Võrguseadmed

Intellinet Switch 24x GE Rackmount 2x SFP

Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Dual Ethernet Connectivity The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration.Management Wi-Fi Radio Each NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.

Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one)   QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support

8 x Gigabit ports 2 x SFP slots Supports 100/1000Base-FX fiber SFP modules 20Gbps switching capacity Hardened IP30 rated metal housing Includes DIN-rail mounting bracket Wide operating temperature range of -40° – 75° C (-40° – 167° F) Supports LACP, STP/RSTP, VLAN, and IGMP Snooping IEEE 802.1p QoS with queue scheduling support Bandwidth control per port Redundant power inputs with overload current protection Alarm output triggered by power failure Supports Ethernet Ring Protection Switching (ERPSv2) Power supply sold separately (model: TI-M6024) TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. Integration Flexibility Managed layer 2 features include VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration. Shock and Vibration Resistant The industrial layer 2 managed switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6). Industrial Design Equipped with an IP30 rated metal enclosure, the industrial layer 2 managed switch operates within a wide temperature range of -40° – 75° C (-40° – 167° F). Network Ports Gigabit ports for high-speed network connectivity and SFP slots for long distance fiber applications Traffic Management Layer 2 Managed features include 802.1Q, MAC & Port Isolation VLAN, IGMP Snooping, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP spanning tree, and link aggregation for flexible network integration Access Control Managed access control features include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping, and IP Source Guard provide the industrial layer 2 managed switches with layered network access controls System Monitoring Monitoring features include SNMP v1 / v2c / v3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, and SFP DDMI DIN-Rail Mount IP30 rated metal enclosure, includes DIN-rail mounting bracket for the industrial layer 2 managed switch Redundant Power Redundant power inputs with overload current protection (power supply sold separately) Alarm Relay Alarm relay output triggered by power failure of primary and / or redundant power to the industrial layer 2 managed switch Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance from the industrial layer 2 managed switch Wide Temperature Range A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions Shock and Vibration Resistant Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6) Grounding Point Grounding point protects equipment from external electrical surges on the industrial layer 2 managed switch

PLANET 1-Port 10/100/1000T Ethernet to VDSL2 Converter

8 x Fast Ethernet PoE+ porti 200W PoE võimsuse eelarve 1,6 Gbps kommutatsioonivõimsus Kaitsekindel IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba kinnitust ja seinakinnitusklambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-S24052, TI-S24048). TRENDneti tööstuslikel Fast Ethernet PoE+ DIN-riba lülititel on vastupidav IP30-klassi metallist korpus. Need tööstuslikud haldamata PoE+ lülitid on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama nii kõrgetel kui ka madalatel temperatuuridel tööstuskeskkondades -40° - 75° C (-40° - 167° F). Redundantsed toitesisendid koos ülekoormusvoolukaitsega igas tööstuslikus haldamata PoE+ kommutaatoris vähendavad võrgu seisakuid miinimumini. paigaldajad ja integraatorid saavad TRENDneti tööstuslike Fast Ethernet kommutaatorite abil säästa seadmete kulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE-toite ja andmeid ühe pordi kohta olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti, et edastada nii andmeid kui ka toitu tööstuslikust haldamata PoE+-kommutaatorist. Nende haldamata tööstuslike PoE+ kommutaatoritega saate hõlpsasti ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ- ja muid täiustatud IP-kaameraid, VoIP-telefonisüsteeme, IPTV-dekoodereid, juurdepääsukontrolli ja muud.     PoE+ võimsus 200 W PoE+ võimsuse eelarve varustab kuni kaheksa Power over Ethernet seadet PoE+ toiteallikaga.     Redundantne toide Kaks toitesisendit pakuvad ülekoormusvoolukaitsega redundantset toite ja väljundhäirereleed, mis annavad märku sisendtoite rikke kohta.     Tööstuskindel disain Varustatud vastupidava IP30 klassifikatsiooniga korpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F).         PoE+ toide Haldamata tööstuslikud PoE+ lülitid annavad igaüks kuni 30 W võimsust pordi kohta ja andmeid ühe Ethernet-kaabli kaudu PoE-seadmetele.     Lihtne paigaldus Ei ole vaja konfigureerimist, lihtsalt ühendage PoE+ võrguseadmed tööstusliku haldamata PoE+ kommutaatoriga.     Paigaldusriistvara IP30 klassifikatsiooniga metallist korpus koos DIN-riba ja seinakinnituse riistvaraga, mis on lisatud.     Redundantne toide Kaks sisendit tagavad üleliigse voolu kaitse (toiteallikas müüakse eraldi, mudel: TI-S24052, TI-S24048).     Lai temperatuurivahemik Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) võimaldab paigaldamist tööstuskeskkondades, kus on äärmiselt kuumad või külmad tingimused.     Löögi- ja vibratsioonikindlus Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6).     Elektromagnetiline vastavus Vastutab 6kV | õhk: 8kV, (IEC 61000-4-4) EFT: võimsus: 2kV | signaal: 2kV, (61000-4-5) ülepinge: Võimsus: 2kV | Signaal: 2kV

LANBERG patchcord cat.5e 30m black

CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.