Fiber + Power Solution for Outdoor PoE DevicesOvercome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
Range Extender|Data transmission speed 300 Mbps|IEEE 802.11b|IEEE 802.11g|IEEE 802.11n|WPA - Wi-Fi Protected Access|WPA2 - Wi-Fi Protected Access|Number of antennas 2|Wireless Frequency Range 2.4GHz|Wireless Transmit Power 20 dBm|Dimensions 101 x 75
Wireless Router, 3-pack, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz, Included Accessories 3 Power Adapters;1 RJ45 Ethernet Cable, Dimensions 190.5 x 90.7 x 90.7 mm
8-Port 10/100/1,000 Mbps Desktop Switch Eight 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz
4G LTE CAT12 Download up to 600 Mbps. Upload up to 150 Mbps WIFI & BT Wave-2 802.11ac Dual Band WIFI and Bluetooth LE DUAL SIM With auto failover, backup WAN and other switching scenarios LOAD BALANCING Allows to use multiple WAN sources to increase throughput GNSS Global Navigation Satellite System for location services with geofencing functionality RMS Compatible with Teltonika Remote Management System // RUTX14 is the fastest single modem LTE router in our portfolio. // 5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, USB interfaces, dual SIM for advanced throughput and ultra-reliable connectivity. // Equipped with advanced security features like multiple VPN's, firewall & cyber attack prevention. // Combination of fast LTE CAT12 connectivity, wide range of physical interfaces, extensive RutOS functionality and great remote management capabilities make this device an excellent choice for primary or backup connectivity
Mercusys AC1300 Whole Home Mesh Wi-Fi System Halo H30G (3-Pack) 802.11ac, 400+867 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support Yes, MU-MiMO Yes, White
DIN LATT Sisseehitatud, integreeritud DIN-kinnitus KOMPAKTNE 102 x 25 x 81,5 mm GIGABIT ETHERNET 4 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s 7-57 V Lai valik toetatud toitepingeid KESTVUS Vastupidav alumiiniumist korpus -40 °C KUNI 75 °C Lai töötemperatuurivahemik TSW304 on Teltonika Networks'i esimene haldamata lüliti, millel on integreeritud, sisseehitatud DIN-redeli kinnitus. Varustatud nelja Gigabit Ethernet porti, mis toetavad IEEE 802.3, IEEE 802.3u ja 802.3az Ethernet standardeid. TSW304 on projekteeritud lihtsat paigaldust silmas pidades ning sellel on kompaktsed mõõtmed ja löögikindel korpus koos integreeritud DIN-kinnitusega. 10/100/1000 Mbit/s Ethernet-portid ökonoomsete, suure ribalaiusega lahenduste jaoks, mis tagavad usaldusväärse andmeside läbilaskevõime. 2-poolne tööstuslik toitepesa ja lai toetatud toitepinge vahemik (7-57 VDC ja 9-40 VAC).
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
The Ubiquiti repeater and transceiver module enhances and extends your network's reach. With its Ethernet 1000Base-BiDi connectivity, it provides a reliable, wired connection that supports high-speed data transfer rates of up to 1.25 Gbps. This plug-in module can extend the network coverage up to 3 km, making it suitable for larger spaces needing robust connectivity.Engineered for durability and safety, the module meets IEC/EN 60825-1:2014 Class 1 standards, ensuring it operates safely within a broad temperature range from 0°C to 70°C. Its LC single-mode connectors allow for seamless integration with existing network infrastructure, making it a versatile addition to any setup. Whether you're looking to enhance your network's performance or extend its reach, the Ubiquiti repeater and transceiver module provides a reliable solution.
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
The TP-Link Omada SG2428LP V1 is a high-performance, smart managed switch designed to meet the demands of modern businesses. With a robust security framework, it ensures the safety of network data through encryption and access control measures. Its high-capacity networking capabilities, featuring a 56 Gbps switching capacity and support for up to 4000 VLAN groups, make it an ideal solution for complex network setups. The switch also offers efficient power and data connectivity with 16 PoE+ ports, simplifying the network infrastructure by combining power and data lines into a single cable. Additionally, the device's comprehensive network management features allow for easy setup, monitoring, and maintenance of the network, while its advanced networking features optimize traffic and enhance security. With its fanless design and durable metal housing, the TP-Link Omada SG2428LP V1 operates silently and reliably, making it a versatile choice for any business environment.
The TP-Link Omada EAP783 V1 is a wireless access point designed to meet the demands of modern businesses and tech-savvy homes. With support for Wi-Fi 6 technology, it delivers speeds up to 11520 Mbps, ensuring that your streaming, gaming, and downloading experiences are smooth. This device can support up to 640 connected devices and 24 SSIDs, making it suitable for high-density environments.Security is paramount, and the EAP783 V1 excels in this area with features like WPA3 encryption, MAC address authentication, and Access Control List (ACL) support, providing a secure network environment for all users. Additionally, its Omada Mesh technology, seamless roaming capabilities, and MU-MIMO technology ensure that your network is not only extensive but also consistently reliable across all connected devices.For businesses and network administrators, the cloud-managed and Zero-touch provisioning (ZTP) features of the EAP783 V1 make network setup and management simple and efficient, freeing up valuable time and resources. Whether you're upgrading your office network or setting up a high-performance home network, the TP-Link Omada EAP783 V1 is equipped to provide a superior wireless experience.
Ubiquiti UXG-Max on täiustatud ruuter, mis on loodud pakkuma suure jõudlusega võrguühendust nõudlikes keskkondades. Selle kompaktne vorm, võimas töötlemisvõime ja mitmekesised võrguvõimalused muudavad selle ideaalseks kaasaegsetele ettevõtetele. Seade pakub tugevat turvalisust, kiiret ühenduvust ja suure läbilaskevõimega jõudlust, tagades sujuva ja turvalise töö igas suuruses ettevõtetele.Peamised spetsifikatsioonid:Mehaaniline:Mõõtmed: 141.8 x 127.6 x 30 mm (5.6 x 5 x 1.2 tolli)Kaal: 520 g (1.1 lb)Korpuse materjal: PolükarbonaatVastupidavus: IK04Riistvara:Protsessor: Neljatuumaline ARM Cortex-A53 1.5 GHzMälu: 2 GB DDR4Haldusliides: Ethernet, BluetoothLAN-pordid: (4) 2.5 GbE RJ45WAN-pordid: (1) 2.5 GbE RJ45IDS/IPS läbilaskevõime: 1.5 Gbps (iPerf3 mõõtmisega DHCP WAN-il; jõudlus võib varieeruda PPPoE korral sõltuvalt ISP rakendusest)Toide ja LED-id:Toiteviis: USB tüüp-C (5V/3A)Maksimaalne energiatarve: 9.6WLED-id: Ethernet (Valge - link/aktiivsus)Tehase lähtestamise nuppKeskkonnatingimused:Töökeskkonna temperatuur: -10 kuni 40°C (14 kuni 104°F)Töökeskkonna niiskus: 5% kuni 95%, mitte kondenseeruvSertifikaadid: CE, FCC, ICLüüsi omadused:Jõudlus: Toetab WiFi QoS-i koos UniFi AP-dega, rakenduse, domeeni ja riigipõhist QoS-i ning internetikvaliteedi aruandlust.Järgmise põlvkonna turvalisus: Sisaldab rakendusteadlikku tulemüüri, IPS/IDS-ohtude tuvastamist, sisufiltreerimist ja olekutundlikku tulemüüri.Täiustatud võrk: License-free SD-WAN, WireGuard, L2TP ja OpenVPN serveri ja kliendi tugi, Teleport VPN, kohandatav DHCP ja IPv6 ISP tugi.
Discover the reliability and performance of the Ubiquiti UniFi network cable, a vital component for any modern network setup. This CAT 6 patch cable features male RJ-45 connectors on both ends, ensuring a secure and efficient connection between your devices. With compliance to TIA/EIA-568-B.2 standards, it delivers dependable network performance. Additionally, its VW-1 (UL1581) certification attests to its safety and durability, making it an ideal choice for indoor environments. Whether for home or office use, this network cable is designed to meet the demands of your networking needs, providing a stable and high-speed data transmission solution.
Wi-Fi 7 has arrived with jaw-dropping performance - offering accelerated throughput, lower latency, stronger anti-jamming, and higher efficiency. Join the pros and experience the sheer performance of the next-generation of Wi-Fi.
The Ubiquiti repeater and transceiver is designed to meet the demands of modern networking. This device offers a data transfer rate of 10 Gbps and supports 10 Gigabit Ethernet, making it suitable for environments requiring high-speed data transmission. With LC multi-mode connectors, it ensures a secure and efficient connection, while its ability to extend up to 300 m makes it versatile for various networking setups. Its plug-in module form factor allows for straightforward installation, integrating seamlessly into existing network infrastructures. Whether for business or advanced home networks, this Ubiquiti product is engineered to provide reliable, high-performance connectivity.
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
Zyxel GS-108B v5 ? 8-Port Gigabit Switch 8-port Gigabit switch with plug & play deployment QoS ports ensure stable traffic prioritization Fanless design for silent operation Durable metal housing with wall-mount option Energy-saving operation with IEEE 802.3az support Fast and easy networking for small businesses The Zyxel GS-108B v5 is an 8-port unmanaged Gigabit switch that seamlessly connects workstations, IP phones, storage, and other network devices. With plug & play functionality, it requires no configuration?just connect your devices and enjoy instant networking. QoS ports for prioritized and smooth data flow Four QoS ports (ports 5?8) on the GS-108B v5 are designed to handle critical traffic. Ports 5 and 6 offer medium priority, while ports 7 and 8 provide high-priority performance for demanding applications such as voice over IP. Silent and reliable build The passively cooled, fanless design ensures completely silent operation, making it perfect for noise-sensitive environments. Its sturdy metal housing improves heat dissipation and durability. The switch supports both desktop and wall-mounted installation. Smart energy efficiency built in Supporting IEEE 802.3az Energy Efficient Ethernet, the GS-108B v5 adjusts power consumption based on traffic levels. This enables significant energy savings without compromising network performance. 8 x 10/100/1000 Mbps RJ-45 ports QoS ports: 2 x medium (ports 5?6), 2 x high (ports 7?8) Switching capacity: 16 Gbps Forwarding rate: 11.5 Mpps MAC address table: 4K Packet buffer: 192 KB Jumbo frame support: up to 9 KB Fanless, passively cooled design Power consumption: max. 4.82 W Metal housing, desktop or wall-mountable Compliant with IEEE 802.3az Energy Efficient Ethernet Dimensions: 126 x 51.8 x 24 mm Weight: 0.176 kg
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
TSW210 INDUSTRIAL ETHERNET SWITCH The TSW210 is an Ethernet switch offering a perfect combination of Gigabit Ethernet and SFP. Eight Ethernet ports allow you to quickly and easily connect multiple devices to the network, without the need for further configuration. SFP enables remote devices to be enabled while maintaining high speed and reliability.
EC25-EU&KNe | LAN \ WAN ports 1 | PoE ports 1 | Memory (RAM) 256MB | Flash memory capacity 512MB | Included Accessories K-91 Fastening set5 V 0.8 A power adapter | Operating temperature range -40°C to 70°C
