 4G LTE AC1200 Dual Band WiFi Router LTE speed up to 150 / 50Mbps AC1200 Wi-Fi for smoother operation High-gain antennas for extended range PPTP/L2TP/OpenVPN/WireGuard/IPsec/Zerotier VPN Compatible with over 15 DDNS providers DNS via Cloudflare/NextDNS/Google
SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
