Rocket® Prism access points incorporate high-performance airMAX ac and airPrism technologies for maximum performance of wireless networks in high-density areas. 2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications) 2.4 GHz Coverage The Rocket® Prism 2 AC covers the full 2.4 GHz radio.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket Prism 2 AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications)
8 x Gigabit ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Wide operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (model: TI-M6024) TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. Integration Flexibility Managed layer 2 features include VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Shock and Vibration Resistant The industrial layer 2 managed switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6). Industrial Design Equipped with an IP30 rated metal enclosure, the industrial layer 2 managed switch operates within a wide temperature range of -40° – 75° C (-40° – 167° F). Network Ports Gigabit ports for high-speed network connectivity and SFP slots for long distance fiber applications Traffic Management Layer 2 Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping, and IP Source Guard provide the industrial layer 2 managed switches with layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure, includes DIN-rail mounting bracket for the industrial layer 2 managed switch Redundant Power Redundant power inputs with overload current protection (power supply sold separately) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power to the industrial layer 2 managed switch Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance from the industrial layer 2 managed switch Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges on the industrial layer 2 managed switch
The DIGITUS Industrial Gigabit switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple Plug-and-Play system allows the Industrial Gigabit switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit switch is a flexible, cost-effective solution for the industrial environment.
airFiber 11Breaking free from the congested 5 GHz band, airFiber® 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.Features: Full duplex Point-to-Point radio 11 GHz frequency operation Up to 1.2+ Gbps throughput Proprietary INVICTUS™ processor Integrates with airFiber® 11 GHz antennas Utilizes distinct Rx and Tx frequencies Accepts PoE or DC power Secure 128-bit AES encryption Power Source Options Support for PoE or DC power gives you the flexibility to power the AF-11 separately from Ethernet traffic. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Channel Configuration The airFiber AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific licensing requirements. The AF-11 also features different channel widths to suit your deployment needs, and you can independently configure TX and RX channel frequencies
4 x Fast Ethernet PoE+ porti 1 x Fast Ethernet port 90W PoE võimsuse eelarve 1Gbps kommutatsioonivõimsus Kaitsekindla IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba kinnitust ja seinakinnitusklambreid Lai töötemperatuurivahemik -40° - 75°C (-40° - 167°F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse TRENDneti tööstuslikel Fast Ethernet PoE+ DIN-Rail lülititel on vastupidav IP30 klassifikatsiooniga metallkapp. Need tööstuslikud haldamata PoE+ lülitid on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama nii kõrgetel kui ka madalatel temperatuuridel tööstuskeskkondades -40° - 75° C (-40° - 167° F). Redundantsed toitesisendid koos ülekoormusvoolukaitsega igas tööstuslikus haldamata PoE+ lülitis vähendavad võrgu seisakuid miinimumini. Paigaldajad ja integraatorid saavad TRENDneti tööstuslike kiirete Ethernet-kommutaatoritega säästa seadmete kulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE-toite ja -andmeid pordi kohta olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti, et edastada nii andmeid kui ka toitu tööstuslikust haldamata PoE+-kommutaatorist. Nende haldamata tööstuslike PoE+ kommutaatoritega saate hõlpsasti ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ- ja muid täiustatud IP-kaameraid, VoIP-telefonisüsteeme, IPTV-dekoodereid, juurdepääsukontrolli ja palju muud. PoE+ võimsus 90 W PoE+ võimsuse eelarve varustab kuni nelja Power over Ethernet seadet PoE+ toiteallikaga. Riketolerantsus Tööstuslikul Ethernet-kommutaatoril on redundantsed toitesisendid. Tööstuskindlusega disain Varustatud vastupidava IP30 klassifikatsiooniga korpusega, mis on loodud taluma suurt vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40-75°C (-40-167°F). PoE+ toide Tööstuslikul Ethernet-kommutaatoril on 90 W PoE+ võimsuse eelarve, et varustada kuni nelja Power over Ethernet seadet PoE+ toiteallikaga. Lihtne paigaldus Ei ole vaja konfigureerimist, lihtsalt ühendage PoE+ võrguseadmed tööstusliku Ethernet-kommutaatoriga Kiired Ethernet-pordid 4 x Fast Ethernet PoE+ porti ja 1 x Fast Ethernet port DIN-riba / seinakinnitus IP30 klassifikatsiooniga metallist korpus koos kaasasoleva DIN-riba ja seinakinnituse riistvaraga Lülitusvõimsus Tööstuslik Ethernet-kommutaator 1 Gbps kommutatsioonivõimsusega Redundantne toide Redundantsed toitesisendid koos ülekoormusvoolukaitsega (toiteallikas müüakse eraldi, mudel: TI-S15052, TI-S12048). Lai temperatuurivahemik Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) võimaldab paigaldamist tööstuskeskkondades, kus on äärmiselt kuumad või külmad tingimused. Löögi- ja vibratsioonikindlus Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6). Maanduspunkt Tööstuslik Ethernet-lüliti maanduspunktiga, mis kaitseb seadmeid väliste elektriliste ülepingete eest
TSW200 switch TSW200 is an industrial unmanaged switch from Teltonika Networks. It is equipped with 2 SFP ports for long-range fiber optic communication and 8 Gigabit Ethernet ports that support IEEE802.3af and IEE802.3at Power-over-Ethernet standards. Classified as Power Supply Equipment (PSE), it centralizes power, providing up to 30 watts per port. It has 10/100/1000 Mbps Ethernet ports, providing a cost-effective, high-bandwidth solution for industrial Ethernet. This rugged industrial switch is ideal for high-bandwidth professional applications where you need to provide both a reliable data connection and power.
TRENDnet’s high efficiency 120 W Single Output Industrial DIN-Rail Power Supply, model TI-S12048 (Mean Well SDR-120-48), supplies up to 120 Watts (48 V, 2.5 A) of power to industrial PoE equipment such as switches, network cameras, and WiFi access points. This power supply comes with active PFC, an integrated DIN-rail mount, and overload current protection.120 Watt PowerProvides up to 120 Watts (48 V, 2.5 A) of power for PoE devices such as switches, network cameras, and access pointsActive PFCThe built-in active Power Factor Controller (PFC, PF > 0.93) helps eliminate unusable reactive powerOverload ProtectionOverload/short circuit/over voltage/over temperature protectionFull Load TestThis power supply undergoes a 100 % full load burn-in testPassive CoolingCooling by free air convectionDIN-Rail MountMetal enclosure with integrated DIN-rail mountExtreme TemperaturesRated for an operating temperature range of -25 to 70 °C (-13 to 158 °F)Safety CertificationsCertified for UL 508 and TUV EN60950-1Electro Magnetic Emission/ImmunityCompliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2/3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A, SEMI F47, and GL approvedVibration ResistantRated for vibrationLED IndicatorLED indicator confirms power to the unitToote tüüpToiteplokkToote värvMetallikLED-indikaatoridJahToite kaitsefunktsioonidÜlepinge, Ülekoormus, LühisKeskmine tõrkeintervall (MTBF)2899000 hSertifikaatCE, UL, TUVKoguvõimsus120 WAC-sisendpinge100 - 240AC-sisendsagedus50 - 60Sisendvool1.8Kasutamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 90 protsentiLaius40 mmSügavus125 mmKõrgus114 mmKaal670 g
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
See Delocki kaabel võimaldab ühendada DVI-liidesega seadmeid, nt monitori, DisplayPort-liidesega. Spetsifikatsioon Liitmikud: 1 x DisplayPort isane > 1 x DVI 24+1 isane koos kruvidega Kiibistik: PS8402A DVI-D (Dual Link), VGA juhtmeta DisplayPort 1.2a spetsifikatsioon Passiivne kaabel (level shifter), sobib ainult DP++ väljundiga graafikakaartidele Signaali suund: DisplayPort sisend > DVI väljund Kaabli gabariit: 30 AWG Kaabli läbimõõt: umbes 6 mm Twisted-pair kaabel Vaskjuht Kontaktid kullatud Kolmekordselt varjestatud kaabel Andmeedastuskiirus kuni 10,2 Gb/s Resolutsioon kuni 3840 x 2160 @ 30 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) Värv: must Pikkus ilma pistikuteta: ca. 3 m Süsteeminõuded Vaba DisplayPort DP++ emissioon Pakendi sisu DisplayPort-DVI kaabel
