CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6a UTP Slim Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Flat Cables are composed of 4 twisted pair 32 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
With the UniFi In-Wall HD Cover the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack. * - UniFi In-Wall HD AP sold separately!
Der Cisco Compatible SFP-10G-LR SFP+/LR SFP-Transceiver ist ein Erweiterungsmodul für Cisco Switches. Der Cisco Compatible SFP-10G-LR SFP+/LR unterstützt den 10 Gigabit-Standard auf einer Reichweite von bis zu 10 Kilometer und kann dank Hot-Swap-Fähigkeit während des Betriebes ein- und ausgebaut werden.
"Ever Eco Pro 1000 AVR CDS 19" 2U on väga tõhus ja usaldusväärne katkematu toiteallikas (UPS), mis on mõeldud pideva toiteallika tagamiseks ja kriitiliste seadmete kaitsmiseks ootamatute elektrikatkestuste eest. See on kavandatud nii, et see sobib ideaalselt tavalistesse 19-tollistesse serveririiulitesse tänu oma mugavale 2U vormifaktorile, mis võimaldab optimaalset ruumikasutust andmekeskuses või IT-infrastruktuuris. Selle UPSi mudeli võimsus on muljetavaldav 1000VA, mis on piisav paljude kriitiliste seadmete, näiteks serverite, võrguseadmete või tööjaamade toetamiseks. Automaatne pingereguleerimise (AVR) tehnoloogia tagab, et mis tahes sissetulev pinge on reguleeritud ohutule tasemele, vältides võimalikke üle- või alajõe tekitatud kahjustusi. Juhtimis- ja diagnostikasüsteem (CDS) pakub olulisi seirefunktsioone, mis võimaldavad kasutajatel sujuvalt jälgida elektritingimusi ja aku seisundit, tagades, et nad on alati teadlikud süsteemi toimimisest. "Ever Eco Pro 1000 AVR CDS on ideaalne ettevõtetele, kes seavad prioriteediks tõhusa energiakasutuse juhtimise ja seadmete kaitse, ning see on oluline komponent, mis aitab säilitada äritegevuse järjepidevust ja vähendada ootamatutest elektrikatkestustest tingitud andmekaotuse või riistvararikke riski.
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
Der DMG-31 von PowerOn verbindet Desktops mit einem High-Speed WLAN-Netzwerk. Er ist kompatibel mit den 802.11a/b/g/n (WiFi 4) Standards und erreicht Geschwindigkeiten von bis zu 300 Mbit/s bei 2,4GHz über einen freien PCIe x1 Port. Die zwei leistungsstarken 3dBi Antennen sorgen nicht nur für einen ordentlichen Datendurchsatz, sondern gewährleisten auch eine unterbrechungsfreie Datenübertragen auf größere Distanzen.
• 250 Watt power supply unit • Improved failover of the LANCOM XS-5116QF, LANCOM XS-6128QF, LANCOM GS-4554X, or LANCOM GS-4530X • Hot-swappable – can be inserted during operation • Input voltage: 110 VAC and 230 VAC • Output voltage: 12 V @20 A • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C • Not suitable for operation in ambient temperatures below -40°C and above 70°C
• 1-port PoE injector with multi-Gigabit Ethernet support • Supports the PoE standard IEEE 802.3af/at/bt up to 65W • Power supply through up to 100m of Ethernet cable • Support of link speeds of up to 5 Gbps • Easy plug & play installation
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
8 x Gigabit PoE+ porti 65W PoE võimsuse eelarve 16Gbps kommutatsioonivõimsus IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne ventilaatorita disain Seinale paigaldatav metallist korpus TRENDneti 8-portiline Gigabit PoE+ kommutaator, mudel TPE-TG83, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toitu olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. See kompaktne võrgukommutaator pakub kaheksat gigabitilist PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W. TPE-TG83 PoE+ kommutaatoriga saab ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Sellel on ventilaatorita disain ja mugav võimalus seinale paigaldamiseks. PoE+ 65 W PoE-võimsuse eelarve toetab kuni kaheksat Power over Ethernet seadet.
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 5 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
This ergonomical designed soft mouse pad by Delock acts due to its wrist rest relieving when working with a mouse. With its smooth filling the ball of the hand lays comfortable on the mouse pad. Specification • Flexible soft mouse pad • Wrist rest • Rubberized bottom • Dimensions (LxWxH): ca. 245 x 206 x 20 mm • Weight: ca. 108 g • Colour: grey Package content • Mouse pad
wAP LR2 kit Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
UDC-1 cables for uplinks between the UniFi switch and the SFP ports.1Gbps or 10Gbps capacitiesThe cable is copper and incorporates SFP modules.Designed for UniFi switches to chain between communication cabinets/boxes.SFP+ 10G passive copper cables can be used for short distance 10Gbps transmission. Transceiver cables are perfect solution for a server room applications.
RG-RAP2260(G) Reyee Wi-Fi 6 AX1800 Ceiling Access Point Build ultra-fast network with Wi-Fi 6 technology. Client connections over 500, better multi-user experience. Provide higher practical performance for users as well. Easily install extra AP with Reyee Mesh technology. Set up Wi-Fi 6 network in 3 minutes with Ruijie Cloud APP.
