Tootja: Fluke võrguseades Tootegrupp: tööriist/tester tööriista tüüp: tester Standard tarvikud: andmed puuduvad Lisaandmed: Features, Revolutionary liides – graphical wiremap, pikkus, kaabel ID, ja distance to fault displayed on one screen, Multimedia tugi - tests all common Meediatüüps including RJ11,, RJ45, Coax, koos no need for adapters, IntelliTone Toning – locates virtually any kaabel või wire pair koos digital, IntelliTone ja analog toning, VDV Service Detection - verifies today’s media services, including 10/100/1000, Ethernet, POTS, ja PoE, Rugged Housing – integreeritud kummist holster enhances grip and, makes it durable enough for the toughest jobs, Equipment:, MicroScanner2 Professional Kit include värv: kollane/sinine andmeleht: Website
Tootja: Fluke võrguseades Tootegrupp: tööriist/tester tööriista tüüp: Tester Lisaandmed: Location of single ja multi-pair copper kaablid, It is equipped koos an RJ11 ühenduspesa ja a pair of crocodile Ühendusi (2)., kaablid permanently attached to the tone generator, Precise search of single pairs in kaabel bundles, (work in analog mode), Elimination of interference ("humming") by filtering interfering signals (50Hz), which allows you to hear the search signal loud ja clear, Location of kaablid not longer than 16 km, Instant kaabel location from a large distance, even in an active võrguseade, Telephone võrguseade detection (LED indicating continuity / polarity)., Pro3000F equipment (FL-PRO3000F50-KIT):, Generator Pro3000 Analog Tone Generator (FLH-26200900), Pro3000F (50Hz) tone probe Analog Probe (FL-PRO3000F50), cover for the tester värv: kollane/sinine andmeleht: http://shop.assmann.pl/katalog/produkt
Small and sleek, yet powerful, the 802.11ac 4x4 AP is ideal for enterprises, businesses, and homes. The modern yet discreet design allows placement near users for optimal performance.Features: 802.11ac Wave 2 Technology 5 GHz Radio: 802.11ac Wave 2, 4x4 MU-MIMO with Radio Rate of 1.733 Gbps 2.4 GHz Radio 802.11ac: 2x2 MIMO with Radio Rate of 300 Mbps Indoor and Outdoor Use Tabletop, Wall, and Pole Mounting Brackets Included Seamless Integration and Management with UniFi Network Solution
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
FMB140 is an ADVANCED GSM/GNSS/Bluetooth tracker with integrated CAN data processor. It is compact 2 in 1 solution: GPS tracker and CAN adapter inside! Device allows to read CAN data from a wide range of various vehicles, including light & electric vehicles, trucks, buses and special machinery. Depending on exact software version FMB140 can be used in advanced applications as heavy logistics, delivery services, utility transport. Two options available to fulfill any business demands: LV-CAN200 option – default software version with LV-CAN200 parameters, including fuel level, consumption, odometer, CAN speed, pedal position, Supported vehicle types: light vehicles, trucks, buses. ALL-CAN300 option* – advanced software version allows to read more parameters than default version. Available additional parameters include AdBlue level, engine lifetime, airbag. Supported vehicle types: light vehicles, trucks, buses + electric vehicles, agriculture, construction, forest, utility & special machineries. FMB140 supports Bluetooth 4.0 LE protocol, which lets you connect various external devices and Bluetooth low energy sensors. New device is a major improvement for telematics with easier installation and flexibility to choose proper set of features without a change of hardware. MODULE Technology GSM/GPRS/GNSS/BLUETOOTH GNSS GNSS GPS, GLONASS, GALILEO, BEIDOU, QZSS, AGPS Receiver Tracking: 33 Tracking sensitivity -165 dBM Accuracy < 3 m Hot start < 1 s Warm start < 25 s Cold start < 35 s CELLULAR Technology GSM 2G bands Quad-band 850 / 900 / 1800 / 1900 MHz Data transfer GPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class B Data support SMS (text/data) POWER Input voltage range 10 - 30 V DC with overvoltage protection Internal Back-up battery 170 mAh Li-Ion battery 3.7 V (0.63 Wh) BLUETOOTH Specification 4.0 + LE Supported peripherals Temperature and Humidity sensor, Headset, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support PHYSICAL SPECIFICATION Dimensions 65 x 56,6 x 20,6 mm (L x W x H) Weight 55 g OPERATING ENVIRONMENT Operating temperature (without battery) -40 °C to +85 °C Storage temperature (without battery) -40 °C to +85 °C Operating humidity 5% to 95% non-condensing Ingress Protection Rating IP41 Battery charge temperature -0 °C to +45 °C Battery discharge temperature -20 °C to +60 °C Battery storage temperature -20 °C to +45 °C for 1 month-20 °C to +35 °C for 6 months INTERFACE Digital Inputs 3 Negative Inputs 1 (Digital Input 2) Impulse Inputs 2 (Digital Input 1, Digital Input 2) Digital Outputs 2 Analog Inputs 2 CAN interfaces 2 1-Wire 1 (1-Wire data) GNSS antenna Internal High Gain Cellular antenna Internal High Gain USB 2.0 Micro-USB LED indication 3 status LED lights SIM Micro-SIM + eSIM Memory 128MB internal flash memory FEATURES CAN Data Fuel Level (Dashboard), Total fuel consumption, Vehicle speed (wheel), Vehicle driven distance, Engine speed (RPM), Accelerator pedal position Sensors Accelerometer Scenarios Green Driving, Over Speeding detection, Jamming detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip Sleep modes GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep Configuration and firmware update FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration) SMS Configuration, Events, DOUT control, Debug GPRS commands Configuration, DOUT control, Debug Time Synchronization GNSS, NITZ, NTP Ignition detection Digital Input 1, Accelerometer, External Power Voltage, Engine RPM
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
Jätkukaableid kasutatakse telekommunikatsioonivõrkudes ning kiiretes linna- ja juurdepääsuvõrkudes. Jätku toodetakse IEC, EIA TIA või Telcordia standarditest tulenevatele nõuetele vastavate LSZH kaablite baasil. Täiustatud kaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
PL7400 is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL7400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a 100Mbit (max) connection without needing to install any LAN cables.Comes with Type C power plug (commonly used in Europe, South America and Asia)IMPORTANT!To enable PWR-LINE functionality, MikroTik device will need to have RouterOS v6.44 or newer software version installed. Please note that PWR devices must be connected via the same electrical phase circuit.Supported deviceshAP lite (RB941-2nD), hAP lite tower (RB941-2nD-TC), hAP mini (RB931-2nD), mAP (RBmAP2nD) and mAP lite (RBmAPL-2nD). The device is also fully compatible with our PWR-LINE AP devices.How it workThe PWR-LINE is a replacement power adapter for your microUSB powered MikroTik router. It’s compatible with all the latest microUSB powered devices made by MikroTik, a simple software upgrade to v6.44+ enables this feature (supported by the mentioned devices with serial numbers that ends with /9xx. PWR-LINE functionality is also supported by some of previously manufactured units - if you have unit with serial number that ends with /8xx , upgrade to 6.44 and see if PWR-LINE interface shows up). Simply take away the old microUSB power adapter, and replace it with the PWR-LINE adapter. The device is still powered from USB, but now it gains a new Ethernet interface, which works over the electrical grid. Connect another PWR-LINE device somewhere in your apartment, and the devices will be joined together, allowing you to extend wireless coverage, or simply ease connectivity between different rooms, without requiring you to lay any cabling.
