Võrguseadmed

10x CAT 6 S-FTP Patchkabel, Cu, LSZH AWG 27/7, Länge 2 m, Farbe Rot

10x CAT 6 S-FTP Patchkabel, Cu, LSZH AWG 27/7, Länge 2 m, Farbe Grün

.CAT 6 S-FTP Patchkabel, Cu, LSZH, AWG 27/7, Länge 5 m, Farbe Grün

Equip 401491, S/FTP, 100 m

PLANET IP30 Industrial L2+/L4 8-Port 1000T 802.3at PoE+ 4-port 100/1000X SFP Full Managed Switch (-40 to 75 C, dual redundant power input on 48~56VDC terminal block, DIDO, ERPS Ring Supported, 1588) (IGS-5225-8P4S)

Equip 603009, RJ45, 20 m

Catalyst 9200 48-port data only, Network Essentials

Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: Punch down tool Lisaandmed: Lanberg insertion tool for LSA connection also know as punch tool for, Krone IDC 110 Ühendusi ja patch tool is used to crimping/terminating kaabel in, LSA tehnoloogia used to perform the kaabel terminations of flush mounted, ja surface mounted data box, ICT, patch panels ja many other devices dedicated, mainly to telecommunication installation. The device is ideally suited for, LSA sockets in xDSL ja ISDN võrguseade together koos the terminating of kaablid, on the LSA Ühendusi ja block of telephone panels Ühendusi., Due to the fact that a single wire can not be in insulation, the LSA technique, koos stripping of insulation eliminates this problem which translates, to the practical use of this tool. NT-0001 has in itself the spring which ensure, proper vein clamp to the wall socket, hook for pulling veins together with, element to dismantle the terminal block from socket, scissors equipped with, a lock ja the regulator force of impact - sügavus of pressing the veins in, ühenduspesa to cut the excess kaabel. Through Lanberg insertion tool, wiring, will be much lihtner, ja the crimping process significantly will punaneuce, the operating time compared to manual attempts või lihtner applications., In accordance koos EIA/TIA 568 B, Allows to connect a kaabel koos a diameter värv: valge

DIGITUS 10G SFP+ Module, Multimode, DDM LC Duplex Connector, 850nm, up to 300m

QNAP QSW-308S. Lüliti tüüp: Mittejuhitav. RJ-45 Etherneti ühenduse pesade tüüp: Gigabit Ethernet (10/100/1000), RJ-45 Etherneti ühenduse pesade arv: 8. MAC-aadresside tabel: 16000 sisestust, Lülitusvõime: 76 Gbit/s. ...

Features: Bendable booted RJ45 Ultra-thin OD 3mm Cable length from 0.1 m up to 8 m Pass TIA-568-B.2 Cat6 Channel test by Fluke

Zyxel switch GS2220-10HP-EU0101F network Managed L2 Gigabit Ethernet (10/100/1000) must Power over Ethernet (PoE)

Product kirjeldus: Lanberg patch kaabel - 50 cm - must, RAL 9004 Type: Patch kaabel - CAT 6a tehnoloogia: S/FTP Shielding Material: Aluminium foil koos braid Features: Halogen-free, molded, snagless, stranded, drain wire, test fluke pass, Copper-Clad Aluminium (CCA) conductors, HDPE conductor insulation, string bag package pikkus: 50 cm Diameter: 6 mm ühenduspesa: RJ-45 - male ühenduspesa (Second End): RJ-45 - male värv: must, RAL 9004

Cable length: 2

D-Link EAGLE PRO AI AX1500. Toote värv: Valge, Antenni tüüp: Sisemodem, Toote tüüp: Mesh system. Wi-Fi laineala: Kaks sagedusala (2,4 GHz / 5 GHz), Wi-Fi standard: Wi-Fi 6 (802.11ax), WiFi-standardid: 802.11a, 802.11b, 802.11g, ...

Broadcom NetXtreme P425G (BCM957504-P425G) 4x25GbE (25/10GbE), PCIe 4.0 x16, SFP28, BCM57504, Ethernet Adapter, LP + FH brackets incl, BOX

UDC-1 cables for uplinks between the UniFi switch and the SFP ports.1Gbps or 10Gbps capacitiesThe cable is copper and incorporates SFP modules.Designed for UniFi switches to chain between communication cabinets/boxes.SFP+ 10G passive copper cables can be used for short distance 10Gbps transmission. Transceiver cables are perfect solution for a server room applications.

Lüliti Trendnet TEG-S750

This DP 8K certified USB-C™ to DisplayPort cable by Delock enables the connection between different devices with USB Type-C™ and DisplayPort connectors. Versatile applications The bidirectional cable works in both signal directions and therefore offers a variety of possible applications. It can be used, for example, to connect a monitor or TV with DisplayPort socket to a laptop or smartphone with USB Type-C™ port. Alternatively it is possible to connect a USB Type-C™ monitor to a device with DisplayPort output. 8K Ultra HD resolution and HDR support By supporting a maximum bandwidth of 32.4 Gbps, content up to 8K Ultra HD (7680 x 4320 @ 60 Hz) resolution can be displayed. Due to the HDR support colours are realistically displayed with impressive depth, brightness and contrast are optimally reproduced.   Specification • Connectors:   1 x USB Type-C™ male >   1 x DisplayPort male • Chipset: Chrontel CH7213 • DisplayPort 1.4 specification • Downwards compatible to DisplayPort 1.3, 1.2 and 1.1 • DisplayPort® DP 8K certified cable • Cable gauge: 32 AWG • Cable diameter: ca. 4.8 mm • Copper conductor • Triple shielded cable • Contacts gold-plated • Transmission of audio and video signals • Data transfer rate up to 32.4 Gbps • Resolution up to:   Display with DSC support:   7680 x 4320 @ 60 Hz   5120 x 2880 @ 120 Hz   3840 x 2160 @ 240 Hz   Display without DSC support:   7680 x 4320 @ 30 Hz   5120 x 2880 @ 60 Hz   3840 x 2160 @ 120 Hz   (depending on the system and the connected hardware) • Supports Display Stream Compression 1.2 (DSC) • Supports HDR • Supports HDCP 1.4 and 2.2 • Supports HBR3 (8.1 Gbps) data rate • Up to 32 audio channels for speakers • Up to 1536 kHz audio sampling rate • Supports colour sampling in 4:4:4, 4:2:2 and 4:2:0 format • Plug & Play • Colour: black • Length incl. connectors: ca. 1.5 m   System requirements • Android 8.0 or above • Chrome OS 71.0 or above • iOS 12.1.4 or above • Mac OS 10.14.2 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port and DisplayPort alternate mode or • PC or laptop with a free Thunderbolt™ 3 port • A free DisplayPort interface   Package content • USB-C™ to DisplayPort cable

Simplify your technology transition with Intel Ethernet X710-T2L and X710-T4L network adapters. Auto-negotiation of port speeds provides maximum flexibility in dual- and quad-port 10GBASE-T configurations. These low-power power supplies also support Energy Efficient Ethernet technology to effectively reduce power consumption during periods of low data activity. The X710-T2L and X710-T4L are part of the Intel Ethernet 700 series, the foundation of server connectivity; enabling broad interoperability, critical performance optimizations and increased flexibility for network solutions across communications, cloud and enterprise IT. Interoperability across multiple speeds and media types ensures broad compatibility supported by extensive testing and validation. Intelligent offload optimization and accelerators to unlock network performance on Intel Xeon-based servers. Agility kernel drivers and Data Plane Development Kit (DPDK) for scalable packet processing. The Intel Ethernet 700 Series delivers network performance across a wide range of network port speeds with intelligent offload, advanced packet processing, and high-quality open source drivers.

Deltaco DEL-110, 3 m

Patchcord, 10G, PIMF PrimeLine, CQ3093S

Patchcord, 10G PIMF PrimeLine, CQ3057S

- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support

- Duplex cable- LSOH- Connector with ceramic ferrule- Cable diameter 3mm- Single packed with test-report- Connector 1: LC- Connector 2: LC- Cable type: I-VH 2E9/125µ- Fiber class: OS1- Mode: Singlemode- Color cable: yellow- Boot: single-color- Fiber diameter: 9/125µ- Length: 10m- Packaging: DIGITUS PolybagPistmik 1LCPistmik 2LCSuguSisestatav konnektor/sisestatav konnektorSüdamiku läbimõõt9 µmKaitsekihi läbimõõt125 µmToote värvKollaneTäisdupleksJahKaabli pikkus10 mKaabli läbimõõt3 mm

Intellinet Transceiver SFP+ 10G Singlemode Duplex LC 10km

Cisco C9300-48P-A