Võrguseadmed

8 x Fast Ethernet PoE+ porti 200W PoE võimsuse eelarve 1,6 Gbps kommutatsioonivõimsus Kaitsekindel IP30 klassifikatsiooniga metallist lüliti Sisaldab DIN-riba kinnitust ja seinakinnitusklambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse võimsuse Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-S24052, TI-S24048). TRENDneti tööstuslikel Fast Ethernet PoE+ DIN-riba lülititel on vastupidav IP30-klassi metallist korpus. Need tööstuslikud haldamata PoE+ lülitid on kavandatud taluma tugevat vibratsiooni ja lööki ning töötama nii kõrgetel kui ka madalatel temperatuuridel tööstuskeskkondades -40° - 75° C (-40° - 167° F). Redundantsed toitesisendid koos ülekoormusvoolukaitsega igas tööstuslikus haldamata PoE+ kommutaatoris vähendavad võrgu seisakuid miinimumini. paigaldajad ja integraatorid saavad TRENDneti tööstuslike Fast Ethernet kommutaatorite abil säästa seadmete kulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE-toite ja andmeid ühe pordi kohta olemasolevate Ethernet-kaablite kaudu. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti, et edastada nii andmeid kui ka toitu tööstuslikust haldamata PoE+-kommutaatorist. Nende haldamata tööstuslike PoE+ kommutaatoritega saate hõlpsasti ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ- ja muid täiustatud IP-kaameraid, VoIP-telefonisüsteeme, IPTV-dekoodereid, juurdepääsukontrolli ja muud.     PoE+ võimsus 200 W PoE+ võimsuse eelarve varustab kuni kaheksa Power over Ethernet seadet PoE+ toiteallikaga.     Redundantne toide Kaks toitesisendit pakuvad ülekoormusvoolukaitsega redundantset toite ja väljundhäirereleed, mis annavad märku sisendtoite rikke kohta.     Tööstuskindel disain Varustatud vastupidava IP30 klassifikatsiooniga korpusega, mis on kavandatud taluma suurt vibratsiooni ja lööki ning töötama laias temperatuurivahemikus -40° - 75° C (-40° - 167° F).         PoE+ toide Haldamata tööstuslikud PoE+ lülitid annavad igaüks kuni 30 W võimsust pordi kohta ja andmeid ühe Ethernet-kaabli kaudu PoE-seadmetele.     Lihtne paigaldus Ei ole vaja konfigureerimist, lihtsalt ühendage PoE+ võrguseadmed tööstusliku haldamata PoE+ kommutaatoriga.     Paigaldusriistvara IP30 klassifikatsiooniga metallist korpus koos DIN-riba ja seinakinnituse riistvaraga, mis on lisatud.     Redundantne toide Kaks sisendit tagavad üleliigse voolu kaitse (toiteallikas müüakse eraldi, mudel: TI-S24052, TI-S24048).     Lai temperatuurivahemik Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) võimaldab paigaldamist tööstuskeskkondades, kus on äärmiselt kuumad või külmad tingimused.     Löögi- ja vibratsioonikindlus Hinnatud löökidele (EN 60068-2-27), vabalangemisele (EN 60068-2-32) ja vibratsioonile (EN 60068-2-6).     Elektromagnetiline vastavus Vastutab 6kV | õhk: 8kV, (IEC 61000-4-4) EFT: võimsus: 2kV | signaal: 2kV, (61000-4-5) ülepinge: Võimsus: 2kV | Signaal: 2kV

LANBERG patchcord cat.5e 30m black

CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.

D-LINK Hub Nuclias Connect

EXTREMECLOUD IQ : INDOOR WIFI 6 AP, 2X2 RADIOS WITH DUAL 5GHZ AND 1X1GE PORT. INTEGRATED LIGHT/POWER SENSORS & BLE/ZIGBEE. AI/ML GREEN MODE. EXTERNAL ANTENNA SUPPORT. ANTENNAS SOLD SEPARATELY. INCLUDES CONNECT. DOMAIN : REST OF WORLD

Brennenstuhl pikendusjuhe 3G1,5 6p+L 5m must/ helehall

Brennenstuhl Steckdosenleiste ECO-Line 6x 1.5m silbergra

Features: Extends IR Range Up to 25 m (82 ft) Weather Resistent for Outdoor Use Powered and Controlled by the UniFi Video Camera Compatible with UniFi Video Camera G3 model UVC-G3

POWER WALKER UPS Line-Interactive 1000VA

PLANET 10/100/1000Base-T to Dual 1000Base-X SFP (1 TP, 2

ParametersParameterValueFrequency1575.42-1602 MHzPolarizationRHCPGain3.5 dBiV.S.W.R< 1.5Impedance50 ΩMax Axial Ratio3 dBLNA Gain28±2 dBLNA Noise Figure< 1.5 dBSupply Voltage2.2 - 5 VDCCurrent Consumption< 15 mALNA V.S.W.R< 2.0CableRG174 3000 mmConnectorSMA MaleMounting MethodAdhesiveOperating Temperature-40 to +85Operating Relative Humidity95 % maxROHS Compliant✔

Tellur TLL331161

Inter-Tech DMG-35 USB 2.0 Netzwerkadapter

Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet&#39;s Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch&#39;s or injector&#39;s PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V &ndash; 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch&#39;s or injector&#39;s supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V &ndash; 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing

1 x 100/1000BASE-T PoE sisendport 1 x 100/1000BASE-SX/LX SFP-pesa PoE toiteallikaga - toiteadapterit ei ole vaja SFP-pesa mahutab multimoodseid või ühemoodseid mooduleid Toetab Link Fault Pass-Through (LFPT) Jumbo Frame (9KB) toetus TRENDneti Gigabit PoE PD SFP Fiber Media Converter, mudel TFC-PGSFP, teisendab 100/1000BASE-T vask-Etherneti 1000BASE-SX/LX Fiber SFP meediumiks ja vastupidi. TFC-PGSFP saab mugavalt toite PoE-lülitist või injektorist, toiteadapterit ei ole vaja. Sellel on üks gigabitine PoE-sisendport toite- ja andmeside jaoks ning üks SFP-pesa, mis toetab nii multimoodilisi (SX) kui ka ühemoodilisi (LX) SFP-mooduleid. SFP-pesa mahutab nii Fast Ethernet kui ka Gigabit SFP-mooduleid, mis tagab täiendava paigaldamise paindlikkuse. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid multimood- või ühemood-kiudoptiliste rakenduste jaoks. PoE toiteallikaga Ei ole vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 jalga) kaugusele. Kompaktne Väike ja kompaktne metallkorpuse disain tagab suurema paigaldamise paindlikkuse. Pordid 1 x 100/1000BASE-T RJ-45 PoE sisendport, 1 x 100/1000BASE-SX/LX SFP-pesa. PoE toiteallikaga Ei vaja toiteadapterit - see kiudoptiline SFP-muundur saab toite 802.3af/at PoE-lülitist või injektorist kuni 100 m (328 ft.) kaugusele. Kahe kiirusega SFP-pesa Kahe kiirusega SFP-pesa toetab nii 100Mbps kui ka 1000Mbps SFP-mooduleid Jumbo Frame Saadab suuremaid pakette ehk jumbokaadreid (kuni 9 KB), et suurendada jõudlust.

Der DMG-31 von PowerOn verbindet Desktops mit einem High-Speed WLAN-Netzwerk. Er ist kompatibel mit den 802.11a/b/g/n (WiFi 4) Standards und erreicht Geschwindigkeiten von bis zu 300 Mbit/s bei 2,4GHz über einen freien PCIe x1 Port. Die zwei leistungsstarken 3dBi Antennen sorgen nicht nur für einen ordentlichen Datendurchsatz, sondern gewährleisten auch eine unterbrechungsfreie Datenübertragen auf größere Distanzen.

• 920 watts power supply unit • Improved failover of selected LANCOM access switches • Hot-swappable – can be applied during operation • 820 watts PoE power supply and 1,440 watts PoE power supply when used as a second PSU in boost mode • 720 watts PoE power supply for the LANCOM GS-4530XP (limited by the number of ports) • Input voltage: 110 VAC and 230 VAC • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C

Intel WLAN 6E AX211 M.2 vPro bulk

Throughput: 40 MAC address table size: 16000 Jumbo frame size: 9 Weight: 1.52

Throughput: 40 MAC address table size: 16000 Jumbo frame size: 9 Power consumption: 12.17 Weight: 1.12

Cable length: 2

Logilink Wireless ultra fast 1200Mbps 11ac adapter

Belkin AVC006btSGY. Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Jaoturi liidesed: HDMI, USB 3.2 Gen 1 (3.1 Gen 1) Type-A, USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Maksimaalne resolutsioon (HDMI): 3840 x 2160 pikslit. ...

I/O HUB USB-C 3PORT HALYX/24191 TRUST

Perfect Managed Switches with Advanced L2/L4 Switching and Security PLANET GS-4210-24T4S and GS-4210-24T4SR are the ideal Gigabit Switches which provide cost-effective advantage to local area networks and are widely accepted in the SMB office network. They offer intelligent L2/L4 data packet switching and management functions, friendly web user interface and stable operation. Besides the popular IPv6/IPv4 management and abundant L2/L4 switching functions, the GS-4210-24T4S and GS-4210-24T4SR come with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T4S and GS-4210-24T4SR are equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 4 additional 100/1000BASE-X SFP interfaces with built-in AC or AC+DC redundant power system. They offer a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-24T4S(R) supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-24T4S(R) supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Redundant AC/DC Power Supply to Ensure Continuous Operation The GS-4210-24T4SR is particularly equipped with one 100~240V AC power supply unit and one 36~72V DC power supply unit to provide an enhanced reliable and scalable redundant power supply, the continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 36~72V DC power supply, the GS-4210-24T4SR is able to act as a telecom-level device that can be located in the electronic room. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24T4S and GS-4210-24T4SR help the SMBs to step in the IPv6 era with the lowest investment as their network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-24T4S and GS-4210-24T4SR can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24T4S and GS-4210-24T4SR allow the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-24T4S and GS-4210-24T4SR are loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. They guarantee the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-24T4S and GS-4210-24T4SR offer comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. They can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Their protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Friendly and Secure Management For efficient management, the GS-4210-24T4S and GS-4210-24T4SR are equipped with web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T4S and GS-4210-24T4SR offer an easy-to-use, platform-independent management and configuration facility. For text-based management, the switches can be accessed via Telnet and the console port. By supporting the standard SNMP, the switches can be managed via any standard management software Moreover, the GS-4210-24T4S and GS-4210-24T4SR offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The GS-4210-24T4S and GS-4210-24T4SR provide 4 extra Gigabit SFP interfaces supporting 100BASE-FX/1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T4S and GS-4210-24T4SR successfully reduce substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T4S and GS-4210-24T4SR are able to operate stably and quietly in any environment without affecting their performance. Department/Edge Security and QoS Switch The GS-4210-24T4S and GS-4210-24T4SR connect up to 24 high-speed workstations in the Ethernet environment, in which their four SFP mini-GBIC interfaces provide an uplink to a department backbone. Moreover, the Switches provide 56Gbps switch fabric and high bandwidth for backbone connection. The GS-4210-24T4S and GS-4210-24T4SR improve the network efficiency and safeguard the network clients with their powerful features: IPv6/IPv4 management Layer 2 to Layer 4 security QoS 802.1x port-based and MAC-based network access authentication security Multicast IGMP snooping The advanced functionality of the GS-4210-24T4S and GS-4210-24T4SR eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-24T4S and GS-4210-24T4SR one of the best and most cost-effective switch solutions for SMBs. High-performance Backbone/Server Farm Switch Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 56Gbps non-blocking switch fabric, the GS-4210-24T4S and GS-4210-24T4SR can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The GS-4210-24T4S and GS-4210-24T4SR can offer the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules with the two SFP ports. FTTX/MAN Application The GS-4210-24T4S and GS-4210-24T4SR apply the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMP v3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With two dual-speed SFP slots built in, the deployment distance of the GS-4210-24T4S and GS-4210-24T4SR can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the GS-4210-24T4S and GS-4210-24T4SR can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. Physical Port 24-Port 10/100/1000BASE-T Gigabit RJ45 copper 4 100/1000BASE-X mini-GBIC/SFP slots RJ45 console interface for switch basic management and setup Reset button for system factory default Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic

High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode &ndash; downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode &ndash; downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.

Unmanged Network Switch 2.5G Ethernet Black

Robustly Designed for Critical Business Applications Designed to be installed in heavy industrial demanding environments, the IGS-4215-8T2S is the new member of PLANET Industrial-grade, DIN-rail type&nbsp;L2/L4 Managed Gigabit Switch&nbsp;family to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with&nbsp;8 10/100/1000BASE-T ports, and&nbsp;2 extra 100/1000BASE-X SFP fiber ports&nbsp;for data and video uplink. The IGS-4215-8T2S is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with operating temperature ranging from -40 to 75 degrees C in a rugged&nbsp;IP30&nbsp;metal housing. &nbsp; &nbsp; &nbsp; Environmentally Hardened Design With the IP30 industrial case, the IGS-4215-8T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-8T2S can be placed in almost any difficult environment. &nbsp; Robust Protection The IGS-4215-8T2S provides contact discharge of &plusmn;6KV DC and air discharge of &plusmn;8KV DC for Ethernet ESD protection. It also supports &plusmn;4KV surge immunity to improve product stability and protects users&rsquo; networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. &nbsp; Redundant Ring, Fast Recovery for Surveillance System The IGS-4215-8T2S supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced&nbsp;ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)&nbsp;technology, Spanning Tree Protocol (802.1s MSTP), and&nbsp;redundant power&nbsp;input system into customer&rsquo;s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as &lt; 450ms. &nbsp; &nbsp; Robust Layer 2 Features The IGS-4215-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN,&nbsp;Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP),&nbsp;loop&nbsp;and&nbsp;BPDU guard,&nbsp;IGMP snooping, and&nbsp;MLD snooping. Via the link aggregation, the IGS-4215-8T2S allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well.&nbsp; Also, the&nbsp;Link Layer Discovery Protocol (LLDP)&nbsp;is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. &nbsp; &nbsp; IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the IGS-4215-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.&nbsp; &nbsp; &nbsp; Efficient Traffic Control The IGS-4215-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast&nbsp;storm control, per port&nbsp;bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. &nbsp; User-friendly and Secure Management For efficient management, the IGS-4215-8T2S is equipped with Command line, Web and SNMP management interfaces. With the built-in&nbsp;Web-based&nbsp;management interface, the IGS-4215-8T2S offers an easy-to-use, platform-independent management and configuration facility. For&nbsp;text-based&nbsp;management, it can be accessed via Telnet and SSHv2 protocol. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. .&nbsp; &nbsp; Powerful Security from Layer 2 to Layer 4 PLANET IGS-4215-8T2S offers comprehensive&nbsp;IPv4/IPv6&nbsp;Layer 2 to Layer 4&nbsp;Access Control List (ACL)&nbsp;for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises&nbsp;802.1X port-based&nbsp;user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the&nbsp;Protected Port&nbsp;function, communication between edge ports can be prevented to guarantee user privacy. Furthermore,&nbsp;Port Security&nbsp;function allows limiting the number of network devices on a given port.&nbsp; &nbsp; Advanced Network Security&nbsp; The IGS-4215-8T2S also provides&nbsp;DHCP Snooping,&nbsp;IP Source Guard&nbsp;and&nbsp;Dynamic ARP Inspection&nbsp;functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. &nbsp; Flexibility and Long-distance Extension Solution The two additional SFP slots built in the IGS-4215-8T2S support 100BASE-FX /1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. &nbsp;&nbsp;&emsp; Intelligent SFP Diagnosis Mechanism The IGS-4215-8T2S supports&nbsp;SFP-DDM (Digital Diagnostic Monitor)&nbsp;function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. &nbsp; Industrial-grade Switch for Building Automation and Security Suitable for buildings where security is strictly to be enforced, the IGS-4215-8T2S, with eight high-speed Gigabit Ethernet interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment.&nbsp; &nbsp; &nbsp; Model that Withstands Harsh Operation and Extends Distance The IGS-4215-8T2S is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-4215-8T2S is easy and helpful to build a Gigabit high-bandwidth switched network quickly. &nbsp;

Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from&nbsp;-40 to 75 degrees C&nbsp;allows the IFT-80xT series to be placed in almost any difficult environment. Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance. Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs. Transport Networking PLANET&rsquo;s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as&nbsp;control cabinet of transportation, factory floors&nbsp;or and&nbsp;environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation. &nbsp; Fiber-optic Networking for ISPs, Enterprises, and Homes With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.

8 x Gigabit PoE+ porti PoE v&otilde;imsuse eelarve 120W@24V - 200W@48V 16Gbps kommutatsiooniv&otilde;imsus Karastatud IP30 klassifikatsiooniga metallist l&uuml;liti Sisaldab DIN-riba ja seinakinnitusi T&ouml;&ouml;temperatuuri vahemik -40&deg; - 75&deg; C (-40&deg; - 167&deg; F) Kaks 24-56 V alalisvoolu sisendit redundantsuse tagamiseks &nbsp; TRENDneti 8-portiline t&ouml;&ouml;stuslik Gigabit PoE+ DIN-Rail l&uuml;liti, mudel TI-PG80B, on t&ouml;&ouml;stuslik muutuva pingega l&uuml;liti, millel on kaheksa gigabit PoE+ porti ja 200 W PoE-v&otilde;imsuse eelarve. Kasutajatel on v&otilde;imalik &uuml;hendada kaheksa PoE+ seadet selle t&ouml;&ouml;stusliku muutuva pingega PoE+ kommutaatoriga, et tagada kiire &uuml;henduvus v&otilde;rku. T&ouml;&ouml;stuslik muutuva pingega PoE+-l&uuml;liti on varustatud vastupidava IP30-klassi metallkorpusega ning see on kavandatud taluma suurt vibratsiooni ja l&ouml;&ouml;ki, t&ouml;&ouml;tades samal ajal laias temperatuurivahemikus -40&deg; - 75&deg; C (-40&deg; - 167&deg; F) t&ouml;&ouml;stuskeskkonnas. T&ouml;&ouml;stusliku muutuva pinge l&uuml;liti kaks 24-56 V alalisvoolu sisendit tagavad redundantsi koos toitealarmi releega.

Converts a non-PoE port to a PoE++ Gigabit port Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W) Integrated power supply Network a PoE device up to 100m (328 ft.) away Save on installation and equipment costs IEEE 802.3af/at/bt compliant

See Delocki HDD / SSD dokkimisjaam võimaldab kahe 2,5&Prime; või 3,5&Prime; SATA HDD / SSD välise ühendamist USB-liidese kaudu. See lahendus ei nõua välist korpust, kuna HDD / SSD ühendatakse otse dokkimisjaama. Lisaks võimaldab kloonimisfunktsioon kopeerida ühe kõvaketta sisu teisele ilma arvutit kasutamata.

This SAS cable by Delock can be used to connect internal SAS devices, e.g. a controller with Mini SAS connector to 4 Ds with SAS ports.

• AC2600 ultimate AC kiirus: 800+1733 Mbps • WiFi 5 (802.11ac) kuni 1733 Mbps • Töösagedus 2.4 GHz / 5 GHz • 4G ja Nano SIM kaardipesa

Cisco, C9200L-STACK-KIT= ,0,48m

The ultra-small USB adapter comes with Bluetooh 5.0 technology which allows fast pairing and stable and energy-saving connectivity. Turn non-Bluetooth PCs or laptops into Bluetooth-capable devices; making it possible to connect with Bluetooth headphones, speakers, keyboards, mice, etc. You can use the USB-C and USB-A port as you like and thanks to the mini size the BT0054 by LogiLink is also easily portable and perfect for on the go.

• Off-Load Checksum-, UDP-, TCP-, IP- & Segmentation calculation • VT-c (VMDq, SR-IOV) • RSS, MSI-X

Silex DS 700AC Wireless/Wired Hi-Speed USB Device Server

USB Bluetooth v.5.0 dongle - ENJOY THE FREEDOM OF WIRELESS TECHNOLOGY - Large operating distance - Easily connect any Bluetooth device to your PC - Fast & easy file transfer between your PC and mobile devices - Perfect for streaming high quality stereo music - Windows 11 compatible Type Adapter Bluetooth 5.0, Wireless Frequency Range 2.402 - 2.48 GHz

Mikrotik CCR2216-1G-12XS-2XQ