Wi-Fi Access Point 6 AX1800 PoE DAP-X2810 Wi-Fi 6 AX1800, up to 1.8Gbps Dual-band, 2x2 MIMO, airtime fairness and bandwidth control functions Free software and Nuclias Connect app Convenient installation with PoE Configurable captive portal D-Link Lifetime Limited warranty Scalable and easy to manage corporate WiFi network 6. The DAP-X2810 with Wi-Fi 6 networking provides businesses of all sizes with fast connections, significantly increased capacity and interference-free coverage, all combined with centralised management via Nuclias Connect. Easy management of your corporate network The DAP-X2810 works with Nuclias Connect, a software-based management platform (with optional hardware controller). This enables you to manage and control your business network from anywhere via the Internet, providing easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation - Wi-Fi 6 Greater network performance and lower latency, with almost four times the capacity of previous Wi-Fi standards Secure performance WPA3 encryption provides security with high throughput with dual-band 2x2 MU-MIMO technology, bandwidth control and airtime fairness to intelligently manage users. Flexible deployment with PoE Support for Power over Ethernet (802.3at) simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. No licence required Work as a standalone access point or as part of a centralised, scalable multi-device deployment according to the needs of the business. More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options for delegated access across the network. Deployment, configuration, upgrading and expansion is possible from multiple locations using an intuitive dashboard. Captive portal Captive Portal, the industry standard for authentication, streamlines access management with the ability to add brand information. Free software and application Quickly configure, manage and monitor access points locally via a free management tool or remotely via the Nucliast Connect app. Next-generation WiFi 6 performance with huge speed improvements Combined Wi-Fi 6 802.11ax connection speeds of up to 1,800 Mbps provide the DAP-X2810 with lightning-fast transfer rates, enabling large amounts of data and efficient video streaming, even in high-density environments Next-generation Wi-Fi 6 connections deliver higher network performance and lower latency, and nearly four times the capacity of previous Wi-Fi standards. Optimised Wi-Fi for convenient connections The DAP-X2810 supports 2x2 MU-MIMO bandwidth control and beamforming functions, which are designed to reduce network congestion. In addition, load-balancing technology and Airtime Fairness manage access point loads to optimise resource utilisation. This ensures that each device connected to the network connects at peak performance without overloading the entire network. Multiple modes of operation The DAP-X2810 can be configured to suit your network needs and optimise network performance. Access point Wireless distribution system (WDS) with access point WDS/bridge (without AP broadcast) Wireless client Easy and hassle-free installation anywhere. The DAP-X2810 can be placed on a desk, ceiling or wall mounted. The PoE function makes installation quicker and easier as there is no need to lay additional power cables. This is ideal for extensive deployments in locations where power sockets are not readily available. Corporate network management with advanced control mechanisms Nuclias Connect enables you to manage and control your network from anywhere. It provides insight into network performance and user activity through traffic analysis and status reports, available in a browser or free app. Detailed data from network traffic analysis, which can be displayed for the entire network down to the single access point level, can be used to create business value. Comprehensive on-site network management Nuclias Connect, compared to traditional hardware-based unified management systems, offers a great deal of flexibility. Easy configuration, remote access and an intuitive dashboard provide administrators with management efficiency and convenience, while functionality and automated network tools such as airtime fairness, throttling location and load balancing improve the user experience. Scale up your WiFi network as your business grows Nuclias Connect enables unlimited scalability, allowing you to adapt the size of your network to suit your business requirements. Expanding or setting up a network in a new location is quick and easy. Management and configuration is done via the cloud, and access points and surveillance cameras are automatically detected and ready for deployment right out of the box. Greater brand awareness with captive portal Guest web visitors are not only able to connect using an email address, Facebook or Google account. Captive portal enables increased brand awareness, the placement of advertisements and promotions, and the collection of user information to gain a better understanding of customer behaviour.
QG-U1080, 8-Port 2.5G and 2-Port 10G SFP+ Unmanaged Switch, Support 4 Intelligent Modes, Home Network Hub, Office Ethernet Splitter, Plug and Play, Easy Setup, Desktop, Silent Operation Upgraded 2.5G ports and 10G SFP+ - Seamlessly upgrade to 2.5G by using standard CAT5e Ethernet cables to enjoy faster network performance. Support four intelligent functions - priority, EEE, port isolation, and static trunk. One switch is all you need to safeguard and optimize your home or business network. Plug and Play, Effortless Setup - Setting up your network has never been easier! Simply connect your devices, and youre good to go-no complicated configurations required. Versatile Networking Expansion - You can connect 2.5G/10G-compatible devices, including NAS, AP, Gaming PCs, and 4K streaming devices to achieve a more comprehensive network setup. Upgrade to the 2.5G Ultra-Fast NetworkExperience lightning speed and seamless connectivity like never before. Genuine WiFi Integration for Real PerformanceThe QG-U1080 unlocks the full potential of WiFi 6/7 APs. Unlike traditional Gigabit Ethernet switches, it removes performance limitations, delivering a superior and uninterrupted experience. 10G SFP+ unbeatable powerDesigned for high-performance networking, 10G SFP+ ports deliver ultra-fast speed, ensuring your infrastructure can handle the most demanding workloads. The QG-U1080 is ready for modern and high-end networking applications. Plug and Play, Hassle-Free UpgradeTwo Steps, No Setup Required, Ready to Go. Simply continue using your existing CAT5e cables, and experience the seamless convenience of an effortless network upgrade that enhances your connectivity and performance. One Click, Instant TransformationCheck out how these four intelligent features can enhance your network configuration. PriorityPriority allows you to optimize your network's performance by prioritizing traffic based on importance during peak usage times. Energy Efficient Ethernet (EEE)Energy Efficient Ethernet (EEE) is the smart way to reduce your network's energy footprint. With EEE, your Ethernet switches automatically adjust power consumption based on real-time traffic, ensuring energy savings when your network is less active. Port IsolationPort Isolation provides a secure and efficient way to manage your network. By isolating each port, it ensures that traffic on one port does not affect other devices, enhancing both security and performance. Static TrunkStatic Trunk enables you to combine multiple network links into a single, high-performance connection. This increases bandwidth, improves reliability, and enhances fault tolerance, making your network faster and more resilient. Ready to Upgrade? Experience the Speed of 2.5G!With the QG-U1080, you can connect various devices to expand your network setup, including Wi-Fi 6 access points (AP), NAS, 4K streaming devices, and gaming consoles requiring high-speed internet.
SWM282 on suure võimsusega L2 hallatav switch täiustatud L3-võimalustega, mis on loodud võrgu juhtimise lihtsustamiseks, pakkudes samal ajal võimsust ja ühenduvust suurel määral. See on varustatud 24 PoE+ pordiga, mis pakuvad kuni 30 W võimsust pordi kohta, koguvõimsusega 300 W, ja 4 SFP pordiga. PROFINETi ja muude tööstusprotokollide toetusega on see 24-portiline switch ideaalne valik ettevõttevõrkudele ja IIoT-lahendustele.PoEVõimsuse ja andmete edastamine 24 PoE+ pordi kaudu, kuni 30 W pordi kohta.L2Täiustatud marsruutimisprotokollid, VLAN-segmenteerimine ja TPM 2.0 turvalisus.PilvepõhineKaasas 2-aastane RMS-haldus.ProtokollidProfinet, MRP ja EtherNet/IP segatud tööstuskeskkondadele.
Ubiquiti UniFi Pro XG 48 PoE | Type Managed | Switch layer L3 | Quality of Service (QoS) support Yes | 48xBasic switching RJ-45 Ethernet ports quantity | Basic switching RJ-45 Ethernet ports type 10G Ethernet (100/1000/10000) | 4xSFP28 ports quantity | Yes | Port mirroring Yes | Switching capacity 920 Gbit/s | Throughput 460 Gbit/s | Forwarding rate 684 Mpps | Rack mounting Yes | Stackable Yes | Form factor 1U | Product colour Grey | Power source AC/DC | Power supply included Yes | Power over Ethernet (PoE) Yes | Power over Ethernet (PoE) power per port 15.4 W | Total Power over Ethernet (PoE) budget 1080 W | Width 442 mm | Depth 480 mm | Height 44 mm | Weight 8700 g
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections.Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
Gross depth (mm): 99 mm Gross height (mm): 104 mm Gross width (mm): 171 mm Packing quantity: 1.00 pc(s) Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: Yes Other features: with AC Passthrough Paper/Pasteboard: 110 g Plastic (No PET): 3 g Producer product name: RE365 Producer product family: Extender Ethernet LAN (RJ-45) ports: 1 POE: no PoE Wi-Fi band: 802.11ac Antenna type: 2xExternal Ethernet LAN data rates: 10/100/1000 Mbit/s Wi-Fi data rate (max): 300+867 Mbit/s Frequency band: 2.4GHz/5GHz MU-MiMO: No
NanoStation LocoM5, 5 GHz, 150+ Mbps, range 10+ km, 13 dBi, Pole Mounting kit included, Power method - Passive Power over Ethernet,airMAX,EU (LOCOM5(EU))
CRS354-48G-4S+2Q+RM Best price and best performance on the market – this 48 port switch will rock any setup, including 40 Gbps devices!If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product Mikrotik aim to set a new price-performance bar – get more features while spending way less!High-end performance for the masses: more 10G ports and even 40G ports, because speed matters.The 48 port champion you’ve been waiting for– the bargain of the decade!This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 4x10/100M, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Number of antennas 2, Wireless Frequency Range 2.412~2.472 GHz, Windows 10, Windows 8, Windows 7, MacOS, Windows 98, Windows 2000, Windows NT, Windows XP, Windows Vista, Power supply requirements 5VDC / 0.6A, Dimensions 115 x 106.7 x 24.3 mm
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz
Deco M5 uses the latest technology to create a wireless mesh to paint your home in Wi-Fi. Mesh technology relies on several units working together to replace your router and create seamless Wi-Fi in every room. Each Deco mesh router can work independently, with in the network, to cover up to 4,500 sq. ft. of fast Wi-Fi. For even more coverage, you can use up to 9 Deco M5 units on a single network.
4G LTE CAT12 Download up to 600 Mbps. Upload up to 150 Mbps WIFI & BT Wave-2 802.11ac Dual Band WIFI and Bluetooth LE DUAL SIM With auto failover, backup WAN and other switching scenarios LOAD BALANCING Allows to use multiple WAN sources to increase throughput GNSS Global Navigation Satellite System for location services with geofencing functionality RMS Compatible with Teltonika Remote Management System // RUTX14 is the fastest single modem LTE router in our portfolio. // 5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, USB interfaces, dual SIM for advanced throughput and ultra-reliable connectivity. // Equipped with advanced security features like multiple VPN's, firewall & cyber attack prevention. // Combination of fast LTE CAT12 connectivity, wide range of physical interfaces, extensive RutOS functionality and great remote management capabilities make this device an excellent choice for primary or backup connectivity
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
The 10 Gbps Direct Attach Cable is an SFP+ compatible cable capable of sustaining 10 Gbps throughput. This cable is perfect for creating short links between switches that deliver 10 Gbps speed throughout your network.
