Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 1.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
The DIGITUS Industrial Gigabit switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple Plug-and-Play system allows the Industrial Gigabit switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit switch is a flexible, cost-effective solution for the industrial environment.
10G-ready rackmount 16-port 1U patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Supports ANSI/EIA/TIA 310-D, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty
Schutzkontakt-Steckdosenleiste, mit drei Anschlüssen, Überspannungsschutz bis zu 13.500 A, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Funktionskontrollleuchte, Stecksystem DE (Stecker-Typ F)
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
The DMG-07 is a 2-in-1 WiFi & Bluetooth 4.2 adapter. It allows you to connect a notebook or PC to the WiFi network at home or in the office. The WiFi (802.11 a/b/g/n/ac (WiFi 5)) USB 2.0 adapter is ideally suited for accessing the Internet at speeds of up to 650Mbit/s on a 2.4GHz or 5GHz network. In addition to the WiFi function, the DMG-07 also offers a Bluetooth 4.2 interface, allowing the computer to connect to a smartphone, tablet, or another Bluetooth device. Since WiFi and Bluetooth connections are possible at the same time, the DMG-07 can, for example, play files from the WiFi network directly on a Bluetooth speaker or headphones.
Belkin NPA004BTBK. Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Jaoturi liidesed: 3.5mm, USB tüüp-C. Maksimaalne värskendussagedus: 20000 Hz, Toote värv: Must, USB Power Delivery kuni: 60 W. Pistiku tüüp: Tüüp C. Laius: 33 mm, ...
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing