TP-LINK 500Mbps Mini Powerline Adapter TL-PA411 turns your existing powerline into a high speed network with no need for new wires or drilling. No configuration is required, simply plug your adapters into your power sockets and you can establish networking infrastructure in a flash. With a speed of up to 500Mbps, TL-PA411 transmits multiple HD streams and even 3D movies to every room, making it a great choice for an easy to build multimedia entertainment network. HomePlug AV standard compliant, high-speed data transfer rates of up to 500Mbps No new wires, Easy Plug and Play operation, No configuration required Super small design with a new exterior, blends indiscreetly in front of any power outlet Patented Power-Saving Mode automatically reduces power consumption by up to 85%*
Original part number CS1716I-AT-G Product name ALTUSEN KVM 16 port over the Net Producer Aten Class of product KVM switches Number of PC ports 16 Supported keyboard/mouse/display ports USB, USB, DSub-15PS/2, PS/2, D-Sub-15 Local console's ports 1 x (PS/2, PS/2, D-Sub-15) 1 x (USB, D-Sub-15) Number of remote users (IP) 1 Type of computer case 1U Rack Maximal resolution 2048 x 1536 pixels Active port selection pushbuttonkeyboard hotkeysthrough OSD Menu Possibility of joining into cascade Yes Switching audio signal (microphone/speakers) No Functions (additional) secure access on password protectionauto scanning allows easy monitoring of attached computerseasy firmware upgradesimple control through an on screen menuadvanced managing KVM by WEB browser Standard accessory communication cablepower supply cableAC adapterclip handle Width 43.3 cm Height 4.4 cm Depth 16 mm Net weight 3000 g Additional information Uses IP for controlling of connected computersSupports multimedia keyboards and mice USB and PS/2 SUN, PC MACAuto-Scan functionsSupportsRadius,LDAP,LDAPS serversBuilt-in Message Board functionSupports DET (Display Emulation Technology)Auto reconfiguration of ports after changing of connected PCs sequence
ZyXEL One Network experienceIntelligent and high-powered Power over Ethernet (PoE)High level network and access securityFuture-proof connectivity for evolving networks
Ethernet LAN (RJ-45) PoE ports quantity 4 Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Auto MDI/MDI-X Yes MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Ventilation fan(s) No Power over Ethernet (PoE), W 120 SFP+ slots quantity 1 Maximum data transfer rate, Gbit/s 7.44 Switch type Unmanaged Ports quantity 5 Storage temperature range (T-T), °C -40 - 70 °C Jumbo Frames support Yes Supported data transfer rates 10/100/1000 Mbps Weight, g 500 Dimensions W x D x H, mm 29.1 x 107.3 x 139 Operating temperature range (T-T), °C 0 - 50 °C Power consumption, W 44.5 Switch layer L2/3 Switching capacity, Gbit/s 128 MAC address table, entries 16000 Power over Ethernet (PoE) Support Yes
Extend a PoE connection beyond the 100m limitIEEE 802.3af and IEEE 802.3at complianceEase of installation with no additional power supplyCompatible with all Axis network video productsIndoor use
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Plug and Play Compatibility Use the Ubiquiti PAK-620 Precision Alignment Kit with any of these dish antennas: airFiber® AF-5G30-S45, PowerBeam™ PBE-5AC-620, PowerBeam PBE-M5-620, and RocketDish™ RD-5G30-LW. Optimal Link Deployment Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance.
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 5m
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
Built to Fight Noise With Prism Active RF Filter The Ubiquiti R&D team designed airPrism filtering as a robust solution for tower co-location interference. Requiring no communication between radios – and functioning despite noise from other vendors’ radios (unlike GPS synchronization) – airPrism enables greater system capacity and overall throughput by further reducing out-of-band energy. Using airMAX ac technology, the PrismStationTM delivers throughput speeds up to 500+ Mbps and signal ranges up to 5+ km (3+ miles). It also offers the following features:All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the PrismStation 5AC for your specific installation requirements:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mounting30°60°90°Management Wi-Fi Radio The PrismStationTM AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Enhanced Co-Location Asymmetrical horn antenna options (60° and 90°) have naturally attenuated side lobes and extremely low back radiation, and they offer industry-leading front-to-back ratio and low side lobe radiation. Symmetrical horn antennas (30° and 45°, the default) are ideal for cluster sector installations with high co-location requirements.Improved Noise Immunity PrismStationTM AC blocks or spatially filters out noise,so noise immunity is improved.This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Hight MAC Efficiency High MAC efficiency provides ±80% PHY RATE throughput. Modular Design The antenna horn is interchangeable and helps with beam-shaping for specific deployment and environment needs. The PrismStationTM AC also gets maximum gain out of the smallest footprint. Beam Performance Perfected The PrismStationTM can use a variety of horn antenna sectors designed for increased co-location performance without sacrificing gain. Its unique beam performance and superb co-location characteristics allow for a higher density of sectors than traditional sector technology. Now with airOS®8 Sporting an all-new design for improved usability, airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX® ac products
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Shielded- Boots with kink protections and strain reliefs- Spot length on boot- Material: CuKaabli pikkus15 mKaablistandardCat6aPistmik 1RJ-45Pistmik 2RJ-45Kaabli kateS/FTP (S-STP)SuguMale/MaleKaabli värvHallKogus pakendi kohta1
Delocki adapter laiendab arvutit või sülearvutit ühe võrguliidese võrra USB Type-A liidese kaudu.SpetsifikatsioonÜhendused:1 x USB 5 Gbps Type-A isend1 x Gigabit LAN RJ45 pesaKiibistik: ASIX AX88179Andmeedastuskiirus:Ethernet kuni 10 Mbit/s (pool/täielik dupleks)Fast Ethernet kuni 100 Mbit/s (pool-/täielik dupleks)Gigabit Ethernet kuni 1000 Mbit/s (pool-/täielik dupleks)Ühildub järgmiste seadmetega:IEEE 802.3: 10BASE-TIEEE 802.3u: 100BASE-TXIEEE 802.3ab: 1000BASE-TToetab Auto MDI-X (standard- või crossover võrgukaabli automaatne tuvastamine)Toetab Wake On LAN (WOL)Toetab IEEE 802.3az (energiatõhus Ethernet)Toetab täisdupleksset tööd IEEE 802.3x voolujuhtimisega ja pooldupleksset tööd tagasilöögiga.Ühildub allapoole USB 2.0-gaLED-indikaator linki ja aktiivsuse kohtaUSB-vahendi toiteallikasKaabli pikkus ilma pistikuteta: ca 50 cmMõõtmed (LxSxK): ca. 68 x 30 x 18 mmSüsteeminõudedLinuxi tuum 3.13 või uuemMac OS 10.7 või uuemWindows 7/7-64/8.1/8.1-64/10/10-64PC või sülearvuti, millel on vaba USB A-tüüpi portPaketi sisuUSB 3.0 Gigabit LAN adapterJuhi CDKasutusjuhend
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 FTP (shielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm.GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred. The GPEN family of products includes switches with outdoor enclosures, which support powering from PoE sources, such as the GPEN11 injector. A basic setup inside customer premisis to provide the Internet connection. Power adapter is not included in the package.
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
Mootoriga D-kategooria paat koos haagisega. Uus hind! [0/879] 
