Lihtne paigaldus Pikendab 100 m, et saavutada kuni 200 m (656 ft.) kaugus. Kuni 4 seadet saab ühendada, et PoE-võrk ulatuks kokku kuni 500 m (1640 jalga) *. Kasutage ühte UPoE ühendust, et laiendada PoE-d kuni kahe seadme jaoks. Toetab PoE (15,4 W), PoE+ (30 W), UPoE (60 W) seadmeid. Lai töötemperatuurivahemik -40°- 75° C (-40° - 167° F) IP67 välitingimustele vastav korpus Ei vaja välist toiteadapterit Sisseehitatud tõelise ülepinge 6kV kaitse TRENDneti 2-portiline tööstuslik välitingimustes kasutatav Gigabit UPoE laiendaja, mudel TI-EU120, võtab ühe UPoE-ühenduse ja pikendab seda täiendavalt 100 meetrile (328 jalga) kuni kahe PoE+ seadme jaoks. See tuvastab automaatselt PoE (15,4 W), PoE+ (30 W) või UPoE (60 W) signaali ja laiendab seda kuni 200 meetri kaugusele PoE-allikast. Kuni 4 seadet saab ühendada kuni 500 meetri (1640 jalga) pikkuse PoE-võrgu laiendamiseks. Sellel välitingimustes kasutataval UPoE laiendajal on üks UPoE sisendport ja kaks PoE+ väljundporti, mis on ümbritsetud IP67 standardile vastavasse ilmastikukindlasse korpusesse. Sisseehitatud pingebooster tagab stabiilse pinge väljundi teie suure võimsusega PoE-seadmetele. UPoE toide Laiendab UPoE ühendust kuni 100 meetri kaugusele PoE (15,4 W), PoE+ (30 W) ja UPoE (60 W) seadmetele** Gigabiti pordid Omab ühte gigabit UPoE sisendporti ja kahte gigabit PoE+ väljundporti, mis laiendavad ühe UPoE-ühenduse täiendavalt 100 meetrile (328 jalga) kahele PoE+ seadmele. Välitingimustes kasutamiseks mõeldud Ehitatud väliskeskkondadesse, millel on IP67 ilmastikukindlus ja töötemperatuurivahemik -40°- 75° C (-40° - 167° F). Laienduskaugus Laiendab PoE/PoE+/UPoE võrguühendust täiendavalt 100 meetri võrra, nii et kogu kaugus PoE allikast on kuni 200 meetrit (656 jalga). PoE/PoE+/UPoE Tunnistab automaatselt PoE (15,4 W), PoE+ (30 W) ja UPoE (60 W) võrguühendused Gigabit-pordid 1 x gigabit UPoE sisendport, 2 x gigabit UPoE väljundport ja 64W PoE eelarve koos 95W UPoE sisendiga 1 x gigabit UPoE sisendport, 2 x gigabit PoE+ väljundport ja 46W PoE eelarve 60W UPoE sisendiga Daisy Chain Ühendage kuni 4 seadet PoE-võrgu laiendamiseks kuni 500 m (1640 jalga)*. PoE toiteallikaga Ei vaja välist toiteallikaid - säästab paigaldusaega ja kulusid Välitingimustes kasutamiseks valmis Vastupidav IP67 välitingimustele vastav korpus
The Mimosa B11 backhaul radio is designed for the modern Internet era, adapting instantly to variable upstream and downstream bandwidth requirements. The B11 is fiber-ready—simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you are not quite ready for fiber, the B11 also comes with a standard gigabit power-over-ethernet connection.We’ve simplified the licensing process and offer instant visibility into the FCC ULS database to quickly assess surrounding links, providing an early indication of coordination viability. A single B11 can support an entire 10.7 – 11.7 GHz band, maximizing your ability to find a clear, licensable channel.Superior PerformanceOur speeds will blow you away. With up to 1.5 Gbps aggregate speed and under 1 ms latency, high performance has never been this affordable. The B11 has the lowest cost per Mpbs in the industry with link distances over over 100 km.Ultra RuggedCarrier grade IP67 design allows the B11 to withstand the harshest of environmental conditions.Night and DayThe B11 dynamically adapts to bandwidth demand using auto-TDMA technology, maximizing spectrum utilization throughout the day.Monitor with EaseAssessing link health and identifying potential problems has never been easier. Links are continuously monitored by our Mimosa Cloud service with rich data collection and analysis.Right on TargetWe’ve taken the guesswork out of antenna aiming by adding 2.4 GHz WiFi right in the radio, turning any smartphone into the most sophisticated aiming tool on the planet. You can instantaneously view radio details and target signal levels with the most precise aiming technology in the industry.
8 x Gigabit PoE+ ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules PoE power budget: 240W@48VDC or 124W@24VDC PoE alive check restarts unresponsive PoE powered devices 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024) TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget, and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber applications. The hardened switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. PoE Power A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Integration Flexibility Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Industrial Design Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Traffic Management Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Switching Capacity 20Gbps switching capacity Redundant Power Redundant power inputs with overload current protection (power supply sold separately: TI-S24048, TI-S48048, TI-S12024) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
A955MQuMax for Teltonika RUT955Integrated outdoor multi band high power LTE directional antenna + outdoor Wi-Fi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one).QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT955 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna and outdoor Wi-Fi omni antennas.
FlexHD-CM-3Ceiling Mount for UniFi FlexHDRecessed ceiling mount accessory for the UniFi FLEX HD access point. Mount the UAP-FlexHD to a drop ceiling tile, drywall ceiling or solid ceiling for discreet, low profile appearance. Sliding retainer with locking threads and a snap-in mechanism for the UAP-FlexHD make mounting simple. Magnetic face place hides the bracket for a stylish finish.Features: Low profile (2”, 51mm), discreet ceiling installation Guided snap-in locking mechanism for UAP-FlexHD Adjustable, sliding retainer for mounting without screws Magnetic 3 1/3” inch (85 mm) face plate Requires 2 1/8” inch (54 mm) cutout Includes drywall mounting hardware and anchors
10G-ready rackmount 16-port 1U patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Supports ANSI/EIA/TIA 310-D, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty
Set of two separate eXtra Range LTE directional antennas for bi-directional connection to two different LTE base stations. The main antenna has integrated also dualband Wi-Fi GPS Bluetooth antennas and space to install Teltonika RUTX12. The second antenna is only directional LTE XR antenna.The QuMax XR2 a is bi-directional LTE eXtra Range antenna set (two separate antenna) two connect to two different LTE base station (it can also be connected to one base station in order to obtain a greater share of the transfer from that base station). The main antenna additionally has built-in Wi-Fi dual band GPS and Bluetooth antennas 2x Nf connectors for the second LTE antenna and a space to install the RUTX12 router inside antenna enclosure. The second antenna is LTE Extra Range directional antenna only and is in smaller enclosure. The QuMax XR2 set is dedicated to long-range connections from the LTE base station also to two different base stations which gives optimal use of functions such as load balancing and carrier aggregation.
This USB extension cable by Delock can be connected to a USB port of your computer and enables an extension of 10 m. You can connect up to four USB devices to the Hub. In case these USB devices do not have an own power supply you may need an optional power supply, e.g. Navilock 41337, which can be connected to the Hub.
