mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
CRS328-24P-4S+RM CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included). CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STR / RSTP / MSTP• Access Control List• MikroTik neighbour discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• SNMP v2/v3• rackmount• IEEE 802.3ad and static link aggregation Switching resultsCRS328-24P-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-24P-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
The mANT LTE is an omnidirectional antenna specifically designed for LTE frequencies. It is an excellent companion to our LTE devices, such as the wAP LTE and LtAP series. The antenna has a 5 dBi gain, improving your connection in the areas with inadequate LTE service coverage, allowing you to increase your connection speed. Antenna gain5Beamwidth360°Connector2 x SMA femaleDiameter x Depth129 x 129 x 34 mmFrequency Range699 - 2690 MHzOperating Temperature-40°C .. +70°C tested
Using airMAX ac technology, the PBE-2AC-400 supports up to 330+ Mbps real TCP/IP throughput. Management Wi-Fi Radio The PowerBeam® 2AC 400 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam® 2AC 400 offers a more robust mount with a convenient lifting loop or handle.Integrated Radio Design Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.Plug and Play Installation The PowerBeam® 2AC 400 requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Tootja: Netgear Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 16 tk Toetatud protokollid ja standardid: IEEE 802.3af - Power over Ethernet, IEEE 802.3at - Power over Ethernet improvement, DSCP - DiffServ Code Point, Jumbo frame tugi, IEEE 802.1p Class of Service, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az - Energy Efficient Ethernet, IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3x - Flow Control MAC addresses: 4000 Switch fabric maht: 32 mälupuhver: 1 MB võrgukiht: andmed puuduvad arvutikorpuse tüüp: kerge Form Factor maksimaalne energiatarbimine: 200 vatti laius: 286 mm kõrgus: 27 mm sügavus: 102 mm Netokaal: 0.88 kg andmeleht: spetsifikatsioon [LINK]
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 2x10/100M, 64, 128-bit WEP, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Antenna Gain 5 dB, Number of antennas 2, Wireless Frequency Range 2.412~2.472GHz, Windows 10, Windows 8, Windows 7, Linux, MacOS, Windows XP, Windows Vista, Activity, Link, Power, Included Accessories Power Adapter, RJ-45 Ethernet Cable, Quick Installation Guide, Power supply requirements 5VDC / 0.6A, Dimensions 154 x 114 x 36mm
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
TRB245Small and durable industrial LTE Cat 4 Gateway equipped with a number of Input/Output Serial Ethernet ports. Number of features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial LTE Cat 4 Gateway TRB245 is equipped with GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features for an industry in one package: secure power connector I/O ports serial communication fast and reliable internet connection. TRB245 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of software features such as SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises.
USW-Flex-MiniUniFi Compact 5Port Gigabit Desktop SwitchBuild and expand your network with the UniFi Switch part of the Ubiquiti Networks UniFi Enterprise System. The UniFi Switch model USW-Flex-Mini is a smart managed Gigabit switch. It offers 5 RJ45 Ethernet ports providing 1 Gigabit links to your devices. Power up the USW-Flex-Mini with the USB Type-C power adapter (NOT included) or with 802.3af PoE Ethernet in port 1.5V 1A USB-C power adapter included only with the single-pack of the USW-Flex-Mini.
G4 PTZ is a superior surveillance camera for shopping centers parking lots airports train stations and other transportation hubs. Pairing G4 PTZ’s advanced optical and video technologies with UniFi Protect’s ease of use creates a unique solution for the most demanding environments. G4 PTZ comes with IP66 weatherproof casing and flexible powering options.Note: UniFi Protect is required to run this product with full functionality its recommended to use it with UniFi Dream Machine PRO or UniFi Protect Network Video Recorder.
