Original part number PP12-1.5M/B Product name Gembird patchcord RJ45, cat.5e, UTP, 1.5m, blue Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 1.5 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Boot non-snag-proof Colour Blue
- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support
Environmentally Hardened DesignRedundant Ring, Fast Recovery for Critical Network ApplicationsDigital Input and Digital Output for External AlarmIPv6 / IPv4 Full-functioned Secure Switch for Building Automation NetworkingIPv4 and IPv6 VLAN Routing for Secure and Flexible Management
Original part number WZ0031 Product name LOGILINK - Digital Caliper Producer LogiLink Class of product Tool/Tester Tool type Measuring instrument Additional information Suitable for internal and external measurementImperial or metric readingWith LCD screen displayAdjustable via a friction thumb rollerThe last point is memorized even if the unit is switched offPower on/off buttonLightweight and durableSupplied with carry caseSupplied with LR44 (1.5V) batteryMeasuring range: 0-150 mm / 0-6 inches Datasheet Data sheet
Incorporating the latest Multi-Stream Transport (MST) technology, the CS1922M 2-Port USB 3.0 4K DisplayPort MST KVMP Switch is the world's first DisplayPort KVM switch with a built-in MST hub. The CS1922M enables users to adopt two console displays from a single DisplayPort 1.2 video source, providing an extended desktop mode and splitter mode at resolutions up to 4K for multitasking across two displays while reducing bulky cable connections.To meet the ever-increasing demand for high-speed peripheral data transmissions, the CS1922M integrates a USB 3.1 Gen 1 hub to deliver unprecedented data transfer rates up to 5 Gbps - allowing you to maximize multitasking operations.The unique independent switching feature allows the KVM switch's focus to be on one computer while its USB peripheral focus is on another computer. This eliminates the need to purchase a separate USB hub or stand-alone peripheral sharer - such as a print server or splitter. Additionally, the switch allows you to share the audio from each of the connected computers and even allows HD audio transmitted through a DisplayPort source.With a rich feature set, the CS1922M is designed to exceed the requirements such as excellent video quality and ultra-fast data transmission speed for gaming, graphic design, animation, and video-editing applications.
Original part number NPP-C648CM-001 Product name Gembird 19" patch panel 48 port 2U cat.6 with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 48 Type of connector 1 x RJ45 Category 6 Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 89 mm Width 483 mm Depth 33 mm Net weight 1.3 kg Colour Black
Extend a PoE connection beyond the 100m limitIEEE 802.3af and IEEE 802.3at complianceEase of installation with no additional power supplyCompatible with all Axis network video productsIndoor use
Ubiquiti PoE POE-24-12W, 24VDC @ 0.5A, Fast Ethernet Accessory Name POE 24V - 12W Package Type Retail Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pieces in pack 1 Packs in Box 1
Original part number ISO-BEAM-620 Product name Ubiquiti IsoBeam ISO-BEAM-620 - Isolator Radome for 620 mm Dish Reflector Producer Ubiquiti Networks Class of product
TRENDnet’s TI-PG62B is a reliable IP30 unmanaged hardened DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit PoE+ ports, two dedicated SFP slots and a 12 Gbps switching capacity. Dual redundant 12 – 56 VDC power inputs and a power failure alarm relay.PoE PowerA 60 – 120 W PoE+ power budget supplies up to four Power over Ethernet devices.Fault Tolerance Features dual redundant 12 – 56 VDC power inputs with output alarm relay.Industrial Hardened DesignEquipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F). Network Ports 4 x Gigabit PoE+ ports and 2 x dedicated SFP slotsDIN-Rail / Wall Mounts IP30 rated metal enclosure with included DIN-rail and wall mount hardwareSwitching Capacity 12 Gbps switching capacityRedundant Power Dual redundant power inputs with overload current protection (power supply sold separately models: (model: TI-S12048)Alarm Relay Alarm relay triggered by power failure of primary and/or redundant powerJumbo Frame Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performanceExtreme Temperatures Industrial switch is rated for an operating temperature range of -40 – 75 °C (-40 – 167 °F)Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)Grounding Point Grounding point protects equipment from external electrical surges
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Original part number PP6U-5M/G Product name Gembird :UTP Cat6 Patch cord, 5 m, green Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Green
Original part number DN-82020-1 Product name DIGITUS Fast Ethernet Media Converter, SC / RJ45 Producer DIGITUS Class of product Media converter Network protocol and connector type 1 FastEthernet 100BaseTX - RJ45 Network protocol and connector type 2 FastEthernet 100BaseFX - SC Wiring type multimode fibre-optic cable62.5/125 (OM1)multimode fibre-optic cable 50/125 (OM2)UTP - unschielded twisted pair cable, 4 pairsFTP/STP - shielded 4 twisted-pair cable Height 25 mm Width 70 mm Length 93 mm Net weight 0.4 kg Additional information Distance up to 2kmAuto MDI/MDI-XAuto-negotiation of full- and half-duplexCan be mounted in 19" rackin bundle: external AC adapter
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
