Võrguseadmed

Features and Benefits Front-end intelligence with Click&Go Plus control logic, up to 48 rules Active communication with MX-AOPC UA Server Automatically complement disconnection period data with MX-AOPC UA Logger software 4-port unmanaged switch built in for linking to Ethernet devices I/O expansion port for daisy chaining up to 8 ioLogik E1200 units 3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field Supports SNMPv1/v2c/v3 Simplify I/O management with MXIO library for Windows or Linux platforms Wide operating temperature range of -40 to 75°C (-40 to 167°F) Introduction The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses. Powerful Control Logic from the New Click&Go Plus™ The new Click&Go Plus™ control logic now supports up to 48 rules with further upgrades to 8 onditions/actions. In addition, its graphical user interface provides 3 logic gates and 3 multi-layers, helping you build more powerful and efficient IO solutions. Once you finish setting up your Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus™ rules before uploading them to your online devices. Peer-to-peer (P2P) mode is widely used for industrial applications. Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically. One IP for Multiple Expansion I/Os Gives You a Smarter Data Acquisition Solution The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8 ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network. User-Friendly IOxpress with Offline/Online Configuration for Easy Device Management IOxpress integrates a user-friendly interface with offline/online configuration, allowing you to configure every I/O parameter offline, and then upload the settings to your online devices, greatly reducing the time and cost needed to manage and configure your IO solutions. Powerful Datalogger and Value-added MODBUS Gateway The ioLogik 2500 supports micro SD cards with up to 32 GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2 serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network. New MX-AOPC UA Server Efficiently Reduces System Response Time The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is easier, since you won’t need to worry about DCOM settings. In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur. In this way, information can be accurately and efficiently pushed to the SCADA system as it becomes available.

Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Supports IEC 60870-5-101 master/slave (balanced/unbalanced) Supports IEC 60870-5-104 client/server Supports Modbus RTU/ASCII/TCP master/client and slave/server Effortless configuration via web-based wizard Status monitoring and fault protection for easy maintenance Embedded traffic monitoring/diagnostic information for easy troubleshooting microSD card for configuration backup/duplication and event logs Built-in Ethernet cascading for easy wiring Redundant dual DC power inputs and relay output -40 to 75°C wide operating temperature models available Serial port with 2 kV isolation protection Security features based on IEC 62443, Introduction The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems. Easy Configuration via Web Console The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. Modbus RTU/ASCII/TCP Protocol Traffic Monitor MGate 5114 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem. Maintenance Functions MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system when a device gets disconnected or does not respond, in which case the PSCADA system gets the status of each end device and then issues alarms to notify operators.

RM-G4000 moodulite seeria sisaldab Gigabit- ja Fast Ethernet-mooduleid RKS-G4000-seeria rack-monteeritavate Ethernet-kommutaatorite jaoks. Iga RM-G4000-seeria moodul toetab kuni 8 porti erinevate liidesetüüpidega, sealhulgas TX, MSC, SSC ja MST meediatüübid. Lisaks pakuvad RM-G4000-8GPoE ja RM-G4000-8PoE moodulid RKS-G4000 seeria PoE-mudelitele suure võimsusega PoE-funktsioone. IEEE 1588 liidesemoodulid pakuvad riistvarapõhiseid PTP-funktsioone täpseks ajasünkroniseerimiseks kogu võrgus. Ethernet-liides 10/100BaseT(X) pordid (RJ45 pesa) 4 100BaseFX-pordid (mitmemoodiline SC-pistik) 2 Valguskaabel Võimsuse parameetrid Võimsustarve (max.) 2.88 W Füüsikalised omadused Kaal 400 g (0,88 lb) MTBF Aeg 2,891,502 tundi Standardid Telcordia (Bellcore), GB Garantii Garantiiperiood 5 aastat

Supports Auto Device Routing for easy configuration Supports route by TCP port or IP address for flexible deployment Connects up to 32 Modbus TCP servers Connects up to 31 or 62 Modbus RTU/ASCII slaves Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master) Supports Modbus serial master to Modbus serial slave communications Built-in Ethernet cascading for easy wiring 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector) Emergency request tunnels ensure QoS control Embedded Modbus traffic monitoring for easy troubleshooting Serial port with 2 kV isolation protection (for “-I” models) -40 to 75°C wide operating temperature models available Supports redundant dual DC power inputs and 1 relay output Introduction The MGate MB3170 and MB3270 are 1 and 2-port Modbus gateways, respectively, that convert between Modbus TCP, ASCII, and RTU communications protocols. The gateways provide both serial-to-Ethernet communication and serial (master) to serial (slave) communications. In addition, the gateways support simultaneously connecting serial and Ethernet masters with serial Modbus devices. The MGate MB3170 and MB3270 Series gateways can be accessed by up to 32 TCP master/clients or connect to up to 32 TCP slave/servers. Routing through the serial ports can be controlled by IP address, TCP port number, or ID mapping. A featured priority control function allows urgent commands to obtain an immediate response. All models are rugged, DIN-rail mountable, and offer optional built-in optical isolation for serial signals. Integrate TCP Masters without Altering the Modbus RTU/ASCII Network or Software The MB3270 can integrate Modbus TCP with Modbus RTU/ASCII, without modifying the existing Modbus RTU/ASCII architecture or software. With the serial redirector function, a serial master can maintain direct access to serial slave devices through a specially mapped serial port. This allows the serial and TCP masters to access serial slaves simultaneously. Optical Fiber for Ethernet Communication The MGate MB3170 Series includes 100BaseFX fiber models that support transmission distances up to 4 km for multi-mode models, and up to 40 km for single-mode models. Optical fiber is well-suited for industrial applications because it is immune to electromagnetic noise and interference. For environments that experience high ground loop voltages, fiber provides the best isolation protection, and because there is no danger of sparking, optical fiber is safer than copper wire to use in hazardous environments. Auto-Device Routing for Easy Configuration (Patent Pending) Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and cost. Priority Control for Urgent Commands (Patented) As Modbus networks increase in size and complexity, the lag time between commands and responses becomes a major concern. Advanced models of the MB3000 Series provide a priority control function for urgent commands, allowing users to force certain commands to get an immediate response. Depending on your system’s requirements, different methods are available to define which commands receive priority. Patent Numbers: (US/TW) US7,743,192 B2/I332618 US7,725,635 B2/I321007