The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.Andmeedastuskiirus (maksimaalne)100 Mbit/sKonverteri sisendi liides100BASE-FX,100Base-TX,10Base-TKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3uEthernet-liidese tüüpFast EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sDupleks-süsteemTäisversioon, HalfFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus2000 mLainepikkus1310 nmKiustruktuurMulti-mode, Single-modeToetatud kiudkaabli läbimõõt9/125, 50/125, 62.5/125Tx-võimsus (minimaalne)-23,5 dBmWTx-võimsus (maksimaalne)-14 dBmWTundlikkus-31,8 dBmWSisemineEiToote värvMustSisendpinge5Sisendvool2Laius97 mmSügavus69 mmKõrgus26 mmKaal200 g
The new DIGITUS® Category 6 Class E, U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6 cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6, because of the new red colored connector.Kaabli pikkus0,5 mKaablistandardCat6Pistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMust, PunaneKaabli klassESuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7Kasutamistemperatuur (T-T)-20 - 60 °CKaabli värvMustPakendi tüüpPlastkott
Das Sharkoon Patchkabel RJ45 Cat.6 SFTP mit 25 cm Länge eignet sich zum Verbinden von Computern mit einem Hub bzw. Switch innerhalb eines Ethernet Netzwerkes (Gigabit-Ethernet geeignet), oder zum Anschluss eines DSL-Modems an den Computer. Das Kabel entspricht Cat.6 und verfügt über eine SFTP-Abschirmung (Screened Foiled Twisted Pair).
Das Sharkoon Patchkabel RJ45 Cat.6 SFTP mit 25 cm Länge eignet sich zum Verbinden von Computern mit einem Hub bzw. Switch innerhalb eines Ethernet Netzwerkes (Gigabit-Ethernet geeignet), oder zum Anschluss eines DSL-Modems an den Computer. Das Kabel entspricht Cat.6 und verfügt über eine SFTP-Abschirmung (Screened Foiled Twisted Pair).
Tutvustame EmiterNet välise geeliga täidetud FTP (F/UTP) Cat.5e kaablit, 4x2x0,5 PE+GEL - eksklusiivset võrgulahendust usaldusväärseks ja kiireks andmeedastuseks välitingimustes. See kaabel on hoolikalt konstrueeritud geeliga täidetud struktuuriga, mis tagab parema kaitse niiskuse ja keskkonnategurite eest, tagades optimaalse jõudluse ja vastupidavuse karmides tingimustes. Kaabel on 0,5 mm läbimõõduga juhtmetega neljapaariline (4x2) keerdpaariline konstruktsioon, mis säilitab signaali terviklikkuse ja minimeerib häired, mistõttu on see ideaalne Ethernet-rakenduste jaoks. FTP (Foiled Twisted Pair) konstruktsioon on tugevdatud täiendava varjestuskihiga, mis vähendab oluliselt elektromagnetilisi häireid, mistõttu sobib see kasutamiseks keskkondades, kus välised häired võivad olla probleemiks. Kaabli vastupidavast polüetüleenist (PE) välismantel on ilmastikukindel ja vastupidav, pakkudes erakordset vastupidavust ja paindlikkust mitmesuguste võrguseadmete puhul. EmiterNeti välise geeliga FTP Cat.5e kaabel lubab vaieldamatut jõudlust ja usaldusväärsust, tagades tõrgeteta ühenduvuse ja andmeedastuse paljudes rakendustes, olenemata sellest, kas olete ehitamas võrguinfrastruktuuri äri-, tööstus- või eluruumidesse.
U11 Pro AX900 Wi-Fi 6 Wireless USB Adapter. The U11 Pro supports the new generation of Wi-Fi 6 technology, with a dual band concurrent speed of 886Mbps. The highest speed in the 2.4GHz band can reach 286Mbps, and the highest speed in the 5GHz band can reach 600Mbps. Desktop computers can connect to Wi-Fi by using U11 Pro, while connected computers can transmit WiFi sharing to other devices by U11 Pro. Support driver free installation, no need to download drivers, eliminates tedious installation steps. Adapt to various operating systems including Windows 11, Windows 10, Windows 7, and Linux to meet the needs of various desktop and laptop computers.
• Must • Kontrollitavate arvutite arv: 4 • Klaviatuuri pordi tüüp: USB Hiire pordi tüüp: USB Videopordi tüüp: HDMI • 4K Ultra HD 3840 x 2160 pikslit • Korpuse materjal: Metall • Vahelduvvool 5 W ATEN CS1184H4C, 3840 x 2160 pikslit, 4K Ultra HD, 5 W, Must
High-Performance L2+ PoE+ Solution with Static RoutingThe IGS-4215-16P4X is PLANET's Industrial-grade, DIN-rail L2+ Managed Gigabit PoE+ Switch, upgraded with L2+ static routing to enhance inter-VLAN communication and network efficiency. It offers 16 10/100/1000BASE-T ports with 802.3at PoE+ (up to 36W per port) and 4 10GBASE-X SFP+ fiber slots for high-speed uplinks.With a total PoE power budget of 360 watts (achievable only with dual power inputs), it supports diverse PoE applications, including IP cameras and wireless access points. Operating in extreme temperatures from -40 to 75°C, the IGS-4215-16P4X features advanced PoE management, IPv6/IPv4 dual stack support, and a rugged IP30 aluminum enclosure. Its USB Type-C console port ensures simple management, making it a reliable choice for demanding industrial environments.Cybersecurity Network Solution to Minimize Security RisksThe IGS-4215-16P4X supports SSHv2 and TLSv1.3 protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, Dynamic ARP Inspection Protection, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.Modbus TCP Provides Flexible Network Connectivity for Factory AutomationThe IGS-4215-16P4X supports the Modbus TCP protocol, allowing for easy integration with SCADA systems, HMI systems, and other data acquisition systems in factory floors. This enables administrators to remotely monitor the industrial Ethernet switch's operating information, port information, communication status, and DI/DO status, thereby enhancing monitoring and maintenance of the entire factory.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe IGS-4215-16P4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.Reliable Power and High-speed Data with IEEE 802.3at PoE+ SupportThe IGS-4215-16P4X is designed to meet the needs of networks with smaller to medium PoE power demands, complying with the IEEE 802.3at PoE+ standard. It delivers a total power capacity of 360 watts across its 16 PoE+ ports, with each port supporting up to 36 watts of power. This makes it ideal for powering a range of medium-power PoE-compliant devices (PDs) over standard Cat5e/6 Ethernet cabling.The IGS-4215-16P4X is better suited for applications with multiple devices that require moderate power. It’s an excellent choice for:PoE IP camerasWireless access points (APs)IP phones and VoIP systemsDigital signage displaysIndustrial IoT devicesONVIF Support Allows Effective and Centralized Control Over IP-based Security ProductsThe IGS-4215-16P4X switch offers ONVIF support as part of its versatile feature set for seamless integration with IP surveillance cameras. Through the switch's web GUI, users can easily search for and display all ONVIF-compliant devices on their LAN.Users can also upload floor plans to the switch and place IP surveillance cameras on the plan for more intuitive planning and faster inspection in the future. Additionally, the web GUI provides real-time surveillance information, online/offline status, and the ability to remotely reboot cameras.Intelligent Powered Device Alive CheckThe IGS-4215-16P4X can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-16P4X will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing the administrator’s management burden.Scheduled Power RecyclingThe IGS-4215-16P4X allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingsUnder the global trend of energy savings and contributing to environmental protection, the IGS-4215-16P4X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you enable or disable PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.802.3at PoE+ Power and Ethernet Data Transmission Distance ExtensionIn the "Extend" operation mode, the IGS-4215-16P4X operates on a per-port basis with a 10Mbps duplex configuration. It can deliver 15-watt PoE power output over a distance of up to 250 meters, exceeding the standard 100-meter Ethernet UTP cable limit. This extended range allows PoE power to be supplied over longer distances without the need for additional cabling or electrical outlets, significantly reducing installation costs while maintaining network reliability.Effective Alarm Alert for Better ProtectionThe IGS-4215-16P4X incorporates a Fault Alarm feature that promptly notifies users of any issues with the switches. This valuable feature eliminates the need for users to spend time locating the problem, resulting in significant time and human resource savings.Digital Input and Digital Output for External AlarmThe IGS-4215-16P4X supports Digital Input and Digital Output through a terminal block located on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-4215-16P4X port shows “link down”, “link up” or “power failure”.Environmentally Hardened DesignWith the IP30 aluminum industrial case, the IGS-4215-16P4X provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 °C, the IGS-4215-16P4X can be placed in almost any difficult environment.Robust ProtectionThe IGS-4215-16P4X provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible ManagementThe IGS-4215-16P4X switch delivers high-performance transmission and advanced Layer 2 and Layer 4 functionalities, along with Layer 3 IPv4 and IPv6 static routing. This capability enables efficient routing between different VLANs and IP addresses, offering a secure, flexible, and straightforward networking solution for diverse applications.Robust Layer 2 FeaturesThe IGS-4215-16P4X can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. With dynamic port link aggregation, the switch enables the creation of a high-speed trunk. For instance, it can combine four 10G ports, creating a resilient 40Gbps connection with fail-over support. Additionally, the inclusion of Link Layer Discovery Protocol (LLDP) enhances Layer 2 functionality by providing essential information about neighboring devices within the local broadcast domain.Efficient Traffic ControlThe IGS-4215-16P4X is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.Enhancing Network SecurityPLANET IGS-4215-16P4X offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Ensuring Network IntegrityThe IGS-4215-16P4X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. Its accuracy, consistency, and reliability of data can be transmitted across a network. Moreover, it ensures that information remains unaltered during transmission and that the network itself is secure from unauthorized access or attacks.User-friendly and Secure ManagementFor efficient management, the IGS-4215-16P4X is equipped with Command line, Web and SNMP management interfaces.With the built-in Web-based management interface, the IGS-4215-16P4X offers an easy-to-use, platform-independent management and configuration facility.For text-based command line management, it can be accessed via Telnet, SSH and the console port.By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.Moreover, the IGS-4215-16P4X offers secure remote management by supporting SSHv2, TLSv1.3 and SNMPv3 connections which encrypt the packet content at each session.Flexible Long-distance Extension SolutionThe emergence of 10G Ethernet marks a significant advancement in Ethernet technology. The IGS-4215-16P4X is a powerful networking device that offers four 10G SFP+ slots capable of supporting three different speeds. These slots can operate at 10GBASE-SR/LR or 100M/1G/2.5GBASE-SX/LX backwards, providing administrators with flexibility in choosing the most suitable SFP/SFP+ transceiver based on the required transmission distance and speed. With ample bandwidth and robust processing capacity, the IGS-4215-16P4X provides an efficient solution for administrators seeking to enhance their network infrastructure.Intelligent SFP Diagnosis MechanismThe IGS-4215-16P4X supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Remote Management SolutionPLANET's Universal Network Management System (UNI-NMS) and CloudViewerPro app provide robust support for IT staff in effectively managing and monitoring all network devices, including the IGS-4215-16P4X, from remote locations. Tailored for deployment in both enterprises and industries where the IGS-4215-16P4X is utilized remotely, these systems enable the identification of bugs or faulty conditions without the need for on-site visits. With UNI-NMS or the CloudViewerPro app, businesses of all types can now be swiftly and efficiently managed through a unified platform, streamlining operational oversight.
Cost-optimized, Configure-free Gigabit PoE+ Switch for System IntegratorsPLANET GSW-5240HP, an ideal high-density Gigabit PoE Switch, provides cost-effective and Plug and Play advantages for the local area networks of SMBs. Offering Layer 2 data packet switching and stable operation, this model also complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price. The GSW-5240HP is equipped with 48 10/100/1000BASE-T Gigabit Ethernet ports and 4 1000BASE-X SFP interfaces with inner power system. Its 48 Gigabit Ethernet ports are integrated with an 802.3at PoE+ injector function. It offers a rack-mountable, safe and reliable power solution for SMBs deploying Power over Ethernet networks. Though it includes robust features designed for Enterprises Ethernet networks, its Plug and Play makes configuration easy.IEEE 802.3at PoE+ Compliant Power Source SwitchThe PoE in-line power following the IEEE 802.3at/af standard makes the GSW-5240HP able to deliver Gigabit speed data and up to 30 watts of power per port to 48 PoE compliant powered devices (PDs) with a combined power output budget of up to 370 watts. The GSW-5240HP provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.Intelligent Powered Device Alive CheckThe GSW-5240HP can monitor connected PD status in real time via PD alive check function. Once the PD stops working and responding, the GSW-5240HP will resume the PoE power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.Energy-saving DesignThe GSW-5240HP uses a new engine that incorporates two advanced Green Networking technologies:Idle Mode Link Down Power SavingsIntelligent Use of Power based on Cable LengthThe GSW-5240HP Gigabit Ethernet Switch is designed to provide high-performance and energy-saving solutions, especially suitable for environments that require stable network connections. It supports Energy Efficient Ethernet (EEE) function (IEEE 802.3az), automatically adjusting power consumption based on network traffic. With a maximum total power distribution of 370W for 802.3at PoE, it efficiently powers PoE-enabled devices, such as IP cameras, wireless access points and VoIP phones, ensuring stable operation.In addition, the GSW-5240HP also features the advanced Ethernet Link Energy-saving technology. With the energy-saving feature, it can automatically reduce power consumption and further improve energy efficiency when the connected device is idle or turned off. The design that intelligently adjusts the power consumption according to the cable length can minimize unnecessary energy consumption and achieve efficient and economical operation. This switch is ideal for business and home networks, balancing performance, environmental protection and cost-effectiveness.Easy Installation and Cable ConnectionProviding data transfer and high PoE in one unit, the GSW-5240HP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All the RJ45 copper interfaces of the GSW-5240HP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.Flexible Extension SolutionThe four mini-GBIC slots built in the GSW-5240HP are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
