Täiustatud WiFi 6 juurdepääsupunkt kõrge jõudluse ja paindliku paigaldusvõimalusegaSee WiFi 6 juurdepääsupunkt on loodud pakkuma suurepärast traadita ühendust, toetades täiustatud MU-MIMO tehnoloogiat ja mitme kasutaja samaaegset ühendamist. Ideaalne nii ärikeskkondadesse kui ka suure kasutajatihedusega kohtadesse, tagades sujuva ühenduse tänu PoE toitevarustusele ja mitmekülgsetele paigaldusvõimalustele.Mehaanilised spetsifikatsioonid:Mõõdud: Ø197 x 35 mm (Ø7.8 x 1.4") – stiilne ja madala profiiliga disain.Kaal:Ilma kinnitusteta: 580 g (1.3 lb)Kinnitusega: 720 g (1.6 lb)Korpuse materjal: Vastupidav polükarbonaat tagab pikaealisuse.Kinnituse materjal: Roostevaba teras (SUS304) kindla toe jaoks.Ilmastikukindlus: IP54 reiting, sobib varjulisse väliskeskkonda.Riistvara ja ühenduvus:Võrgu liides: (1) Gigabit Ethernet RJ45 port kiirete ühenduste jaoks.Juhtimisliides: Ethernet ja Bluetooth lihtsaks seadistamiseks ja haldamiseks.Toiteviis: PoE (Power over Ethernet).Toiteallikas: Ühilduv UniFi PoE lülitiga või PoE adapteriga (ei kuulu komplekti).Toetatud pingevahemik: 44—57V DC.Maksimaalne energiatarve: 13W.WiFi jõudlus:Maksimaalne edastusvõimsus:2.4 GHz: 22 dBm5 GHz: 26 dBm6 GHz: Ei ole toetatudMIMO:2.4 GHz: 2 x 2 UL MU-MIMO5 GHz: 4 x 4 DL/UL MU-MIMO6 GHz: Ei ole toetatudMaksimaalne andmeedastuskiirus:2.4 GHz: Kuni 573.5 Mbps (BW40)5 GHz: Kuni 4.8 Gbps (BW160)6 GHz: Ei ole toetatudAntenn ja LED indikaatorid:Antennivõimendus:2.4 GHz: 4 dBi5 GHz: 6 dBi6 GHz: Ei ole toetatudLED indikaatorid: Valged/sinised LED-id staatuse näitamiseks.Paigaldus ja töötingimused:Paigaldusvõimalused: Seinakinnituse ja laekinnituse tarvikud on kaasas.Töötemperatuur: -30 kuni 60° C (-22 kuni 140° F).Tööniiskus: 5 kuni 95% mitte-kondenseeriv.Sertifikaadid: CE, FCC, IC sertifitseeritud.Tarkvara ja WiFi standardid:WiFi standardid: 802.11a/b/g/n/ac/ax (WiFi 6), et tagada uusimad traadita tehnoloogiad.Traadita turvalisus: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) turvalisteks ühendusteks.BSSID: Toetab kuni 8 BSSID-d raadio kohta.VLAN tugi: 802.1Q täiustatud võrgu haldamiseks.Täiustatud QoS: Kasutajapõhine kiiruse piiramine liikluse optimeerimiseks.Külalisvõrgu isoleerimine: Toetatud parema võrgu turvalisuse jaoks.Samaaegsed kliendid: Toetab 350+ klienti samaaegselt.Null viivisega DFS: Jah* (toetatud tulevaste püsivara versioonidega).Toetatud andmeedastuskiirused:802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b: 1, 2, 5.5, 11 Mbps802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11n: 6.5 Mbps kuni 600 Mbps (MCS0 - MCS31, HT 20/40)802.11ac: 6.5 Mbps kuni 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)802.11ax (WiFi 6): 7.3 Mbps kuni 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
The TP-Link Omada SG2428LP V1 is a high-performance, smart managed switch designed to meet the demands of modern businesses. With a robust security framework, it ensures the safety of network data through encryption and access control measures. Its high-capacity networking capabilities, featuring a 56 Gbps switching capacity and support for up to 4000 VLAN groups, make it an ideal solution for complex network setups. The switch also offers efficient power and data connectivity with 16 PoE+ ports, simplifying the network infrastructure by combining power and data lines into a single cable. Additionally, the device's comprehensive network management features allow for easy setup, monitoring, and maintenance of the network, while its advanced networking features optimize traffic and enhance security. With its fanless design and durable metal housing, the TP-Link Omada SG2428LP V1 operates silently and reliably, making it a versatile choice for any business environment.
MS110P 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ - 10 Ports: 10× 10/100 Mbps RJ45 ports with 8 PoE+ ports - Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - 2× Uplink Ports: MS110P provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort - PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
U7-Outdoor on suure jõudlusega WiFi 6 ja WiFi 7 välipääsupunkt, mis on loodud karmidesse välistingimustesse. Seade on varustatud UV-kaitstud polükarbonaadist ja alumiiniumisulamist korpusega, pakkudes IPX6 ilmastikukindlust ja suurepärast tuulekindlust kuni 200 km/h (125 mph). Paigaldusvõimalused on paindlikud, sealhulgas seintele, lagedele ja postidele, mis teeb selle ideaalseks erinevatesse välistingimustesse.U7-Outdoor toetab kahesageduslikku MIMO-d (2x2) 2.4 GHz ja 5 GHz sagedusaladel, pakkudes maksimaalset andmeedastuskiirust kuni 688 Mbps 2.4 GHz ja 4.3 Gbps 5 GHz sagedusel. Seade on varustatud suunatud sisemise antenni ja väliste omniantennidega, tagades laia leviala kuni 12.5 dBi võimendusega 5 GHz sagedusalal. Toetades üle 200 samaaegset kasutajat, sobib see ideaalselt suure tihedusega keskkondadesse.Seade saab toidet PoE+ kaudu ja maksimaalne energiatarve on 19W. U7-Outdoor ühildub UniFi Network tarkvaraga ja toetab täiustatud turvafunktsioone, sealhulgas WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3), VLAN 802.1Q ja külaliste liikluse isoleerimist. Selle vastupidav disain ja arenenud funktsioonid teevad U7-Outdoorist ideaalse lahenduse kiire ja usaldusväärse internetiühenduse pakkumiseks karmides välitingimustes.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
The Zyxel NWA210BE is designed to meet the demands of high-performance wireless networking, offering robust connectivity and efficient management options. This external wireless access point supports a range of wireless protocols, including IEEE 802.11ax (Wi-Fi 6) and Wi-Fi 7, ensuring compatibility with a wide variety of devices. With dual radio capabilities, it can deliver maximum data rates of 688 Mbps on 2.4 GHz, 864 Mbps on 5 GHz, and 11530 Mbps on 6 GHz, catering to bandwidth-intensive applications and multiple users simultaneously.Featuring load balancing, MU-MIMO technology, and band steering, the NWA210BE enhances overall network efficiency and user experience. It also provides various security options, including WPA3 encryption and MAC address filtering, to keep the network secure. The device is cloud-managed, offering seamless remote management through SNMP, CLI, or WEB interfaces, making it a flexible solution for both enterprise and home environments.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
The TL-SF1016DS Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016DS can save up to 25%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 16 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Dell Adapter - USB 3 to Ethernet Type Adapter Interface SuperSpeed USB 3.0 to Gigabit Ethernet x 1 Color Black Dimensions 2.03 cm x 15.2 cm x 1.52 cm (WxDxH) Communication interface Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T Protocols 10Mb LAN, 100Mb LAN, GigE Warranty Terms 1 year warranty
The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
UniFi Building-to-Building Bridge model UBB is a 60 GHz/5 GHz wireless bridge with 1+ Gbps of throughput. It's the ideal solution for short-range high-throughput connectivity. Integration with the UniFi Controller makes bridging two networks seamless. As a pack of two radios it contains everything you need to get up and running within minutes. Enjoy simplea easy-to-use gigabit connectivity anywhere.Package Contents: - UniFi Building Bridge (x2) - Ball joint mount (x2) -Lock ring (x2) - Metal strap (x2) - Gigabit PoE (48V 0.32A) with mounting bracket (x2) - Power cord (x2)
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
