Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 48 Type of ühenduspesa: 48 x RJ-45 Category: 6 Wiring type: CAT6, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbered fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: must
Original part number U3METALGLAN Product name i-tec USB 3.0 Metal Gigabit Ethernet Adapter 1x USB 3.0 to RJ-45 LED Producer iTec Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type 1x female USB 3.0 A-type Plug 2 type 1 x RJ45 Other information Other information Colour Space Gray Additional information 1x USB 3.0 connector, for connecting to a laptop, tablet or PC1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speedsSupports Wake-on-LAN, Jumbo frame up to 9k bytes, detection of cable crossoverSupport IEEE 802.3az (Energy Efficient Ethernet)IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loadingChipset Realtek RTL8153Powered through USB bus, no power adapter is neededOS: Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS, Linux, Android More info i-tec USB 3.0 adapter metal Gigabit Ethernet
VDV & USB Cable Tester TC-NT3 (Version v1.0R) Comprehensive cable tester for network professionals Tests voice, data, video, and USB cables Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.) Identifies severed, short circuit, and cross connected pins Quick pass/fail for large test quantities Blinking Hub/Switch Mode identifies connected hub/switch port Convenient travel case TRENDnet’s VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Hardware Cables and Ports Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4, 6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan Manual scan is well suited for loop back cable testing Quick Test Mode Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port’s LED indicator to blink Cable Distance Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 5m
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Ethernet Connectivity Passive PoE (Pairs 4, 5+; 7, 8 Return)Management Wi-Fi Radio Each NanoStation AC loco model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
8 x Gigabit PoE+ ports 61W PoE budget 16Gbps switching capacity Sturdy metal switch Plug and Play installation Use with TRENDnet's PoE Splitter to network and power non-PoE devices The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking. PoE Power A 61W PoE power budget supports up to eight Power over Ethernet devices. Gigabit Ethernet Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations. Compact Design With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation. PoE Supplies up to 30W of PoE+ power per port with a total power budget of 61W. Supports both PoE (802.3af) and PoE+ (802.3at) devices. Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Sturdy metal housing LED Indicators LED indicators convey port status
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
The high quality Cat 6 patch cable from LogiLink is manufactured according to European standard EN 50173-1 as well as the international standard ISO/IEC 11801 It has 8 cores with a thickness of AWG 24/7 and is unshielded. The required cable length can be taken from a carton out of its opening and the remaining balance is thus protected from dirt and damage.
The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite2 retains a 10 dBi antenna like the SXT Lite2, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.The enclosure includes slots for directly attaching a hose clamp mount in three different mounting places, with ability to be mounted on horizontal railings. The device includes one 10/100 Mbit Ethernet port. There is also an easily accessilble grounding connection to protect it against lightning.Included parts
The active GPS antenna is the perfect companion for the LtAP mini, giving you the possibility to get accurate geographical coordinates of your router, even when it is mounted indoors. The long cable allows to bring the antenna outside and mount it with the included magnet, or double sided tape.The ACGPSA is a standalone active GPS antenna, specifically made for the 1575.4 MHz frequency used by GPS. The size of the antenna is 46.5 mm x 26.5 mm x 12.5 mm and is waterproof with IP67 rating. It has a long 5 m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).Specifications: Center frequency1575.42 MhzGain26 dBWater resistance100% waterproof (IP67)ConnectorSMACable5 m RG-174/U (standard)Standard mountingMagnetic baseDC voltages3 V +-0.3 VDC current8 mA maxDimensions46.5 x 46.5 x 12.5 mmWeight35 g, 120 g (with cable and connector)Operating temperature-40°C .. +85°C tested
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs, CAT5E Lisaandmed: bag of 10 tk kõrgus: andmed puuduvad laius: andmed puuduvad pikkus: andmed puuduvad
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
