300Mbps Wireless Broadband Router•Complies with wireless 802.11b/g/n standards•Wireless speed up to 12 times faster and coverage 5 times further•Built-in hardware WPS (Wi-Fi Protected Setup) button•Includes EZmax multi-language setup wizard for Internet connection, wireless settings, and firmware upgrade•Supports WMM, WEP, WPA, WPA2, DDNS, QoS, IP/MAC filter, DMZ, and virtual server
Extends keyboard, mouse, and monitor distances up to: 150m (490ft.) at 1280 x 1024 resolution and 100m (328ft.) at 1600 x 1200 resolution Controls multiple servers remotely when used with a KVM switch Displays high quality resolution up to 1600 x 1200 pixels Provides local and remote console ports to access one computer Connect the local console (transmitter) to the remote console (receiver) with an Ethernet cable Cat. 5, Cat. 5E or Cat. 6 Ethernet cable compliant Fine-tune resolution on the remote consoles viewing monitor, with Gain (resolution adjustment) and Equalization (contrast correction) PS/2 and USB interface support for loca console (transmitter) USB interface support for remote console (receiver) Data and power LED indicators Supports Windows, Mac, and Linux operating systems No driver or software installation required 2-year limited warranty
8+2G SFP all-in-one Firewall/NAT/VPN*/router/switch Firewall with quick automation profile for industrial protocols Deep Modbus TCP packet inspection for firewall filtering NAT supports N-to-1, 1-to-1, and port-forwarding deployment Flexible configuration of multiple WAN and LAN ports 20 VPN connections for secure remote management (VPN model) -40 to 75°C operating temperature range (T model) NERC CIP compliance * VPN model will be available in Q3, 2013
3m Cat.6 U/UTP Network Cable, Blue Cat.6 U/UTP PVC network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250MHz. The unshielded version (U/UTP) can be used for Gigabit Ethernet thanks to the special design of the electrophysical parameters (NExT, FExT, etc.) despite the lack of shielding. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
Jätkukiud on saadaval nii ühemoodilisi (SM) kui ka mitmemoodilisi (MM). Ühemoodilised jätkukiud vastavad standardile OS2 ning mitmemoodilised standarditele OM1, OM2, OM3 ja OM4. Poleeringu tüübid on ühemoodilistel jätkukiududel UPC või APC ning mitmemoodilistel üldjulul PC. Jätkukaablid on varustatud optimaalset optilist tulemust tagavate optimeeritud konnektorite/ühendusotsikutega.
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
This braided sleeve by Delock can be used to bundle exposed cables, electrical tubes or wires to protect them from dirt or damage. Stretchable The braided sleeve is very stretchable, which allows multiple cables with different diameter to be accommodated. Brilliant resistance The braided sleeve is characterized by its abrasion resistance and heat resistance. Reusable The cables and tubes can be added or removed multiple times. Cuttable A hot cutting tool can help to shorten the length of the braided sleeve individually. Specification • Length: ca. 5 m • Diameter: ca. 12 mm • Cable diameter: min.: 8 mm max.: 24 mm • Environmental temperature: -40 °C ~ 125 °C • Reusable • Material: polyester • Fire-resistance rating: 94V-2, VW-1 • Colour: white
This cable duct by Delock can be used to bundle and conceal exposed cables, to protect them from dirt or damage. Toolless assembly The cable duct is provided with an adhesive tape on the bottom and can therefore be easily and simply attached e.g. to the floor, wall, window frame or baseboard. The adhesive tape also ensures a firm and secure hold. Plenty of space for different cables Depending on the diameter and thickness of the individual cables e.g. antenna cables, HDMI cables, audio cables or power cables can be accommodated. Thus the cables are safely and orderly stowed away. Reusable The upper part of the cable duct can be easily removed by sliding it out to add or remove cables. Specification • self-adhesive • Reusable • Individually shortenable • Environmental temperature: -40 °C ~ 65 °C • Material: PVC • Colour: black • Dimensions (LxWxH): ca. 1000 x 30 x 8 mm Package content • Cable duct
Neid Delocki roostevabast terasest valmistatud kaablisidemeid saab kasutada üksikute kaablite, juhtmete ja torude ruumi kokkuhoidlikuks komplekteerimiseks. Spetsifikatsioon - Pikkus: ca. 150 mm - Laius: ca. 10 mm - Kogus: 20 tükki polü koti kohta - Korduvkasutatav - Materjal: roostevaba teras SS316 - Tõmbetugevus: kuni 120 kg Pakendi sisu - Kaablisidemete komplekt
Seda traadita LAN-antenni saab ühendada RP-SMA-liidesega WLAN-seadmega, et saata ja vastu võtta signaale. Spetsifikatsioon - Liitmik: RP-SMA pistik: RP-SMA pistik - Sagedusvahemik: 2,400-2,500 GHz - Antenni võimendus: 5 dBi - Impedants: 50 Ohm - Polarisatsioon: lineaarne, vertikaalne - VSWR: 2,0 - Töötemperatuur: -10 °C ~ 55 °C - Korpuse materjal: ABS - Värv: must - Pikkus: Pikkus: ca. 200,30 mm (koos kallutusliigendiga) ca. 167,80 mm (ilma kallutusliigendita) - Läbimõõt: ca. 6,00 mm (ülevalt) ca. 13,20 mm (RP-SMA) Süsteeminõuded - Vaba RP-SMA-pistikupesaga seade Pakendi sisu - WLAN-antenn
Seda Delocki klemmiplokkide adapterit saab kasutada paljaste juhtmete ühendamiseks. Seega ei ole adapter mugav mitte ainult spetsiaalsetes tööstuslikes rakendustes, vaid ka hobi valdkonnas, nt raudteemudelisatsioonis. Spetsifikatsioon Liitmikud: kruvidega 1 x jada D-Sub 9 isendiga 1 x 9-pooluseline klemmiplokk koos surunupuga Pinnide määramine: 1:1 Pitch: 2,54 mm Kasutatav kaabli mõõtmetega 26-20 AWG Töötemperatuur: -20 °C ~ 70 °C Mõõtmed (LxSxK): ca. 36 x 31 x 17 mm Süsteeminõuded Vaba 9-pooluseline D-Sub-liitmik Pakendi sisu Adapter
Seda Delocki USB-kaablit saab ühendada emaplaadi vabale USB 2.0 piniotsikule ja laiendada süsteemi ühe USB A emasportiga. Kaabel sobib kõige paremini isetehtud arvutisüsteemidele. Spetsifikatsioon Pistikud: 1 x 4-poolne USB 2.0 viigupesa emasliitmik > 1 x USB 2.0 Type-A emane Pitch: 2,54 mm Kaabli gabariit: 28 AWG Kaabli läbimõõt: ca. 3,5 mm Kontaktid kullatud Andmeedastuskiirus kuni 480 Mbit/s Värv: must Pikkus koos pistikutega: ca 60 cm Süsteeminõuded Vaba 2,54 mm USB 2.0 pistikupesa Pakendi sisu USB-kaabel
Eriti lühikesed pistikud, puhas vaskjuht (CU), LSZH, TPE kestaga, AWG 32Omaette CATegooria: Ülilihtsad CAT-kaablid koos eriti lühikeste pistikutega vähendavad drastiliselt materjali mahtu serverikappides ja ühenduspaneelides - see parandab oluliselt õhuringlust ja vähendab soojuse tekkimist võrreldes tavaliste kaablite puhul. Lisaks sellele tagavad pehme TPE-kest ja õhukesed vaskjuhtmed erilise paindlikkuse ja materjalitõhususe, mis muudavad selle kaablipõlvkonna täiuslikuks võrgukaaslaseks.Üliõhuke LAN-kaabel eriti lühikeste RJ45-pistikutega, mis vähendab kaabli mahtu serverikapis või patch-paneelis, mille tulemuseks on optimeeritud õhuringlus.Ohutu ja paindlik: Ilma keerdpaari varjestuseta ja vähese suitsuga, halogeenivaba TPE-kestaga, mis tagab eriti väikese paindumisraadiuse ja suure paindlikkuse.AWG 32 ja 3,8 mm välisläbimõõduga kaabel on ülimalt õhuke, kuid sama võimas kui tavaline CAT-kaabel.CAT 6A võrgukaabel sobib ideaalselt selliste kiirete ühenduste jaoks nagu 10 Gigabit Ethernet 10GBASE-T, 100BASE-TX, 1000BASE-T ja 10/100/1000/10000 Mbit/s.RJ45 kaabel sobib Power over Ethernet (PoE, PoE+) ja CAT 6A testitud (tarnitakse koos individuaalse mõõtmisprotokolliga).Kvaliteetne vaskjuht (CU) ja kullatud pistikukontaktid tagavad madala ülekandetakistuse ja hoiavad ära korrosiooniKompaktne murdumiskaitse takistab tõhusalt kaabli purunemist ja tagab Ethernet-kaabli pika kasutusajaTooted on märgistatud ainult pabersildiga, kilekotte ja plastist kaablisidemeid ei kasutata.Vastavad kehtivatele IEC ja ISO standarditele:IEC 60332-1: tulekindlusIEC 61034: vähese suitsugaIEC 60754-2: HalogeenivabaISO 11801: Fluke'i kanalitest: kanal + PoE
Delocki pimekate sobib paigaldamiseks 19-tollisesse võrgukappi. See sulgeb võrgukapi avatud alad.Tehnilised andmedPaigaldamiseks 19-tollisesse võrgukappi, 2UVärv: hallMaterjal: metallMõõtmed (PxLxK): u. 483,0 x 88,5 x 11,5 mmPakendi sisu19-tolline pimekate4 x kruvi4 x puuritud mutter4 x alusplaat
A powerful and flexible KVM over IP product contained within a palm sized unit, the AdderLink IPEPS enables computer access from anywhere in the world, securely, locally and remotely via the Internet or corporate network. The AdderLink IPEPS-DA features local console access and, for IP access, uses Real VNC client software that is specifically designed for secure, high performance KVM over IP applications. Despite its small size, there is no compromise in the performance of the AdderLink IPEPS. By using Adventiq Inside on-chip KVM over IP technology, an extremely high performance solution can be contained in a compact unit. For Enterprise KVM solutions the AdderLink IPEPS provides a non-blocking global solution by providing each computer with a dedicated KVM over IP engine. This can be enhanced by using the ADDER.NET Enterprise Management Software that provides a centralised and secure user access management interface. This platform independant device is ideal for server hosting companies who wish to offer KVM via IP services to their customers. Increasing numbers of computers are being used in remote, stand alone applications such as ATMs and digital signage play out devices. The incredibly small size of the AdderLink IPEPS makes it perfect for remote management and control of dispersed computers, meaning that many tasks that would have required an expensive site visit can now be done from anywhere. PEPS DA model has feed through port that provides local KVM console access Interface powered, optional external PSU available Independent operation gives full control even during boot up, BIOS level or computer crash states USB or PS/2 keyboard and mouse connections Virtual media support (via USB) High performance video Enterprise grade security (using AES 128 bit encryption and RSA 2048 bit public key authentication) further enhanced by the use of Real VNC that allows for the creation of ciphered user communications. 16 user profiles and access data logging Up to 16 units can be rack mounted in 2U of rack space Supp
Revolutionary, Cost/Performance Breakthrough Carrier Class, 5GHz AirMax 2x2 MIMO Basestation Sector Antennas.Adjustable 60-120 Degree 5 Ghz MIMO 19-21 dbi Sector cablePowerful airMAX™ BaseStation PlatformBuilding upon our market-leading Rocket™ series, the Rocket™M Titanium features enhanced radio perfomance and superior durability. Thoughtfully engineered with Gigabit Ethernet, RocketM Titanium models achieve massive throughput increase along with unleashed speed. Its Carrier-Class capabilities link distances up to 50+ km and provide breakthrough speed of up to 150+ Mbps real TCPI/IP throughput.The RocketM Titanium enclosure was specifically designed to improve performance in harsh RF environments and in extreme weather conditions. Enclosed in aircraft-grade aluminum, the RocketM Titanium is a rugged, high-power, linear 2x2 MIMO radio.Rocket devices may be deployed in PtP bridging or PtMP airMAX BaseStation applications. They can be paired with your choice of airMAX BaseStation™ Sector or RocketDish™ antennas. This versatility gives network architects unparalleled flexibility and convenience.Intelligent QoS Priority is given to voice or video for seamless streaming.Scalability High capacity and scalability.Long Distance Capable of high-speed links up to 50+ km.Latency Multiple features dramatically reduce noise.GPS Synchronization*RocketM5 Titanium units have integrated Ubiquiti airSync™ technology. airSync enhances the hardware and software of the Rocket to utilize GPS signals for precision timing.GPS Signal Reporting airOS™ was upgraded to take full advantage of the new GPS hardware in Rocket GPS units. Easily manage and monitor GPS satellite signals.No Co-Location Interference Synchronized transmission among Rocket GPS powered BaseStations effectively eliminates co-location interference.External GPS Antenna The RocketM5 Titanium includes a weatherproof external GPS antenna.**Antenna with Rocket Accessories – Rocket not included.
Fluke 561 IR- ja kontakttermomeeterHVAC/R insenerile või tehnikule mõeldud Fluke 561 IR- ja kontakttermomeeter ühendab ühes tööriistas temperatuuri mõõtmise funktsioonid, mida tööstus-, elektri- ja HVAC/R spetsialistid vajavad. See mõõdab nii infrapuna- kui ka kontakttemperatuuri, asendades mitmeid teisi katseseadmeid. See on kiire, tõhus ja lihtne kasutada, säästes teile väärtuslikku aega ja vaeva. Fluke 561 infrapunatermomeetriga saate mõõta ka kontakt- ja ümbritseva keskkonna temperatuuri teile kõige paremini sobival viisil. Kasutage kontaktivaba lasertermomeetrit kuumade, liikuvate, elektrivoolu all olevate ja raskesti ligipääsetavate objektide koheseks mõõtmiseks. Kontrollige mootoreid, isolatsiooni, kaitselüliteid, kiirguskütet, torusid, korrodeerunud ühendusi ja juhtmeid. Lisaks skaneerige kanalid ja muud raskesti ligipääsetavad objektid põrandalt - jätke redel autosse. Võite kasutada Fluke 561-i mugavat paindlikku torusondi või ühendada mis tahes K-tüüpi miniliitmikuga tööstusstandardi termopaari sondi, mis teil juba olemas on, et mõõta ülessoojuse või sisetemperatuuri.Omadused ja eelised:- Kaks ühes termomeeter IR ja K-tüüpi termopaar- Velcro torusondiga kaasas- Lasersihik- LCD-taustvalgustusega ekraan- 3 astmeline emissioonitugevuse reguleerimine (madal, keskmine ja kõrge)- Kerge ja vastupidav- Min, Max ja Diff mõõtmisfunktsioon- Temperatuurivahemik -40 kuni 550C- Kaugus punktist 12:1- Täpsus +/- 1% näitest või +/-1Deg C. Alla 0 +/- 1 Deg C +/- 0,1Deg/1Deg C.- Ühildub standardsete K-tüüpi anduritega- Sisaldab kasutusjuhendit ja kandekottiKui täpsed on infrapunatermomeetrid?Enamikul IR-termomeetritel on mõõtmisvea spetsifikatsioon, mis näitab nende parimat täpsust. Täpsust võib mõjutada ka mõõdetav pind. Peegeldavad objektid annavad tegelikust temperatuurist madalama mõõtmistulemuse, samas kui mittepeegeldavad pinnad annavad kõrgema mõõtmistulemuse. Pinna emissioonitegur näitab, kui tõhusalt kiirgab ta energiat soojuskiirguse kujul, mistõttu on mõnedel IR-thermomeetritel reguleeritav emissioonitegur.Ka kauguse ja punkti suhe on samuti oluline täpsete temperatuurimõõtmiste tegemisel, sest kui infrapunatermomeeter on sihtkohale liiga lähedal, võib seadmes tekkida soojus. See võib anda valesid näitusid või kahjustada temperatuuriandureid, mistõttu on oluline alati järgida tootja juhiseid.FLUKE infrapunatermomeetri komplekt, ±1% parim täpsus, 500 ms reageerimisaeg - FLUKE-561Koguge kõik vajalikud temperatuurinäitajad ühe mugava vahendiga, kasutades selle FLUKE paketi infrapunatermomeetrit. Seda saate kasutada nii infrapuna- kui ka kontakttemperatuuri mõõtmiseks, nii et te ei pea kaasas kandma mitut komplekti. LCD-taustvalgustusega ekraanil on mõõtmistulemused hõlpsasti nähtavad, isegi hämarates tingimustes. Absoluutse temperatuuri mõõtmisvahemikuga vahemikus -40°C kuni +550°C on see ideaalne universaalne seade kogu tööoperatsiooni hõlmavaks järelevalveks. Koos termomeetriga saate kaasa velcro-torusondi, rakendusjuhendi ja kaitsekoti lihtsaks kandmiseks.Omadused ja eelised- ±1% täpsus näitude jaoks, millele võite loota- Kiire reageerimisaeg 500 ms ei lase teid hätta jääda- 0,1 °C eraldusvõime sobib täpsemõõtmisteks- 340g kaal, seega on see väga kaasaskantav lahendus- Mitmekülgsete rakenduste jaoks on võimalik reguleerida emissioonitugevust madala, keskmise ja kõrge taseme vahelRakendused- HVAC-süsteemide hooldus- Keemiatöötlemisettevõtted- Õlletehased
Fluke TL910 Elektroonika mõõtejuhtmete komplekt.Eriti peened 1mm otsad võimaldavad ligipääsu rasketesse kohtadesseOtsiku pikkus 100mm, juhtme pikkus 1m3 komplekti kullatud vedruga otsikut ja 2 komplekti roostevaba otsaCAT IV 600 V, CAT III 1000 V, 3 A
