This USB-C to DP adapter provides a smooth and effortless experience for connecting your USB-C-enabled Mac, iPad or laptop to DP-enabled monitor or TV.
USB 5Gbps Type-C® to RJ45 Ethernet Adapter • USB 5Gbps Type-A NETWORK ADAPTER: USB 5Gbps Type-A to RJ45 Ethernet M/F Converter allows you to add 5GbE network access to a laptop, tablet using an available USB Type-A port • BROAD COMPATIBILITY: Auto-installs most operating systems including Windows10 and up, macOS 15.0 • 5Gbps BANDWIDTH: 4-speed auto-negotiation for optimal performance with network devices; Extend system longevity by retrofitting older systems • APPLICATIONS: Slim form factor adapter for office/hotel desks; Quickly download large files from a network, experience higher quality video conferencing & sync files to the cloud in the background with a faster/more secure connection compared to wireless • TECH SPECS: USB 5Gbps Type-A Adapter; 1x RJ45; 12 cm / 4.72 in attached Cable; 5Gbps Multi-Gigabit; 10/100/1000/2500/5000Mbps; WoL; VLAN; MDIX; Jumbo Frames; USB Pass through; USB Bus Powered
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS boot and use RouterOS. You can select the desired operating system from RouterOS from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Access Control List• MikroTik neighbor discovery• SNMP v1• Web-based GUI Switching results CRS326-24G-2S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput65 476.233 523.810 338.342 345.93 576.143 427.8SwitchingNon blocking Layer 2 capacity65 476.267 047.610 338.384 691.73 576.186 855.7SwitchingNon blocking Layer 1 throughput65 476.244 000.010 338.344 000.03 576.144 000.0SwitchingNon blocking Layer 1 capacity65 476.288 000.010 338.388 000.03 576.188 000.0 Ethernet test results CRS326-24G-2S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
Extender switch PoE DIN-FE4-AT-30W LanbergPoE extender (often referred to as a PoE repeater or "amplifier") is a practical component in installations where we need to run devices far from the telecommunications cabinet, and the classic 100 m limitation on Ethernet and PoE power becomes a barrier. Such a PoE switch acts as an active splitter: it regenerates the signal and transmits PoE power further, allowing you to safely "extend" power and transmission to subsequent points in the LAN without an additional power supply in the field and without having to deal with intermediate power sockets.Key features of DIN-FE4-AT-30W that really help installers and LAN administrators 4-port RJ45 layout: 1x input port + 3 PoE output ports (ideal when you need to add a "branch" to the installation). PWR and Link/Act LED indicators on ports quick diagnostics and field service. Extension of LAN and PoE power by another 100 m on a single UTP twisted pair (i.e., still "one cable"). DIN mounting on a TS-35 rail with a metal clip convenient, secure, and "rack-mounted." Extend the range of PoE power and network signal in your LAN by 100 mThis is the most common scenario: surveillance cameras, access controllers, alarm components, Wi-Fi/access points, and other PoE-powered network devices are "too far" from the main network switch in the rack. Instead of installing a 230 V power supply along the way, you insert a PoE extender into the path.The DIN-FE4-AT-30W works in a simple, practical way: it receives data and PoE power at the PoE input, and then provides a fresh Ethernet signal and PoE at the outputs - meaning you can effectively extend the range of your installation by another 100 m. This is a great solution when you need to run several PoE receivers, e.g., several cameras in a hall, parking lot, or long corridor, and the power supply and transmission are to go through a single UTP cable.4-port PoE extender switch with cascading capabilityIn practice, you gain the most when the extender works not only as a single module, but also in a serial arrangement. Both models can operate as an extender in a single configuration and in a cascaded connection.How does this work in the field? You connect the first extender (PoE IN) to the PoE switch, and then you can add another and another - up to 3 devices in series (i.e., a 3-level/three-level cascade). Each extender "adds" another 100 m, so you gain a maximum of +300 m in relation to the nominal range. At each stage, apart from the next extender, there is room for an additional network branch: you can connect 2 cameras or other peripherals (e.g., an IP sensor, a small AP) - that is, exactly when you have points "along the way" that you want to power with PoE. This is convenient when you are expanding your LAN in stages and want your infrastructure to be flexible and easy to maintain.Advanced PoE extender ready for any taskThe DIN-FE4-AT-30W is a compact Layer 2 switch that makes life easier in PoE installations thanks to proven transmission mechanisms: Automatic MDI/MDI-X - the ports select the pairing method themselves, so you don't have to worry about the type of cable (patch cord/crossover). Flow control (IEEE 802.3x) - flow control reduces losses and overloads during peak traffic. MAC auto-learning + 2K MAC table - automatic address learning speeds up operation and stabilizes switching in small LAN segments. The DIN-FE4-AT-30W version supports IEEE 802.3i (10Base-T) and IEEE 802.3u (100Base-TX) wired standards and PoE+ compliant with 802.3af and 802.3at. This is an important distinction, because in installations you will also encounter passive PoE solutions here we are talking about standard, negotiated PoE. At the same time, the device has passive cooling (no fan) and very low power consumption approx. 1.6 W, so it is suitable for continuous operation.Robust, durable housing and convenient mounting on a TS-35 DIN rail with a metal clipIn industrial and technical installations, it is not only the PoE function that counts, but also the installation. That is why the housing and metal clip for the TS-35 DIN rail are more than just a detail: they save time and keep the switchboard tidy.Advantages of DIN rail mounting for the installer/administrator: Quick and easy installation (snap-on) Space saving Easy modification and maintenance Versatility and standardization Neat cabling Durability and safety Cost reduction If your LAN infrastructure has areas where the network needs to be extended beyond the standard 100 m, and you also have PoE-powered devices (e.g., IP cameras and other devices, access points, etc.), the DIN-FE4-AT-30W is designed as an extender for such tasks. Choose the model according to your power requirements: PoE+ for typical peripherals or PoE++ where you need a larger PoE budget and gigabit transmission.
Sujuv 10GbE ühenduvus Ubiquiti 10G Ethernet-adapter (UACC‑Adapter‑RJ45‑USBC‑10GE) pakub ülikiiret võrguühendust kompaktse plug-and-play lahenduse kaudu. 10 GbE RJ45-porti ja USB‑C-liidest kasutades võimaldab see sujuvat integreerimist kaasaegsete sülearvutite, lauaarvutite ja serveritega. Polükarbonaadist ja alumiiniumisulamist korpus tagab vastupidavuse, hoides samal ajal disaini kerge ja kaasaskantavana. Ühilduv Mac OS 14.2 ja uuemate versioonidega, Windows 7/8/8.1/10/11 (32/64-bit) ja Linuxiga, pakub see universaalset ühenduvust laiale valikule seadmetele. Adapter toetab Gigabit LAN-i maksimaalse paindlikkuse tagamiseks ja sisaldab LAN-i aktiivsuse indikaatorit reaalajas võrgu staatuse näitamiseks. Töötab ümbritseva õhu temperatuuril 5 °C kuni 45 °C, mis teeb selle ideaalseks professionaalsetes keskkondades. NDAA-vastavus ja sertifikaadid (CE, FCC, IC, UKCA) tagavad, et see vastab rangetele ülemaailmsetele jõudluse ja ohutuse standarditele. Usaldusväärne jõudlus UACC‑Adapter‑RJ45‑USBC‑10GE on ideaalne lahendus kasutajatele, kes vajavad kiiret, traadiga Etherneti-ühendust USB‑C-portidega seadmetel. Täieliku 10 Gbps andmeedastuskiiruse toega on see mõeldud suure ribalaiusega rakenduste jaoks, alates suurte failide edastamisest kuni videokonverentside ja pilve juurdepääsuni. Tänu kergele konstruktsioonile on seda lihtne kaasas kanda, samas tagavad tugevad materjalid usaldusväärse töö nõudlikes keskkondades. Paigaldamine on lihtne – ühendage lihtsalt ja uuendage oma seadme võrguvõimalusi ilma täiendavate draiveriteta. Adapteri sisseehitatud LAN-aktiivsuse indikaator hoiab teid kursis ühenduse seisundiga, parandades kasutatavust. Kas te seadistate seda kontoris, andmekeskuses või koduses töökohas, see adapter pakub kiirust ja stabiilsust, mida tänapäeva võrgustikud nõuavad.
360° katvus Swiss Army Knife Omni antenn pakub täielikku 360-kraadist omnidirektsionaalset katvust ja on loodud töötama sujuvalt koos Ubiquiti Ultra-seeria juurdepääsupunktidega. Antenni võimendus on 4 dBi 5 GHz sagedusalas ja 3 dBi 2,4 GHz sagedusalas, mis parandab traadita signaali tugevust ja ulatust kahe sagedusalaga võrkudes. Antenni mõõtmed on 154 × 15 × 15 mm ja kaalub vaid 42 g paari kohta, mis muudab selle diskreetseks ja lihtsaks integreerida. Valmistatud vastupidavast termoplastilisest polüestrist elastomeerist, polükarbonaadist, polübutüleentereftalaadist ja polüoksimetüleenist, on sellel IPX6-klassiga ilmastikukindel korpus, mis sobib välistingimustes kasutamiseks. Sõltumata sellest, kas soovite laiendada leviala rõdul, katusel või siseruumide avatud alal, pakub see lisaseade usaldusväärset kiirguse mustrit ja kindlat jõudlust suure tihedusega Wi-Fi-võrkude jaoks. See antenn on spetsiaalselt loodud Swiss Army Knife Ultra seadme lisaseadmena, mis võimaldab hõlpsasti kohandada seadistust ilma olemasolevaid seadmeid asendamata. Kahe sagedusriba disain Swiss Army Knife Omni antenn on spetsiaalselt loodud töötama nii 2,4 GHz kui ka 5 GHz sagedusribadel, pakkudes ühtlast katvust ja tugevat jõudlust keskkondades, kus on segatud traadita seadmed. Selle kahe sagedusriba võime tagab usaldusväärse ühenduse nii vanematele 2,4 GHz seadmetele kui ka kaasaegsetele kiiretele 5 GHz klientidele, säilitades tasakaalustatud võrgu läbilaskevõime ja ulatuse. See on loodud Ubiquiti Swiss Army Knife Ultra Access Pointi lisaseadmena, ühendub otse ja integreerub sujuvalt UniFi ökosüsteemi. Antenni kerge konstruktsioon ja õhuke kuju muudavad selle ideaalseks paigaldamiseks piiratud ruumi või esteetilise välimuse nõudvatesse kohtadesse, nagu kontorid, kohvikud, laod või väljasõidukohad. Valmistatud ilmastikukindlatest materjalidest ja IPX6-klassiga, talub see vihma, tolmu ja temperatuurimuutusi, tagades vastupidava välistingimustes töötamise. Selle omnidirektsionaalne kiirguse muster tagab ühtlase signaali jaotuse, kindlustades stabiilse ühenduse mitmele kasutajale. Olgu tegemist välistingimustes katvuse laiendamise või siseruumide töökindluse parandamisega, Swiss Army Knife Omni Antenna tagab tasakaalustatud ja pikaajalise võrgu jõudluse.
RUTX50 router RUTX50 is a modern, multi-network industrial router offering 5G mobile communication for high-speed applications with large amounts of data. 5G dual SIM cellular communication combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enables reliable data transfer with ultra-low latency. The power of 5G technology, combined with a wide range of interfaces and industrial hardware features, provides the ability to adapt to future upgrades and expansions. RUTX50 ships with RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is also Remote Management System (RMS) compatible, for optimized remote management and monitoring capabilities of large fleets of devices.
Layer 2 Features Link Aggregation Control Protocol (LACP) 4K VLAN GVRP (GARP VLAN Registration Protocol) Port Isolation STP/RSTP/MSTP IGMP Snooping Quality of Service 4 priority queues Support IEEE 802.1P DSCP QoS Rate limit feature Security Strategies IP-MAC-Port-VID Binding Access Control List (L2~L4 ACL) 802.1x and RADIUS Authentication Support DoS defend Port Security SSL and SSH encryptions Management Web-based GUI Command Line Interface SNMP v1/v2c/v3 RMON (1,2,3,9 group)
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
Netgear 5 x 10/100/1000 Platinum Ethernet Switch, Lifetime Hardware Warranty Type Ethernet Switch Modem speed 10/100/1000 Mbps Gigibit Ethernet I/O ports 5 Ports Connector type Plastic LED Power, Link/Activity Form Factor Desktop or wall-mountable Noise 0 dBA (Fanless) Power 5V / 0.7A DC Power Adapter Power consumption 2.34 W Max. Features Energy Efficient Ethernet Support (IEEE 802.3az); 9,216 bytes Jumbo Frame Support; 2K MAC table; 1 Mbit Packet buffer; MTBF (@ 25° C): 1,386,257 hours; Electromagnetic compliance: Class B Dimensions 118 x 73 x 30 mm Weight 0.10 kg
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
Original part number PP6U-3M/R Product name Gembird UTP Cat6 Patch cord, 3 m, red Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 3 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Red
Complete Custom Hardware for the WISP, right down to the Silicon Our core communications processing engine surpasses all of the limitations inherent to generic Wi‐Fi chips. Game-Changing LTU Technology Spectral Efficiency Comparison of 802.11n, 802.11ac, airFiber Original, and LTU by year. Industry Leading Complete Software Suite IP-67 Durability airFiber 5XHD is Water Resistant and Perfect for any Weather Conditions.
Price/Performance Breakthrough The EdgeRouter™ 6P offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 6p can be rack-mounted with the use of the EdgeRouter Rack Mount Kit, model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 6P is supported and managed by UNMS™ (Ubiquiti® Network Management System), a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e FTP (shielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , Conductor stranding pikkus: 305 m värv: hall
