SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
5GHz, 29.4x8x3cm, 16dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 16dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
5-Port 10/100Mbps Desktop Switch Five 10/100Mbps auto-negotiation RJ45 ports with auto MDI/MDIX supportedEasily wired network expansionCompact design for flexible arrangementPlug and play setup, no configuration required
Industrial LTE Cat 1 Gateway Board TRB145 is equipped with RS485 Interface, Digital Inputs/Outputs and micro-USB port. TRB145 compact design makes this Gateway perfect for an application where a sole gadget must be remotely controlled over RS485 interface. TRB145 is engineered to be used in Industrial applications therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.HardwareMobileLTE(Cat1)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTERS485Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200Input/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketOptional power sourcePossibility to power device over 6 pin RS485 connector’s spare terminals.Configuration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)RS485 related servicesModbus, Serial over IP, NTRIPRemote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight30 g
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz
Tüüp: Kommutaator (Switch); Side tüüp: 10 / 100 / 1000 Mbps; Printserver: Ei; Juhtmevaba side standardid: Ei; SIM-kaardi pesa olemasolu: Ei; Liides LAN (RJ-45): On; USB 2.0 liides: microUSB; WAN-port liides: Ei; Portide arv: LAN x 24, SFP+ x 4;...
AC1900 Whole Home Mesh Wi-Fi System - One Unified Network – With advanced Mesh Technology, Halo units work together to form a single unified whole-home network with one WiFi name and password. - Seamless Roaming – Automatically switch between Halos as you move around your home, always getting the best signal to enjoy the fastest connections for all your devices. - Whole-Home Coverage – Blanket up to 350 m² with high-speed WiFi, eliminating WiFi dead zones at your home. - 1.9 Gbps Dual Band WiFi – Halo H50G provides fast and stable connections for over 100 devices with speeds of up to 1,900 Mbps and works with major internet service providers (ISPs) and modems. - Easy App Control – Use the MERCUSYS App to quickly set up and manage your WiFi. - Full Gigabit Ports – 3× Gigabit ports per Halo unit for lightning-fast wired connections
Omada | Type Wireless Access Point | Data transmission speed 3000 Mbps | IEEE 802.11a/b/g | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax | 1x10/100/1000M | Wireless Frequency Range 2.4 GHz and 5 GHz | Included Accessories EAP653 UR Ceiling/Wall Mounting Kit Installation GuideNote: DC adapter is not included in the package, and is sold separately. | Power supply requirements 12V DC / 1.5 A (Power Adapter IS NOT included) ; 48V Passive PoE | Colour White | Dimensions 160 160 33.6 mm
Mikrotik wanted to see the full potential of the good old reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004 this router features the mighty Amazon Annapurna Labs Alpine CPU.But with 16 cores running at 2 GHz this CCR eats the other one for breakfast. For example Mikrotik see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family!Obviously you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate full-duplex line connected to the Marvell Amethyst family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU for management purposes.Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups.The new generation of processors offers mind-blowing performance. If you look at the CCR1036 — the powerhouse with a 36 core CPU the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. There is also an M.2 PCIe slot. It supports SSD`s up to 8 terabytes. This could be extremely useful for all kinds of Container apps.If you are a rather large ISP dealing with dynamic routing massive BGPs complex firewall rules and intricate quality of service configurations.This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes like with any ISP-level device Mikrotik have included a dual-redundant power supply. So you have one less thing to worry about.
RUT142 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud RS232 jadaliidese, kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil, tagab see tõrgeteta ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstuslikke protokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga, et tagada tõhus kaug- ja kohapealne juhtimine.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4JADALIIDESRS232 jadakommunikatsiooniksTÖÖSTUSLIK DISAINIntegreeritud DIN-riba klamber ja 3-poolne toitepistikRMSKaugjuhtimine, juurdepääs ja VPN-teenused
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
The TP-Link Omada EAP673 V1 is a wireless access point designed to meet the demands of modern businesses and high-density environments. Offering Wi-Fi performance with Wi-Fi 6 technology, this device supports a data transfer rate of up to 5378 Mbps, ensuring smooth and efficient operation. It can handle over 250 concurrent clients, making it perfect for large gatherings or busy workplaces.Security is a top priority for any network, and the EAP673 V1 excels in this area. It features the WPA3 encryption standards, along with multiple authentication methods, to protect sensitive data from unauthorized access. Additionally, its cloud-managed capability allows for effortless setup, management, and updates, ensuring your network remains robust and secure.Designed for versatility, the TP-Link Omada EAP673 V1 is suitable for wall or ceiling mounting, allowing for optimal placement and coverage. Its robust design is complemented by features such as MU-MIMO technology, beamforming, and seamless roaming, which together provide a superior wireless experience. Whether you're upgrading your office network or setting up a new one, the EAP673 V1 is a powerful and reliable choice.
The TP-Link Omada EAP625-Outdoor HD V1 is a wireless access point designed to provide robust, high-speed Internet connectivity in outdoor environments. This device is equipped with Wi-Fi 6 technology, ensuring fast data transfer rates of up to 1.8 Gbps and support for over 1000 concurrent clients. Its rugged design is IP67 rated, making it waterproof and weatherproof, suitable for any outdoor setting.With advanced security features including WPA3 encryption and multiple authentication methods, the EAP625-Outdoor HD V1 ensures a secure network environment. It also offers efficient network management through Omada Mesh technology, seamless roaming, and cloud management capabilities, allowing for easy network expansion and maintenance. Whether for a cafe terrace, an outdoor pool area, or a campus courtyard, the TP-Link Omada EAP625-Outdoor HD V1 is a suitable solution for extending high-performance wireless access to the great outdoors.
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-60W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-60W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
MT110 4G LTE Mobile Wi-Fi - More Connections: Share with friends internet access for up to 10 devices simultaneously - Long usage: 2200 mAh battery for 10 hours - 4G Network: Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions, and enjoy download speeds of up to 150 Mbps - 150 Mbps WiFi: Fast WiFi speeds up to 150 Mbps to share your network - SIM Card Plug and Play: Go anywhere and connect everywhere easily - Easy App Control: Management with the MERCUSYS App
